Printable View
Greetings...
I am making a new type of single programming language that is to be given to Microsoft for nothing and no kind of payment, as such and the like. However I will then take not any amount of the sales, etc. I am doing this app for the good of them, etc...
PS: Please look further into the Thread, cause that is where the newly updated Project ZIP Will be...
What happened to the language and IDE you were making earlier?!
This is only a fraction of what that is. Also it's got the commands, embedded into the AcitveX Control Object. Also that accompanies the QuickDirector COM.NET# IDE, as well. Much like the Microsoft Scripting Control does. Also I hear that they are working on a newer Visual Basic, however it will then be upgraded, much the same so that it gets a new lease on life, as such and the like...
Right...
However it is totally much more simpler to upgrade an ActiveX Control Object, instead of whole EXE, files. Therefore I was able to have the IDE, subjected to being grouped, of Source Code and also Control Data, as well. Then all I must do was to only upgrade the Controls, and then Compile the new EXE, with them included...
PS: Is there a way to upgrade a ActiveX Control Object, instead of placeing the Control again, and then recompiling the EXE file. I find that totally impossible, to do when there are so many of that Control, on my IDE. Eg: There is each Control for a Form, or something like a Dim Process, which is there is only one of those. But they in total as eight RichCodeBoxes and also then there is the two of them in Control Arrays, for the Form and also the UserControl, as well. I am not quite sure on making a separate one for Class Modules and also Modules. Seeing that the Project Files, are totally embedded into each other, and therefore there is only one Project Files, for each Project...
-- Could I tempt you into Beta Testing my ActiveX Control Object or if you haven't already???
Links to executables are not permitted on the forum. You could post the source code instead.
So sorry, about that someone could have told me that instead, of making a fool of myself...
I will work on a Source Code Project File Zip, right away...
Aren't there enough programming languages already?
What does your new language hope to do, that others can't?
Totally minimise Source Code input. Also maxmising output. A Single App for Microsoft, that has a very small MSDN Library. And to the fact that it is totally a very small app, itself as well. I mean that the whole MSDN Library, that I have been able to write just so far, is only about 200kb in disk space size!! However you would be required to read and the build the Project that I have placed on this Thread, so that you could be able to use it to the extent of Beta Testing it for me. Then could you if you liked or disliked the Product, could you please post on this Thread. But no bulling, etc: Please???
Does it allow me to write code just by thinking of it?
Could it create a pizza for me using 3D printing?
I can already see a lot of potential for your new programming language.
Have you named it yet?
.
Does anyone else feel like they're reading posts from google translate..
The project you posted is in VB6. I don't have ready access to a VB6 IDE, so I won't be able to do much with it.
Well you could be able to translate or rather more over translate the ActiveX Control Object to be either foward compatiable with either .NET and #, as well as Object Pascal and Visual Fortran, at that and even as I have heard that it can also run with the Cobol IDE, as well and then they will be able to only work on the second execute of the ActiveX Control Object. Becuase that is what happens to all of my Controls, they need to be Debugged properly, to find out what the hell is going on here. That shouldn't be happening, but it is happening and then after that second execute and then it will then work for as long as you don't upgrade the ActiveX Control Object, at that...
-- Whom do you think that is translating who, I am not quite sure what you mean by that remark???Quote:
Originally Posted by dsheller
-- You have to look deeper into the Thread to download the newer version of the Product. Thankyou for your time and effort...
This topic always reminds me of that old song The Sound of Worms.
??? :(+< ???
These are the following programming languages that my Product works on:
1. C++/J++/Visual Basic COM
2. C++/J++/Visual Basic .NET
3. C#/J#
4. Visual Fortran
5. Object Pascal
6. Cobol
7. Director and Lingo
8. QBASIC version unknown
9. XHTML/PHP, etc...
-- Newer version of the QuickDirector Express product, exists on this thread!!
Please look further into this Thread, cause there has been Project updates to the project that has been stated in the OP, enjoy!!
PS: Please don't bash and hurt the project, by your actions on this thread???
I'm asorry but I have absolutely no idea what your project is meant to be. I don't have a VB6 ide these days so can't actually open it to find out and your descriptions here are vague.
You've called it a single programming language which makes sense (though I'm not really sure what you mean by "single") but you then go on to talk about it being an Active X control which makes no sense in this context).
At times you've referred to it as an app but a language isn't an app, it's something you use to make apps.
You've given us a list of languages that your language works on, but that doesn't make sense either. Languages don't "work on" other languages, unless you mean it can produce those languages but then it's not doing much other than translating.
Also, and I mean this in the kindest possible way, your English is not good. If you're not a native English speaker then that's understandable. I thought it was worth saying, though, because it, more than anything else, will get stop you getting taken seriously in this thread.
P.S. Is it any good for creating AIs. Maybe you and Moti could team up.
Well I went after some changes in the Source Code and then made it a Form, instead. Which can then be loaded into any kind of VB IDE, using either COM, .NET or even #. Also I'm working on a AI type of Console that writes AI Script and other things like that. I can also draw graphics using the older type of pen like "LOGO" type of design and also it can also display graphics, much the same way that VB does, but through a Resource Library that is called using the .Member property, which is only a Long variable that has a reference to the CastMember inside the Resource Library, of the current app that the programmer is writing...
I tried reading through all this and I STILL don't have a clue as to what this is all about. So... 1) Can it make me a cup of coffee (we'll get to a good cup later, right now, I just want to make coffee) and 2) Does it run on Sandpaper? That's very important to some of us around here.
-tg
??? What ???
Quite.Quote:
Originally Posted by ThEiMp
Have you considered Web Form enabling the back end dynamics? This would have the additional advantage of allowing the transient user to overload the thruster stacks and while still keeping the sasquatch footprint small. Alternatively you could go for a virtulised overhead touchscreen interface to allow the waterfall design of sub-dermal occular functions.Quote:
Well I went after some changes in the Source Code and then made it a Form, instead. Which can then be loaded into any kind of VB IDE, using either COM, .NET or even #. Also I'm working on a AI type of Console that writes AI Script and other things like that. I can also draw graphics using the older type of pen like "LOGO" type of design and also it can also display graphics, much the same way that VB does, but through a Resource Library that is called using the .Member property, which is only a Long variable that has a reference to the CastMember inside the Resource Library, of the current app that the programmer is writing...
...And if that made no sense to you at all, you now know how the rest of us feel.
Ĉu vi parolas Esperanton?
Can you please add PHP and White SpaceQuote:
Originally Posted by ThEiMp
Apparently, it means single as in not married, since it is clearly meant to mate up with some other language.Quote:
Originally Posted by FunkyDexter
So THAT's how you hit a wombat at 200 meters....Quote:
Originally Posted by FunkyDexter
-tg
I believe the line was WompRAT...unless you aren't quoting Luke Skywalker.
Yes, trying to but the workload is still growing. I have lots to do on it, and other things, as well...Quote:
Originally Posted by visualAd
Sounded more like Luke Walkabout to me.Quote:
Originally Posted by Shaggy Hiker
-- Can we get back to the OP, in which I am trying to work towards???
Apparently, it doesn't work on English.
-- What the mindless chatter we're doing, or the Project???
-- Please look further into the Thread, cause there is the newer updated version of the Product that me, the OP has placed on this Thread...
Programmer Alert: If you are having problems trying to access the Project on the COM IDE. You must do the following. Convert the Resources to your Country's try of ASCII Code, and then try saving it, then make a Build of the Project using the Make EXE File, then work from the Build and then not from the Project Data Files. Please you must do this when working with my Projects, because I am using English, Australian and then you cannot work with anything else and then I can therefore not work with anything else than that, like wise!! So far I haven't been told about anything about the .NET and then the #, type of IDE programming languages. But then I cannot tell what kind of one you are using...
PS: Also remove the older ones from your system, always use the most upto date version of all software. Also you must be using the Visual Basic 6.00 Enterprise Edition SP6.5, to work with the Project Data Files...
Go here to download the recent Visual Basic 6.00 SP6 Updates: Click Here...
Please look further into the Thread, because there is an updated version of the Product that I am posting in this very Thread...
Not really... because none of us have a clue what you're talking about. What is it? In plain English.Quote:
Can we get back to the OP, in which I am trying to work towards???
It looks like you're making an ActiveX control. Are you trying to pass it off as a new language?
Everyone reading this thread is puzzled.
In case you're competing with the AI thread, you're far from getting there.
moti's a seasoned troll and you've nothing on him.
There aren't too many threads that require me to take an asprin after reading, but this was sure one of them...
--That makes two or more of us...
However it was an ActiveX Control but then I just rewrote to a Form, instead and then working from there. Also I wrote it into my IDE, and then working as an Express and Ultimate Editions of it, at the same time. Is this really neccessary, to do or not???
Actually why not download following the link in my signature: "QuickDirector Express" in the section under: "QuickDirector Stuff"...
404 page not foundQuote:
Originally Posted by ThEiMp
-- Thanks for the Input$, I am going to check it out right about now!!
The Link is now Refreshed, Relinked and then it works right about now, in deed. That was a few very intense moments, working out what was wrong. I had a space in the link feeder on the Forum Signature!! I didn't realise that, part of the fact...
I hate it when that happens! So stressful!Quote:
Originally Posted by ThEiMp
-- hehe := Same here ,, at least my machine didn't blow up this time. Only joking...
Posting in an epic thread :bigyello:
-- hehe ,, yes it really is, isn't it???
Oh yeah !
-- So right about now. Getting back to the OP...
Has anyone been able to download my products and if they work, please tell me if they do so. If they don't work, please tell me and then I will then be able to get on to it right, at some point in time...
Well seeing that this is inside the General ChitChat Forum, I am going to ask: Does anyone Like or Dislike my Member Signature on this Forum??? I have been able to remove all of the Compiled Coded Internet Links, therefore it is now totally safe for people to use also there is a compiled section of the Webpage. But then I cannot let loose all of my Source Code, then. But that is my way of thinking, anyway...
I tried going to your main page which worked but doesn't contain anything useful except the links at the top. Unfortunately, every link returns a 404 page not found error so there's not much to look at at the moment.
Dangit! What's with polls lately??? why must ti be one way or the other? where's the apathy option? What if I neither like nor dislike it?? Ugh... you polsters are all alike. Bah!Quote:
Originally Posted by ThEiMp
-tg
Quote:
Originally Posted by FunkyDexter
(though I'm not really sure what you mean by "single")
That should be added to webster's dictionary. :DQuote:
Originally Posted by Shaggy Hiker
I'm working on the Webpage, right now even...Quote:
Originally Posted by FunkyDexter