A safe temp for my 1700

**Gimlin** · Apr 11th, 2002, 09:43 PM

what is the highest safe temp my 1700 can go?

**JungleMan** · Apr 11th, 2002, 09:46 PM

Highest SAFE temp...probably 60ish

I wouldn't EVER go that high though.

What's it at now? Is it OCed?

Mines at 44.

**Gimlin** · Apr 11th, 2002, 09:58 PM

Thing is it still dont know what my if the temp its reading is my CPU it might just be the board temp.

It says its 42 C could the board be that high?

**JungleMan** · Apr 11th, 2002, 09:59 PM

Originally posted by Gimlin
Thing is it still dont know what my if the temp its reading is my CPU it might just be the board temp.

It says its 42 C could the board be that high?

Is the sensor set to Winbond 2? I think that's usually the CPU...

42C sounds about right...

**Gimlin** · Apr 11th, 2002, 10:08 PM

according to Smartguarding temp1 is 201 C and temp 2 is 40-42. In the bios temp 1 is 40-42 and temp 2 is -51C its all ****ed up

**JungleMan** · Apr 11th, 2002, 10:19 PM

Originally posted by Gimlin
according to Smartguarding temp1 is 201 C and temp 2 is 40-42. In the bios temp 1 is 40-42 and temp 2 is -51C its all ****ed up

Actually it's not. 40-42 seems right...

**JungleMan** · Apr 12th, 2002, 06:10 AM

Yep. Actually a little low since your cooler really isn't the greatest. Or maybe it is good

**Gandalf_Grey_** · Apr 12th, 2002, 08:25 AM

mine usually hovers in the high 40's, my case is nice and cool though

i have a bunch of case fans

**numtel** · Apr 12th, 2002, 08:31 AM

Whoo! 35C on my 1600

**Gimlin** · Apr 12th, 2002, 09:01 AM

Is there a way to increase teh FBS by 1 increments?

**JungleMan** · Apr 12th, 2002, 02:25 PM

Originally posted by Gimlin
Is there a way to increase teh FBS by 1 increments?

It's FSB

And you do it in the BIOS. Haven't you overclocked yet?

**Gimlin** · Apr 12th, 2002, 03:05 PM

no lol I tryed 140 and it wouldnt get past the bios. So I thought I would try 1 increments.

**Gimlin** · Apr 12th, 2002, 04:17 PM

Ok I just tired the 140 fsb again it asks me for boot disk ???

**nabeels786** · Apr 12th, 2002, 04:39 PM

my o/ced 1700 is at 1900, and my temps are 38-41

try raising your voltage

**Gimlin** · Apr 12th, 2002, 05:15 PM

my vcore is 1.77 right now

**JungleMan** · Apr 12th, 2002, 05:18 PM

Originally posted by Gimlin
my vcore is 1.77 right now

Bump it up a little higher, along with your DDR voltages...then try it

**Gandalf_Grey_** · Apr 12th, 2002, 05:31 PM

i havn't overclocked, my CPU temps are high enough as it is, i want to get a CPU fan that goes at a higher speed, the one i have sucks ****

**JungleMan** · Apr 12th, 2002, 05:43 PM

Originally posted by Gandalf_Grey_
i havn't overclocked, my CPU temps are high enough as it is, i want to get a CPU fan that goes at a higher speed, the one i have sucks ****

I think you'd more benefit from a better heatsink and fan than you would from just a new fan. Most local shops use ****ty heatsinks and no thermal paste

**nabeels786** · Apr 12th, 2002, 05:51 PM

yeah thermal paste and a good heatsink will help...im running on .750 and o/c to 145 fsb with 39c-41c

**JungleMan** · Apr 12th, 2002, 06:09 PM

Originally posted by nabeels786
yeah thermal paste and a good heatsink will help...im running on .750 and o/c to 145 fsb with 39c-41c

Yep. If your board fits it get a Thermalright AX-7 a tube of AS3 and a quiet 80mm fan..

**Gandalf_Grey_** · Apr 12th, 2002, 07:36 PM

hmm i wonder if they did put thermal paste on mine, although i really don't care to check incase i crack the CPU putting that monster heatsink back on (it is actually a nice one

)

**Gimlin** · Apr 12th, 2002, 09:13 PM

Originally posted by Gimlin
Ok I just tired the 140 fsb again it asks me for boot disk ???

Why does this happen?

**JungleMan** · Apr 12th, 2002, 09:15 PM

Originally posted by Gimlin

Why does this happen?

Maybe your hard drive really hates any type of FSB OC.

What drive is it?

**Gimlin** · Apr 12th, 2002, 10:30 PM

MAXTOR D740X-6L 20GB 7200RPM 2MB 8.5MS ATA133 INT IDE

**JungleMan** · Apr 12th, 2002, 10:31 PM

Originally posted by Gimlin
MAXTOR D740X-6L 20GB 7200RPM 2MB 8.5MS ATA133 INT IDE

Funny, my Maxtor has no problems with OC

maybe it's just the Soltek board

oh well...you don't really notice it anyway

**Gimlin** · Apr 13th, 2002, 07:59 AM

I dont think its the board because others have OC with my board and 1700 on other forums. Mabye its my ram.

**JungleMan** · Apr 13th, 2002, 08:53 AM

Originally posted by Gimlin
I dont think its the board because others have OC with my board and 1700 on other forums. Mabye its my ram.

What brand of RAM are you using?

**Gimlin** · Apr 13th, 2002, 09:05 AM

SAMSUNG PC2100 128MB DDR 266MHZ CAS2.5 OEM

**JungleMan** · Apr 13th, 2002, 09:06 AM

Originally posted by Gimlin
SAMSUNG PC2100 128MB DDR 266MHZ CAS2.5 OEM

Hmm.

You've raised your CPU and DDR voltages? If you don't raise the voltages it won't overclock

**Gimlin** · Apr 13th, 2002, 09:07 AM

Originally posted by jpbtennisman

Hmm.

You've raised your CPU and DDR voltages? If you don't raise the voltages it won't overclock

Well then how might I do that

**JungleMan** · Apr 13th, 2002, 09:10 AM

Originally posted by Gimlin

Well then how might I do that

Should be right in the BIOS...or try some jumpers.

Check your board manual...

The important thing is not to raise them too high. Tell me what your going to raise them to before you do so.

Mine is at +0.70 for the DDR (I think) and +0.1 for the CPU.

**Gimlin** · Apr 13th, 2002, 09:13 AM

So 1.87 for the cpu and what for Ram? up .70?

**JungleMan** · Apr 13th, 2002, 09:14 AM

See how high the settings go and get back to me

Just SEE how high they go don't change them quite yet, although you can bump the CPU up to 1.85 or somit

**Gimlin** · Apr 13th, 2002, 09:24 AM

The highes the CPu can go is 1.85 and I couldnt find the Mem V

**JungleMan** · Apr 13th, 2002, 09:26 AM

Originally posted by Gimlin
The highes the CPu can go is 1.85 and I couldnt find the Mem V

Bring teh CPU to 1.85 and then try it doubt youll get anywhere.

No mem voltage did you check teh manual?

**Gimlin** · Apr 13th, 2002, 09:59 AM

Originally posted by jpbtennisman

Bring teh CPU to 1.85 and then try it doubt youll get anywhere.

No mem voltage did you check teh manual?

Doubt i'll get anywhere? The mem can go to 2.7 after looking at the manuel. Is there a danger of damaging anything with V that high?

**JungleMan** · Apr 13th, 2002, 10:08 AM

Originally posted by Gimlin

Doubt i'll get anywhere? The mem can go to 2.7 after looking at the manuel. Is there a danger of damaging anything with V that high?

What's default for the memory?

What I'm saying is if you don't raise the DDR voltage you probably won't get anywhere.

**Gimlin** · Apr 13th, 2002, 10:09 AM

2.5

**JungleMan** · Apr 13th, 2002, 10:10 AM

Sure, raise it to 2.7

**Gimlin** · Apr 13th, 2002, 10:11 AM

Ok you sure lol, so CPU V to 1.85 and Mem to V 2.7 promise me I wont fry anything!

Thread: A safe temp for my 1700

Thread Tools

Display

A safe temp for my 1700

Posting Permissions