Results 1 to 2 of 2

Thread: PING

  1. #1

    Thread Starter
    Member
    Join Date
    Jul 2000
    Location
    Belgium/Kortrijk
    Posts
    34

    Cool

    Can someone give the code, how to ping an IP-address, its seems to have disappeared from this site.

    Another question. Is it possible to create and send TCP/IP packets with VB???

    Thnx,
    CtrAck
    Vb-Addicted
    Diederik Van Durme
    18/m/Belgium:Kortrijk

  2. #2
    Guest
    You could ping through dos.
    Ping [IP Address]

    Or through VB code:

    Code:
    '1) Place a command button on the form and place this code in the Click event
       Dim ECHO As ICMP_ECHO_REPLY
       Dim pos As Integer
    
      'ping an ip address, passing the
      'address and the ECHO structure
       Call Ping("209.48.177.35", ECHO)
    
      'display the results from the ECHO structure
       Form1.Print GetStatusCode(ECHO.status)
       Form1.Print ECHO.Address
       Form1.Print ECHO.RoundTripTime & " ms"
       Form1.Print ECHO.DataSize & " bytes"
    
       If Left$(ECHO.Data, 1) <> Chr$(0) Then
          pos = InStr(ECHO.Data, Chr$(0))
          Form1.Print Left$(ECHO.Data, pos - 1)
       End If
    
       Form1.Print ECHO.DataPointer
    
    '2) Add a .BAS module and paste this code in that module
    '3) Click the command button
    Option Explicit
    
    Public Const IP_STATUS_BASE = 11000
    Public Const IP_SUCCESS = 0
    Public Const IP_BUF_TOO_SMALL = (11000 + 1)
    Public Const IP_DEST_NET_UNREACHABLE = (11000 + 2)
    Public Const IP_DEST_HOST_UNREACHABLE = (11000 + 3)
    Public Const IP_DEST_PROT_UNREACHABLE = (11000 + 4)
    Public Const IP_DEST_PORT_UNREACHABLE = (11000 + 5)
    Public Const IP_NO_RESOURCES = (11000 + 6)
    Public Const IP_BAD_OPTION = (11000 + 7)
    Public Const IP_HW_ERROR = (11000 + 8)
    Public Const IP_PACKET_TOO_BIG = (11000 + 9)
    Public Const IP_REQ_TIMED_OUT = (11000 + 10)
    Public Const IP_BAD_REQ = (11000 + 11)
    Public Const IP_BAD_ROUTE = (11000 + 12)
    Public Const IP_TTL_EXPIRED_TRANSIT = (11000 + 13)
    Public Const IP_TTL_EXPIRED_REASSEM = (11000 + 14)
    Public Const IP_PARAM_PROBLEM = (11000 + 15)
    Public Const IP_SOURCE_QUENCH = (11000 + 16)
    Public Const IP_OPTION_TOO_BIG = (11000 + 17)
    Public Const IP_BAD_DESTINATION = (11000 + 18)
    Public Const IP_ADDR_DELETED = (11000 + 19)
    Public Const IP_SPEC_MTU_CHANGE = (11000 + 20)
    Public Const IP_MTU_CHANGE = (11000 + 21)
    Public Const IP_UNLOAD = (11000 + 22)
    Public Const IP_ADDR_ADDED = (11000 + 23)
    Public Const IP_GENERAL_FAILURE = (11000 + 50)
    Public Const MAX_IP_STATUS = 11000 + 50
    Public Const IP_PENDING = (11000 + 255)
    Public Const PING_TIMEOUT = 200
    Public Const WS_VERSION_REQD = &H101
    Public Const WS_VERSION_MAJOR = WS_VERSION_REQD \ &H100 And &HFF&
    Public Const WS_VERSION_MINOR = WS_VERSION_REQD And &HFF&
    Public Const MIN_SOCKETS_REQD = 1
    Public Const SOCKET_ERROR = -1
    
    Public Const MAX_WSADescription = 256
    Public Const MAX_WSASYSStatus = 128
    
    Public Type ICMP_OPTIONS
        Ttl             As Byte
        Tos             As Byte
        Flags           As Byte
        OptionsSize     As Byte
        OptionsData     As Long
    End Type
    
    Dim ICMPOPT As ICMP_OPTIONS
    
    Public Type ICMP_ECHO_REPLY
        Address         As Long
        status          As Long
        RoundTripTime   As Long
        DataSize        As Integer
        Reserved        As Integer
        DataPointer     As Long
        Options         As ICMP_OPTIONS
        Data            As String * 250
    End Type
    
    Public Type HOSTENT
        hName As Long
        hAliases As Long
        hAddrType As Integer
        hLen As Integer
        hAddrList As Long
    End Type
    
    Public Type WSADATA
        wVersion As Integer
        wHighVersion As Integer
        szDescription(0 To MAX_WSADescription) As Byte
        szSystemStatus(0 To MAX_WSASYSStatus) As Byte
        wMaxSockets As Integer
        wMaxUDPDG As Integer
        dwVendorInfo As Long
    End Type
    
    
    Public Declare Function IcmpCreateFile Lib "icmp.dll" () As Long
    
    Public Declare Function IcmpCloseHandle Lib "icmp.dll" _
       (ByVal IcmpHandle As Long) As Long
    
    Public Declare Function IcmpSendEcho Lib "icmp.dll" _
       (ByVal IcmpHandle As Long, _
        ByVal DestinationAddress As Long, _
        ByVal RequestData As String, _
        ByVal RequestSize As Integer, _
        ByVal RequestOptions As Long, _
        ReplyBuffer As ICMP_ECHO_REPLY, _
        ByVal ReplySize As Long, _
        ByVal Timeout As Long) As Long
    
    Public Declare Function WSAGetLastError Lib "WSOCK32.DLL" () As Long
    
    Public Declare Function WSAStartup Lib "WSOCK32.DLL" _
       (ByVal wVersionRequired As Long, _
        lpWSADATA As WSADATA) As Long
    
    Public Declare Function WSACleanup Lib "WSOCK32.DLL" () As Long
    
    Public Declare Function gethostname Lib "WSOCK32.DLL" _
       (ByVal szHost As String, _
        ByVal dwHostLen As Long) As Long
    
    Public Declare Function gethostbyname Lib "WSOCK32.DLL" _
       (ByVal szHost As String) As Long
    
    Public Declare Sub RtlMoveMemory Lib "kernel32" _
       (hpvDest As Any, _
        ByVal hpvSource As Long, _
        ByVal cbCopy As Long)
    
    
    Public Function GetStatusCode(status As Long) As String
    
       Dim msg As String
    
       Select Case status
          Case IP_SUCCESS:               msg = "ip success"
          Case IP_BUF_TOO_SMALL:         msg = "ip buf too_small"
          Case IP_DEST_NET_UNREACHABLE:  msg = "ip dest net unreachable"
          Case IP_DEST_HOST_UNREACHABLE: msg = "ip dest host unreachable"
          Case IP_DEST_PROT_UNREACHABLE: msg = "ip dest prot unreachable"
          Case IP_DEST_PORT_UNREACHABLE: msg = "ip dest port unreachable"
          Case IP_NO_RESOURCES:          msg = "ip no resources"
          Case IP_BAD_OPTION:            msg = "ip bad option"
          Case IP_HW_ERROR:              msg = "ip hw_error"
          Case IP_PACKET_TOO_BIG:        msg = "ip packet too_big"
          Case IP_REQ_TIMED_OUT:         msg = "ip req timed out"
          Case IP_BAD_REQ:               msg = "ip bad req"
          Case IP_BAD_ROUTE:             msg = "ip bad route"
          Case IP_TTL_EXPIRED_TRANSIT:   msg = "ip ttl expired transit"
          Case IP_TTL_EXPIRED_REASSEM:   msg = "ip ttl expired reassem"
          Case IP_PARAM_PROBLEM:         msg = "ip param_problem"
          Case IP_SOURCE_QUENCH:         msg = "ip source quench"
          Case IP_OPTION_TOO_BIG:        msg = "ip option too_big"
          Case IP_BAD_DESTINATION:       msg = "ip bad destination"
          Case IP_ADDR_DELETED:          msg = "ip addr deleted"
          Case IP_SPEC_MTU_CHANGE:       msg = "ip spec mtu change"
          Case IP_MTU_CHANGE:            msg = "ip mtu_change"
          Case IP_UNLOAD:                msg = "ip unload"
          Case IP_ADDR_ADDED:            msg = "ip addr added"
          Case IP_GENERAL_FAILURE:       msg = "ip general failure"
          Case IP_PENDING:               msg = "ip pending"
          Case PING_TIMEOUT:             msg = "ping timeout"
          Case Else:                     msg = "unknown  msg returned"
       End Select
    
       GetStatusCode = CStr(status) & "   [ " & msg & " ]"
    
    End Function
    
    
    Public Function HiByte(ByVal wParam As Integer)
    
        HiByte = wParam \ &H100 And &HFF&
    
    End Function
    
    
    Public Function LoByte(ByVal wParam As Integer)
    
        LoByte = wParam And &HFF&
    
    End Function
    
    
    Public Function Ping(szAddress As String, ECHO As ICMP_ECHO_REPLY) As Long
    
       Dim hPort As Long
       Dim dwAddress As Long
       Dim sDataToSend As String
       Dim iOpt As Long
    
       sDataToSend = "Echo This"
       dwAddress = AddressStringToLong(szAddress)
    
       Call SocketsInitialize
       hPort = IcmpCreateFile()
    
       If IcmpSendEcho(hPort, _
                       dwAddress, _
                       sDataToSend, _
                       Len(sDataToSend), _
                       0, _
                       ECHO, _
                       Len(ECHO), _
                       PING_TIMEOUT) Then
    
            'the ping succeeded,
            '.Status will be 0
            '.RoundTripTime is the time in ms for
            '               the ping to complete,
            '.Data is the data returned (NULL terminated)
            '.Address is the Ip address that actually replied
            '.DataSize is the size of the string in .Data
             Ping = ECHO.RoundTripTime
       Else: Ping = ECHO.status * -1
       End If
    
       Call IcmpCloseHandle(hPort)
       Call SocketsCleanup
    
    End Function
    
    
    Function AddressStringToLong(ByVal tmp As String) As Long
    
       Dim i As Integer
       Dim parts(1 To 4) As String
    
       i = 0
    
      'we have to extract each part of the
      '123.456.789.123 string, delimited by
      'a period
       While InStr(tmp, ".") > 0
          i = i + 1
          parts(i) = Mid(tmp, 1, InStr(tmp, ".") - 1)
          tmp = Mid(tmp, InStr(tmp, ".") + 1)
       Wend
    
       i = i + 1
       parts(i) = tmp
    
       If i <> 4 Then
          AddressStringToLong = 0
          Exit Function
       End If
    
      'build the long value out of the
      'hex of the extracted strings
       AddressStringToLong = Val("&H" & Right("00" & Hex(parts(4)), 2) & _
                             Right("00" & Hex(parts(3)), 2) & _
                             Right("00" & Hex(parts(2)), 2) & _
                             Right("00" & Hex(parts(1)), 2))
    
    End Function
    
    
    Public Function SocketsCleanup() As Boolean
    
        Dim X As Long
    
        X = WSACleanup()
    
        If X <> 0 Then
            MsgBox "Windows Sockets error " & Trim$(Str$(X)) & _
                   " occurred in Cleanup.", vbExclamation
            SocketsCleanup = False
        Else
            SocketsCleanup = True
        End If
    
    End Function
    
    
    Public Function SocketsInitialize() As Boolean
    
        Dim WSAD As WSADATA
        Dim X As Integer
        Dim szLoByte As String, szHiByte As String, szBuf As String
    
        X = WSAStartup(WS_VERSION_REQD, WSAD)
    
        If X <> 0 Then
            MsgBox "Windows Sockets for 32 bit Windows " & _
                   "environments is not successfully responding."
            SocketsInitialize = False
            Exit Function
        End If
    
        If LoByte(WSAD.wVersion) < WS_VERSION_MAJOR Or _
           (LoByte(WSAD.wVersion) = WS_VERSION_MAJOR And _
            HiByte(WSAD.wVersion) < WS_VERSION_MINOR) Then
    
            szHiByte = Trim$(Str$(HiByte(WSAD.wVersion)))
            szLoByte = Trim$(Str$(LoByte(WSAD.wVersion)))
            szBuf = "Windows Sockets Version " & szLoByte & "." & szHiByte
            szBuf = szBuf & " is not supported by Windows " & _
                              "Sockets for 32 bit Windows environments."
            MsgBox szBuf, vbExclamation
            SocketsInitialize = False
            Exit Function
    
        End If
    
        If WSAD.wMaxSockets < MIN_SOCKETS_REQD Then
            szBuf = "This application requires a minimum of " & _
                     Trim$(Str$(MIN_SOCKETS_REQD)) & " supported sockets."
            MsgBox szBuf, vbExclamation
            SocketsInitialize = False
            Exit Function
        End If
    
        SocketsInitialize = True
    
    End Function

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  



Click Here to Expand Forum to Full Width