CommonControls (Replacement of the MS common controls)

[Krool]

The old problem with DEMO-project. Krool didn't fixed it. The solution:

https://www.vbforums.com/showthread....=1#post5632609

I changed the FontCombo now to FtcStyleDropDownCombo instead of FtcStyleDropDownList.
However, it would be interesting to know what FontName the RichTextBox has but the FontCombo did not load .. you know what I mean ?

[Nouyana]

I changed the FontCombo now to FtcStyleDropDownCombo instead of FtcStyleDropDownList.
However, it would be interesting to know what FontName the RichTextBox has but the FontCombo did not load .. you know what I mean ?

This is "MS Sans Serif". In my system it named "Microsoft Sans Serif".

wikipedia/Microsoft_Sans_Serif

[Krool]

This is "MS Sans Serif". In my system it named "Microsoft Sans Serif".

wikipedia/Microsoft_Sans_Serif

Yeah, but both are in the FontCombo... So, having FtcStyleDropDownList implies that the RichTextBox has a font which the FontCombo does not have in it's list, thus erroring. FtcStyleDropDownCombo will not error if it's not existing in the list. Can you re-check ?



PS: Both MS Sans Serif and Microsoft Sans Serif are valid and both should exist. MS Sans Serif is a bitmap font and Microsoft Sans Serif is a true-type font.

[Nouyana]

Yeah, but both are in the FontCombo... Can you re-check ?

Not in my FontCombo. WinXP SP3 (edition 2021 from here).

Both MS Sans Serif and Microsoft Sans Serif are valid and both should exist...

Should, but not must. This is a clean WinXP SP2 with MS Office 2002:

[Nouyana]

Yahoo!!! I've found it!

Yes, this is not true-type font, so I've found it in a notepad...

[Krool]

Update released.

Accelerator keys support in a VBA environment.
The same technique as in the VBFlexGrid control (which supports it already a while ago) is now implemented on each control where accelerator keys are applicable. (PreTranslateMsg)

To note is that this is a preparation for a future 1.8 OCX. This will not be implemented in the 1.7 OCX as it would be necessary to delete the .exd files in the VBE and Forms folder.
So, I decided to have it ready then for a fresh 1.8 someday.

[MountainMan]

Krool,

I am using the ListView control. It works great especially in virtual mode. However, I want to change the width of a column and I can't figure out how to do it. In the old ListView control you would use .Controls.item(x).Width = somevalue but your control does not have "Controls" or "Item()". I looked at your code for Get/Set ColumnWidth and you can set or get a Single that is the ColumnWidth but there doesn't seem to be any way to specify which column to use. I know it must be possible and probably easy but I can't figure out how to do it.

[Mith]

Krool,

I am using the ListView control. However, I want to change the width of a column...

use ListView1.ColumnHeaders(1).Width to set the column width.

[MountainMan]

That works. Thanks!

[MountainMan]

Another question: I was surprised a while back that you got LabelW to have hWnd as a property. I didn't think much more about it until this week. When I run the debugger in VB6, I don't get any LabelW controls but I do get a lot of controls that look like and are named as labels but appear as TextBoxes. So it seems to me that you don't use the Label control and what we are calling LabelW's are actually restricted TextBoxes that appear as labels and that is how you can get an hWnd for a label. Is this correct?

[Krool]

Another question: I was surprised a while back that you got LabelW to have hWnd as a property. I didn't think much more about it until this week. When I run the debugger in VB6, I don't get any LabelW controls but I do get a lot of controls that look like and are named as labels but appear as TextBoxes. So it seems to me that you don't use the Label control and what we are calling LabelW's are actually restricted TextBoxes that appear as labels and that is how you can get an hWnd for a label. Is this correct?

I don't understand.
The LabelW is windowless, no hWnd property.
What I added a while back was a new control called WindowedLabel.

[MountainMan]

I'll investigate further.

However, on a related note, I am using your latest VBCCR17.OCX version and it does not include WindowedLabel.

When I run the ComCtlsDemo and look in the form toolbox it is there.

Is there a reason it is not in VBCCR17.OCX or am I doing something wrong?

[Krool]

I'll investigate further.

However, on a related note, I am using your latest VBCCR17.OCX version and it does not include WindowedLabel.

When I run the ComCtlsDemo and look in the form toolbox it is there.

Is there a reason it is not in VBCCR17.OCX or am I doing something wrong?

I accumulate a certain set of new features until I release VBCCR18.
I can't update VBCCR17 as I did some breaking changes, RichTextBox and OLE props/events.

[Semke]

can the limit to the contents of the RichTextBox. be increased to more than 65536

[VanGoghGaming]

You can send the "EM_EXLIMITTEXT" message to increase the characters limit:

Private Const EM_EXLIMITTEXT As Long = &H435, lMaxLimit As Long = &H7FFFFFFF

SendMessage RichTextBox.hWnd, EM_EXLIMITTEXT, 0&, lMaxLimit

[Mith]

can the limit to the contents of the RichTextBox. be increased to more than 65536

What limit? I tried the code below and get a text length of 70.000:

rtfLog.Text = String(70000, "a")
Debug.Print rtfLog.textLength

[Semke]

What limit? I tried the code below and get a text length of 70.000:

rtfLog.Text = String(70000, "a")
Debug.Print rtfLog.textLength

this is true, but when I type I am limited to 65536, and when I paste only the first 65536 characters are pasted.

[Semke]

You can send the "EM_EXLIMITTEXT" message to increase the characters limit:

Private Const EM_EXLIMITTEXT As Long = &H435, lMaxLimit As Long = &H7FFFFFFF

SendMessage RichTextBox.hWnd, EM_EXLIMITTEXT, 0&, lMaxLimit

thank you
This gives me 1697420, I need more, much more

[Elroy]

can the limit to the contents of the RichTextBox. be increased to more than 65536

When I'm in this situation, and I've been there, I typically turn to the Scintilla OCX control. That thing will do just about anything you want to throw at it (within the limits of what a 32-bit program can do).

Also, it feels like we're spamming this codebank thread. I'm not sure why this isn't in the typical Q&A section.

[Krool]

Update released.

Included the Resize event in the FrameW control. (like the VB.Picture control)
A control container should have such event to re-arrange it's contained controls.
However, the VB.Frame control does not have it.

[logley]

If I use SendMessageW(combo,CB_ADDSTRING,0,1) to add contents to a combo, when I click on the combo it only opens up with one item, as opposed to showing 10 items.

Any help appecirated

[Mith]

If I use SendMessageW(combo,CB_ADDSTRING,0,1) to add contents to a combo, when I click on the combo it only opens up with one item, as opposed to showing 10 items.

Any help appecirated

combo.hWndList ?

[logley]

combo.hWndList ?

I got around it by doing the following :

    For iSockets = 0 To 9999
        If iSockets < 10 Then
            cmbSockets.AddItem iSockets
            cmbSockets.ItemData(cmbSockets.NewIndex) = iSockets
        Else
            lngAddIndex = SendMessageW(cmbSockets.hWnd, CB_ADDSTRING, 0, StrPtr(iSockets))
            SendMessageW cmbSockets.hWnd, CB_SETITEMDATA, lngAddIndex, ByVal iSockets
        End If
    Next iSockets
    cmbSockets.ListIndex = 0

Even though the Combo supports the .Redraw method, whilst doing tests, I still find using SendMessage a quicker way to add large amounts to combos.

Lee.

[sdowney1]

I changed the FontCombo now to FtcStyleDropDownCombo instead of FtcStyleDropDownList.
However, it would be interesting to know what FontName the RichTextBox has but the FontCombo did not load .. you know what I mean ?

I am trying a test of the richtextbox control to see if I can paste in some chinese text.
I created a new project and put a reference to oleguids.tlb, that file located in the project folder but none of the new controls are there.

I also tried regserv32 that file in the syswow64 folder but it gave me error.

I am running windows 11 PRO

What do I need to do?

Whatever I am doing is not working

[Krool]

I am trying a test of the richtextbox control to see if I can paste in some chinese text.
I created a new project and put a reference to oleguids.tlb, that file located in the project folder but none of the new controls are there.

I also tried regserv32 that file in the syswow64 folder but it gave me error.

I am running windows 11 PRO

What do I need to do?

Whatever I am doing is not working

You don't need to register it via regsvr32.
Just reference it in vb6 via references -> browse file.

[Krool]

Update released.

Included the AutoVerbMenu in the RichTextBox control.

[Krool]

Update released.

Included the AutoVerbMenu in the RichTextBox control.

Should we have this menu localized ? (Via GetUserDefaultUILanguage)

[jpfa]

The MS RTB does localize it, so why not, for compatibility? The .NET version also allows the user to replace it with a custom one optionally calling the functions provided by the items of the default one. I did that 2 times already.

[Krool]

The MS RTB does localize it, so why not, for compatibility? The .NET version also allows the user to replace it with a custom one optionally calling the functions provided by the items of the default one. I did that 2 times already.

I guess the richtx32.ocx does not localize it .. or am I wrong ?

2000 MENU
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
  POPUP "Context"
  {
    MENUITEM "&Undo\tCtrl+Z",  2104
    MENUITEM SEPARATOR
    MENUITEM "Cu&t\tCtrl+X",  2100
    MENUITEM "&Copy\tCtrl+C",  2101
    MENUITEM "&Paste\tCtrl+V",  2102
    MENUITEM "&Delete\tDel",  2103
    MENUITEM SEPARATOR
    MENUITEM "&Object",  2110
  }
}

[sdowney1]

You don't need to register it via regsvr32.
Just reference it in vb6 via references -> browse file.

Hi, after you reference it then what do you do?
I do see it in the references and have it checked.
I do not see any new controls showing in the toolbox on the left.

I see in your example user controls showing up on the right in the IDE.
Must be something left for me to do to use them
I am used to toolbox controls.
Thanks for any help.

in an inspiration moment I found this
https://www.vbforums.com/showthread....mmon-controls)
downloaded. put it in the vb6 IDE, then compiled as an OCX control.

Is this what gets referenced in the vb6 ide?

[sdowney1]

I get a name conflicts error
How to get beyond that?

someone said they had something twice in their vbp file, so here is mine, dont see anythng twice

Type=Exe
Reference=*\G{00000300-0000-0010-8000-00AA006D2EA4}#2.5#0#..\Program Files (x86)\Common Files\System\ado\msador15.dll#Microsoft ActiveX Data Objects Recordset 2.5 Library
Object={EAB22AC0-30C1-11CF-A7EB-0000C05BAE0B}#1.1#0; ieframe.dll
Reference=*\G{420B2830-E718-11CF-893D-00A0C9054228}#1.0#0#..\Windows\SysWOW64\scrrun.dll#Microsoft Scripting Runtime
Reference=*\G{00020430-0000-0000-C000-000000000046}#2.0#0#..\Windows\SysWOW64\stdole2.tlb#OLE Automation
Reference=*\G{7C0FFAB0-CD84-11D0-949A-00A0C91110ED}#1.0#0#..\Windows\SysWOW64\msdatsrc.tlb#Microsoft Data Source Interfaces
Reference=*\G{56BF9020-7A2F-11D0-9482-00A0C91110ED}#1.0#0#..\WINDOWS\SysWow64\MSBind.dll#Microsoft Data Binding Collection
Reference=*\G{8620B873-D801-11D2-AC47-00600832A1F6}#2.1#0#..\WINDOWS\SysWow64\VBPrnDlg.dll#Microsoft VB Printer Dialog(PSS)
Reference=*\G{2A75196C-D9EB-4129-B803-931327F72D5C}#2.8#0#..\Program Files (x86)\Common Files\System\ado\msado28.tlb#Microsoft ActiveX Data Objects 2.8 Library
Object={831FDD16-0C5C-11D2-A9FC-0000F8754DA1}#2.2#0; mscomctl.OCX
Object={86CF1D34-0C5F-11D2-A9FC-0000F8754DA1}#2.0#0; mscomct2.ocx
Object={3B7C8863-D78F-101B-B9B5-04021C009402}#1.2#0; richtx32.Ocx
Object={648A5603-2C6E-101B-82B6-000000000014}#1.1#0; MSComm32.Ocx
Object={F9043C88-F6F2-101A-A3C9-08002B2F49FB}#1.2#0; ComDlg32.OCX
Object={BDC217C8-ED16-11CD-956C-0000C04E4C0A}#1.1#0; TabCtl32.Ocx
Form=frmSearch.frm
Form=frmLogon.frm
Form=frmMaintain.frm
Form=frmData.frm
Form=frmMarcIn.frm
Form=frmMarcOut.frm
Form=frmPatron.frm
Form=frmPatronDelete.frm
Form=frmPatronSearch.frm
Form=frmCheckout.frm
Form=frmOverDue.frm
Form=frmAbout.frm
Form=frmMarcSearch.frm
Class=clsElasticForms; clsElasticForms.cls
Module=Module2; Choosecolor.bas
Form=frmMarcChoices.frm
Form=MDIMarc.frm
Form=frmFind.frm
Form=frmMarcBrkr.frm
Form=frmHelpBrkr.frm
Module=Module1; LogonPrivelege.bas
Form=frmDisplay.frm
Form=frmChoicesHelp.frm
Form=frmadder.frm
Form=frmRepair.frm
Module=Module5; Slidder1.bas
Module=Module3; MarcUpdate.bas
Module=Module6; PublicFunction.bas
Form=frmCirc.frm
Module=Module7; CircRecorder.bas
Module=Module8; MarcBrkr.bas
Module=Module9; SQLCreatedatabase.bas
Module=Module11; MSDEcreateDatabase.bas
Form=frmOpener.frm
Form=frmSortSdls.frm
Form=frmMarcExporter.frm
Form=frmMarcTagExport.frm
Form=frmMSDEConnect.frm
Form=frmPrintSpline.frm
Form=frmPrintBarcodes.frm
Form=frmPrintRecord.frm
Class=RegAccess; Regacces.cls
Form=frmMSDEmaster.frm
Form=frmGlobalsettings.frm
Form=frmPatronLimit.frm
Form=frmPrintPRecord.frm
Form=frmPrintPBarcode.frm
Form=frmPrintPLabels.frm
Form=frmFailure.frm
Form=frmStoredQuery.frm
Form=frmINternet.frm
Class=clsFormResizer; clsFormResizer.cls
Form=frmDewey2.frm
Form=frmFindRecord.frm
Form=frmCheckAdjust.frm
Form=frmDatabaseSelect.frm
Form=frmSearchfirst.frm
Form=frmLOCsearch2.frm
Module=Module10; Util.bas
Form=frmNag.frm
Form=frmList.frm
Form=frmRepairMysql.frm
Form=frmDisplayMessage.frm
Form=frmTagSort.frm
Form=frmInsert008.frm
Form=frmInsert007.frm
Form=frmAlterMysql.frm
Class=UndoElement; UndoElement.cls
Module=MyHyperlink; MyHyperlink.bas
Module=Module4; Module4.bas
Form=frmLists.frm
Form=frmListsInput.frm
Module=Module12; marcwriter2.bas
Form=frmCHistory.frm
Module=Module13; showfont.bas
Form=frmWaitNotice.frm
Form=frmDisplayMessage2.frm
Form=frmDelete.frm
Module=PublicVars; PublicVars.bas
IconForm="frmData"
Startup="frmLogon"
HelpFile=""
Title="BookStore"
ExeName32="BookStore.exe"
Command32=""
Name="BookStore"
HelpContextID="0"
CompatibleMode="0"
MajorVer=2
MinorVer=3
RevisionVer=1
AutoIncrementVer=0
ServerSupportFiles=0
VersionCompanyName="Hampton Christian Schools"
CompilationType=0
OptimizationType=0
FavorPentiumPro(tm)=0
CodeViewDebugInfo=0
NoAliasing=0
BoundsCheck=0
OverflowCheck=0
FlPointCheck=0
FDIVCheck=0
UnroundedFP=0
StartMode=0
Unattended=0
Retained=0
ThreadPerObject=0
MaxNumberOfThreads=1
DebugStartupOption=0

[MS Transaction Server]
AutoRefresh=1

[RVB]
DeleteClass1=Module13
DeleteClass2=Module13
DeleteClass3=frmTranslate
DeleteClass4=frmStoredQuery2
DeleteClass5=frmStoredQuery2
DeleteClass6=Module10

[sdowney1]

Well could it be the MS common control reference must first be removed to add in this new one?
I don't actually know what I am talking about here, as I don't see that kind of reference in the list.

I think doing that all the forms current controls will be gone.
Do you have to redesign all the forms again with the new controls?
Or is there another way to do this?

I can try it on a program backup to see what happens. I have a lot forms and a lot of controls on them.
Too bad MS cared nothing about Unicode at the time they created vb6 controls, that was a serious flaw in vb6.

EDIT here

I may be on to something.
I removed reference to OLE Automation, vb6 IDE let me remove it.
Then program would not run, so it needs that. Left it out.
Then I went to components and added the new unicode controls OCX, vb6 IDE accepted them.
Then went back to references, added OLE Automation back in
It took it in the vb6 IDE. And the new controls appear on the left side tool box list.

Program runs

?? Anyone know why it does this?

I found out OLE Automation had to be not in the references by creating a new EXE project.
Without it, I was able to add the unicode components.

So am I doing it correctly now?

[sdowney1]

These Unicode aware controls as Great!
Setup a little test using right click paste and sendmessage to paste into box chinese text, it works good
Example is very simple here, 2 rtb, one is MS, one is Krool's.
All i did was after compiling the OCX referenced it using components manage in the vb6 IDE

chinese text keyboard is here https://www.branah.com/chinese

also seeing if I can send a sample code of the project here

[sdowney1]

I found an issue when mixing the Krool RTB control and the MS RTB control on the same form.

Has to do with a function to enable URL detection which I have used for decades. it lights up a url in blue showing it as a hyperlink.

It seems to work ok if all the RTB are MS or all the RTB are Krool
But here I have 2 krool RTB, then 1 MS RTB, and the function dies and complains about type mismatch 13
I have 2 versions of functions to detect url and both do the same failure. And then nothing you can do except delete the failing RTB control, it will never work again.

for this example, the first 2 lines execute fine, hits number 3 and it dies with the error.

MyDetectURL rtxtMarckrool1, True, rtxtMarckrool1
MyDetectURL rtxtMarckrool2, True, rtxtMarckrool2

MyDetectURL RichTextBoxMS, True, RichTextBoxMS
EnableAutoURLDetection RichTextBoxMS

If you can look into it, just run it, dont run with full compile as it is incomplete.
I was messing with deleting RTB and putting new one on same form with different names but I see no discernable failure pattern.
Something happens with the RTB control, either MS or Krool when mixed together on a form and the
MyDetectURL and EnableAutoURLDetection function hates it.

[VanGoghGaming]

Something happens with the RTB control, either MS or Krool when mixed together on a form and the
MyDetectURL and EnableAutoURLDetection function hates it.

Krool RTB is sentient and when it detects MS RTB it wants to assimilate it, resistance is futile...

[sdowney1]

Krool RTB is sentient and when it detects MS RTB it wants to assimilate it, resistance is futile...

Yeah, I don't doubt it a bit.