Results 1 to 13 of 13

Thread: Is my RAM correct? [RESOLVED]

  1. #1

    Thread Starter
    Supreme User Madboy's Avatar
    Join Date
    Oct 2003
    Location
    England
    Posts
    3,253

    Resolved Is my RAM correct? [RESOLVED]

    It shows up as 111Mb ram, but is it not supposed to be 128.0Mb ram?
    Last edited by Madboy; May 5th, 2005 at 06:08 AM. Reason: Resolved

  2. #2
    Banned dglienna's Avatar
    Join Date
    Jun 2004
    Location
    Center of it all
    Posts
    17,901

    Re: Is my RAM correct?

    Well, no doubt there is a 128M stick in your machine (or 2 64M sticks)
    but your CPU is tying up a small portion of the RAM for internal memory.
    That is not unusual. In fact, we were discussing it a while back. My computer is supposted to have 256M, but it starts up with 240 or so, and when I boot up it drops down to 220 and goes down from there. Things work fine as long as things don't drop below 160M. Norton tells me what I have while it's running.

  3. #3
    Hyperactive Member
    Join Date
    Jul 2002
    Location
    WGTN, New Zealand
    Posts
    338

    Re: Is my RAM correct?

    Quote Originally Posted by dglienna
    Well, no doubt there is a 128M stick in your machine (or 2 64M sticks)
    but your CPU is tying up a small portion of the RAM for internal memory.
    That is not unusual. In fact, we were discussing it a while back. My computer is supposted to have 256M, but it starts up with 240 or so, and when I boot up it drops down to 220 and goes down from there. Things work fine as long as things don't drop below 160M. Norton tells me what I have while it's running.
    Actually it is more likely being reserved as Video RAM. The CPU does not reserve anything. It's very unlikely that it is showing up an odd number, though. Go into your BIOS settings (press DEL during the first few seconds of boot), and if you have a Phoenix BIOS installed, you will be given a menu, and of the first three or four is an option which allows you to alter how much video RAM you need. If you never play games etc, set it low, otherwise if you run graphic intensive apps, set it high.

    On most new motherboards with integrated graphics chipsets, please be aware that they only have about 512kb of memory themselves, and require the use of installed RAM.

    If you do use graphic intensive apps, it's much wiser to buy a graphics adapter with its own memory.

  4. #4

    Thread Starter
    Supreme User Madboy's Avatar
    Join Date
    Oct 2003
    Location
    England
    Posts
    3,253

    Re: Is my RAM correct?

    On my old pc, i had 128.0Mb ram, when i right clicked My Computer > Performance it showed up 128.0, how come this pc only shows 111Mb then? I thought it was impossible, and memory only came n 64,128,256,512Mb ram?

  5. #5
    Banned dglienna's Avatar
    Join Date
    Jun 2004
    Location
    Center of it all
    Posts
    17,901

    Re: Is my RAM correct?

    I called it a cpu, when in fact it is all the hardware in the system that may use up RAM. You are right about 64/128/256/512 MB.

  6. #6

    Thread Starter
    Supreme User Madboy's Avatar
    Join Date
    Oct 2003
    Location
    England
    Posts
    3,253

    Re: Is my RAM correct?

    Ok, but the actual question was, can i get it to show up as 128, or does it mean my Ram might be broke?

  7. #7
    VBA Nutter visualAd's Avatar
    Join Date
    Apr 2002
    Location
    Ickenham, UK
    Posts
    4,906

    Re: Is my RAM correct?

    Like dreamlax and dglienna have said, other hardware may be using your system memory too. Most likely the graphics system if you are using an old PC. As mentioned earlier, you can see the total amount of "Physical Memory" present in your PC when your computer starts up by going into the BIOS.
    PHP || MySql || Apache || Get Firefox || OpenOffice.org || Click || Slap ILMV || 1337 c0d || GotoMyPc For FREE! Part 1, Part 2

    | PHP Session --> Database Handler * Custom Error Handler * Installing PHP * HTML Form Handler * PHP 5 OOP * Using XML * Ajax * Xslt | VB6 Winsock - HTTP POST / GET * Winsock - HTTP File Upload

    Latest quote: crptcblade - VB6 executables can't be decompiled, only disassembled. And the disassembled code is even less useful than I am.

    Random VisualAd: Blog - Latest Post: When the Internet becomes Electricity!!


    Spread happiness and joy. Rate good posts.

  8. #8
    Hyperactive Member
    Join Date
    Jul 2002
    Location
    WGTN, New Zealand
    Posts
    338

    Re: Is my RAM correct?

    Quote Originally Posted by visualAd
    Like dreamlax and dglienna have said, other hardware may be using your system memory too. Most likely the graphics system if you are using an old PC. As mentioned earlier, you can see the total amount of "Physical Memory" present in your PC when your computer starts up by going into the BIOS.
    It is quite common even for newer motherboards to come with a built in graphics adapter. Even big computer distributors like Dell and Acer simply use in-built adapters as it is far cheaper than buying a separate one. They require a minimal amount of RAM themselves (which is why they usually come with 512kB), just in case the computer is booted with no installed memory, but ultimately it is the first piece of hardware to grab memory. As far as the operating system goes, it considers extended RAM and video RAM to be entirely independent of each other.

    For there to be 111 MB of RAM, you must have 128 MB installed, and 16 MB reserved for video. The remaining 1 MB is probably a rounding error. Don't worry about it though, and if it really bothers you, then you have two options. Shell out for a new graphics adapter, or take the cheaper option of buying a little extra RAM.

    Edit:
    Actually, I could be wrong here, but if you have a SoundBlaster AWE32 or any SoundBlaster released after that, some RAM may be reserved for the default SoundFont. The earlier AWE32 and AWE64 had RAM of its own, and I know for sure that newer models first enquire with the operating system about snatching RAM (and Windows would still report the full amount (less the video RAM of course)), but some models might snatch RAM before the operating system even loads.
    Last edited by Dreamlax; May 5th, 2005 at 03:58 AM.

  9. #9

    Thread Starter
    Supreme User Madboy's Avatar
    Join Date
    Oct 2003
    Location
    England
    Posts
    3,253

    Re: Is my RAM correct?

    ok, i see now

    Thanks

  10. #10
    Frenzied Member thegreatone's Avatar
    Join Date
    Aug 2003
    Location
    Oslo, Norway. Mhz:4800 x12
    Posts
    1,333

    Re: Is my RAM correct? [RESOLVED]

    I kow your pain, mine used to show up as 703MB RAM... i recently bought a ATI Radeon 9550 with 256MB RAM onboard, and now mine shows up fine @ 768MB RAM.

    I would also like to say that Ram goes up like so -
    16/32/64/128/256/512/1024/2048
    i have yet to see higher in a single stick :-P
    Zeegnahtuer?

  11. #11
    Hyperactive Member
    Join Date
    Jul 2002
    Location
    WGTN, New Zealand
    Posts
    338

    Re: Is my RAM correct? [RESOLVED]

    Quote Originally Posted by thegreatone
    i have yet to see higher in a single stick :-P
    Should see some of the servers they have now. The RAM is used like a hard drive now.

  12. #12
    Frenzied Member thegreatone's Avatar
    Join Date
    Aug 2003
    Location
    Oslo, Norway. Mhz:4800 x12
    Posts
    1,333

    Re: Is my RAM correct? [RESOLVED]

    Quote Originally Posted by Dreamlax
    Should see some of the servers they have now. The RAM is used like a hard drive now.
    Link me :P
    Zeegnahtuer?

  13. #13
    Frenzied Member <ABX's Avatar
    Join Date
    Jul 2002
    Location
    Canada eh...
    Posts
    1,622

    Re: Is my RAM correct? [RESOLVED]

    Quote Originally Posted by thegreatone
    Link me :P
    http://www.valueram.com/products/ProductList.asp

    (Search for 4096mb on the page to find it quick)

    Note that 4096mb is the absolute maximum (excluding workarounds :/) for a 32bit processor to use.

    The limit for a 64bit processor is 16TB (1TB = 1024GB = 1024^2 MB)
    Tips:
    • Google is your friend! Search before posting!
    • Name your thread appropriately... "I Need Help" doesn't cut it!
    • Always post your code!!!! We can't read your mind!!! (well, at least most of us!)
    • Allways Include the Name and Line of the Exception (if one is occuring!)
    • If it is relevant state the version of Visual Studio/.Net Framwork you are using (2002/2003/2005)


    If you think I was helpful, rate my post
    IRC Contact: Rizon/xous ChakraNET/xous Freenode/xous

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  



Click Here to Expand Forum to Full Width