winsock smtp emailer working, but not quite right

Hey all.
I'm using a code I found on this site to send email.
The email is coming from one of my website domain emails and going to the same email.
I'm using Outlook to confirm receipt of the emails.
Everything is working except that the body of the message is not coming through.

I'm using Winsock and the commands look like:

Winsock1.SendData "Date: " & Format(Date, " dd mmm yy ") & Time & vbCrLf
'To:
Winsock1.SendData "TO:<" & mvarRecipient & ">" & vbCrLf
'From:
Winsock1.SendData "From: <" & mvarSender & ">" & vbCrLf
'Subject:
If Not mvarSubject = "" ThenWinsock1.SendData "Subject:" & mvarSubject & vbCrLf
'Body
Winsock1.SendData "Body Line 1." & vbCrLf
Winsock.SendData "Body Line 2." & vbCrLf
Winsock1.SendData "." & vbCrLf
Winsock1.SendData "QUIT"
Winsock1.Close

The emails are going through, the information is all correct, but the body part is not coming out in the body part of Outlook. It is blank.

Any ideas?

Have a look at this great project.

Quote:

---

Originally Posted by wengang

Hey all.
I'm using a code I found on this site to send email.
The email is coming from one of my website domain emails and going to the same email.
I'm using Outlook to confirm receipt of the emails.
Everything is working except that the body of the message is not coming through.

I'm using Winsock and the commands look like:

Winsock1.SendData "Date: " & Format(Date, " dd mmm yy ") & Time & vbCrLf
'To:
Winsock1.SendData "TO:<" & mvarRecipient & ">" & vbCrLf
'From:
Winsock1.SendData "From: <" & mvarSender & ">" & vbCrLf
'Subject:
If Not mvarSubject = "" ThenWinsock1.SendData "Subject:" & mvarSubject & vbCrLf
'Body
Winsock1.SendData "Body Line 1." & vbCrLf
Winsock.SendData "Body Line 2." & vbCrLf
Winsock1.SendData "." & vbCrLf
Winsock1.SendData "QUIT"
Winsock1.Close
The emails are going through, the information is all correct, but the body part is not coming out in the body part of Outlook. It is blank.

Any ideas?

---

Not a good idea. You are closing the socket immediately after you send data. You need to give it time to be sent before you close the socket.

You might try this:

Code:

---

Private Sub SomeSub()
 Dim EmailMessage As String'
 
 EmailMessage = "Date: " & Format(Date, " dd mmm yy ") & Time & vbCrLf 
 EmailMessage = EmailMessage & "TO:<" & mvarRecipient & ">" & vbCrLf   
 EmailMessage = EmailMessage & "From: <" & mvarSender & ">" & vbCrLf     
 
 If Not mvarSubject = "" Then EmailMessage = EmailMessage & "Subject:" & mvarSubject & vbCrLf

 EmailMessage = EmailMessage & "Body Line 1." & vbCrLf
 EmailMessage = EmailMessage & "Body Line 2." & vbCrLf & "." & vbCrLf
 EmailMessage = EmailMessage & "QUIT"

 Winsock1.SendData EmailMessage & vbCrLf
End Sub

Private Winsock1_Close()
 Winsock1.Close
End Sub

---

You don't have to close the connection, the Server will close it. Just code the Winsock_Close event to close.

Code:

---

Private Sub Winsock1_Close()
Winsock1.Close
End Sub

---

BTW you need to send vbCrLf & "." & vbCrLf at the end of the Body of the message.

BTW you need to send "." & vbCrLf & vbCrLf at the end of the Body of the message.

EmailMessage = EmailMessage & "Body Line 1." & vbCrLf
EmailMessage = EmailMessage & "Body Line 2." & vbCrLf & vbCrLf

Isn't this what you're refering to?

Thanks, I just edited my BTW - according to the SMTP protocol the Body is terminated by vbCrLf & "." & vbCrLf
(ie a "." on a line by itself.)

Quote:

---

Originally Posted by Doogle

You don't have to close the connection, the Server will close it. Just code the Winsock_Close event to close.

---

Private Winsock1_SendComplete()
Winsock1.Close
End Sub

Oops!, I meant _Close().

Thanks, Doogle, for pointing that out.

Quote:

---

Originally Posted by Doogle

Thanks, I just edited my BTW - according to the SMTP protocol the Body is terminated by vbCrLf & "." & vbCrLf
(ie a "." on a line by itself.)

---

Yep. you caught another one. Good going.

Code:

---

  '
  '
 EmailMessage = EmailMessage & "Body Line 2." & vbCrLf & "." & vbCrLf
 EmailMessage = EmailMessage & "QUIT"

 Winsock1.SendData EmailMessage & vbCrLf
  '
  '

---

Actually, the best way to do Email using Winsock is to use the DataArrival event so you can respond correctly to the server's responses.

Here is what I use but you may have to change it to fit your situation as my email server requires login authentication.

Code:

---

Private Sub sckSMTP_DataArrival(ByVal bytesTotal As Long)
 Dim s As String
 Dim ReturnCode As String

 Static SessionCounter As Integer
 
 sckSMTP.GetData s, vbString

 ReturnCode = Left(s,3)
 
 SessionCounter = SessionCounter + 1
 
 Select Case SessionCounter
  Case 1
    If ReturnCode = "220" Then
      sckSMTP.SendData "EHLO" & vbCrLf
    Else
      EmailError 1, s
    End If

  Case 2
    If ReturnCode = "250" Then
      sckSMTP.SendData "AUTH LOGIN" & vbCrLf
    Else
      EmailError 2, s
    End If

  Case 3
    '
    ' Server sends "VXNlcm5hbWU6" which is "Username:" in Base64
    '
    If ReturnCode = "334" Then
      sckSMTP.SendData "cm.........bnM=" & vbCrLf ' Send Username in Base64
    Else
      EmailError 3, s
    End If
   
  Case 4
    '
    ' Server sends "UGFzc3dvcmQ6" which is "Password:" in Base64
    '
    If ReturnCode = "334" Then
      sckSMTP.SendData "cH.....Mw==" & vbCrLf ' Send Password in Base64
    Else
      EmailError 4, s
    End If
 
  Case 5
    If ReturnCode = "235" Then
      sckSMTP.SendData "MAIL FROM: " & cboFrom.Text & vbCrLf
    Else
      EmailError 5, s
    End If
 
  Case 6
    If ReturnCode = "250" Then
      sckSMTP.SendData "RCPT TO: " & cboTo.Text & vbCrLf
    Else
      EmailError 6, s
    End If
 
  Case 7
    If ReturnCode = "250" Then
      sckSMTP.SendData "DATA" & vbCrLf
    Else
      EmailError 7, s
    End If
   
  Case 8
    If ReturnCode = "354" Then
      Dim DatePart As String
      Dim FromPart As String
      Dim SubjectPart As String
      Dim ToPart As String
      Dim Message As String
   
      DatePart = "Date: " & Format(Now, "ddd, dd mmm yyyy hh:mm:ss") & " -0700 (PDT)" & vbCrLf
      FromPart = "From: " & cboFrom.Text & vbCrLf
      SubjectPart = "Subject: " & txtSubject & vbCrLf
      ToPart = "To: " & cboTo.Text & vbCrLf
      Message = txtMessage.Text & vbCrLf
   
      sckSMTP.SendData DatePart & FromPart & SubjectPart & ToPart & Message & "." & vbCrLf   
      Else
        EmailError 8, s
      End If
   
  Case 9
    If ReturnCode = "250" Then
      sckSMTP.SendData "QUIT" & vbCrLf
    Else
      EmailError 9, s
    End If
   
  Case 10
    If ReturnCode = "221" Then
      Exit Sub
    Else
      EmailError 10, s
    End If
 End Select
End Sub

Private Sub sckSMTP_Close()
 sckSMTP.Close
End Sub

Private Sub EmailError(StepNumber, ServerResponse As String)
 '
 ' Do what you need to do
 '
End Sub

---

OK.
THe body of the email is showing up.
So that is working.

The only problem I'm stuck with is that I can only send an email to my own server.
i.e. I can send from [email protected] to [email protected] using host mail.ggg.com
and port 2525

But I can't get it to send email to yahoo, for example.

I don't quite get the part about authentication. I am only sending email out and I won't have any kind of authentication info on the email recipient. Of course I can use my own Yahoo address for testing, but so far, that throws out error 550 (user is not known on this server).

I'm getting a little confused here.

Exactly from where are you using your email application? From your home or office?

What do you mean your own server? Is this your email server?

I don't think Yahoo or any public mail system uses SMTP. Maybe that's why you can't do it. Give me a valid yahoo email so I can test with it.

I think the problem is mine. I'm probably misusing terminology.

I own a website, suppose it is www.ggg.com
I have set up email addresses on this website's email hosting:
[email protected] [email protected], etc

I can use mail.ggg.com as the server in this SMTP email code, and I can send email from [email protected] to [email protected],
but I can't send an email to my yahoo email.

That address is [email protected]

It already gets a lot of spam, so no harm showing it here.

Am I using the wrong code for that?
The point is, whichever code I use, I need to be able to send email to any address I put in.

I can use my website's email host as the SMTP host, and I can use my website email address for the From address, and now the system is working, and the mails are being sent when I send email to my own website email address.

But when I try to send email to Yahoo, I get error 550 from winsock.

OK, let me know if you get anything like test in the yahoo email

nothing so far.
does it take a while?

I just got one "Another Test"

OK, I'm still testing to see how I did it

in that case, let me update you.
I think I got all the messages:

1st one was no subject, "Test"
2nd one was "TEst", "ANother Test"
3rd one was "Here's ANother", "Post if you get this one with subject"
4th one was "test one", "This is Test one"
5th one was "test two", "This is Test two"

OK, "test one" came from my website. "test two" came from my Winsock program just like the one I posted on this thread. The others I'm not sure but probably from the Winsock program.

I did see that. It's just that it had its own .dll and I didn't know if that was something you wrote or just something written anonymously, so I didn't pursue it.
Did you write this app, or do you know who did?

I tried to run this app, and I got the same error 550: no such user here
that happens when I put [email protected] in the recipient email line

and it works when I put my own website's email address in there.

So it's the same result as the othe SMTP sample I've been using.

Quote:

---

Originally Posted by wengang

I did see that. It's just that it had its own .dll and I didn't know if that was something you wrote or just something written anonymously, so I didn't pursue it.
Did you write this app, or do you know who did?

---

If you are refering to the zip or the posted code? Neither one has a dll associated with it as far as I know.

Yes, I wrote the SMTP program.

Use your program and the one I posted (zip or code in thread) and send me two emails. Number them and say which you are using:

[email protected]

I tried to run this app, and I got the same error 550: no such user here
that happens when I put [email protected] in the recipient email line

Then how can it be explained that I was able to send email using the same Winsock program that I posted here.

550 "No such user here"
in both programs

Oh.
I got mixed up.
I followed a link to a zip from RhinoBull at the top of this thread. It uses vbSendMail.dll
That gives me 550.

I haven't seen your app here.

I haven't seen your app here.

Post #9 and the zip is in your other thread.

So, now that 550 taken care of does it work?

I just sent you both an e-mail using the code from the Codebank (http://www.vbforums.com/showthread.p...highlight=smtp) without a problem.

JMS
I just tried your app and it gives the message "message sent" but then immediately followed with another msgbox "Error: Number = 10053, REason = Connection is aborted due to timeout or other failure.

I put in my website's email host and 2525 as the port. Those have been working with the other codes I've tried.

Doogle
That code works for me too, but it's the same problem.
When I try to send to my yahoo address, it gives me error 550 on winsock

JMS, in case I wasn't clear, the email never went through, but I do get "message sent"

Quote:

---

Originally Posted by wengang

Doogle
That code works for me too, but it's the same problem.
When I try to send to my yahoo address, it gives me error 550 on winsock

---

I assume you got the message I sent (?) If so, then your problem lies with your SMTP server not with your Winsock Client.

Doogle
yes, that was one of the first ones I tried.

I'm not sure what SMTP means.
I do know that I can send email via ASP code on my website using CDONTS, and it sends to any email address.
I'm just trying to have that same capability in VB (without using a Webbrowser, etc)
What might the problem with the server be?

also, when I use outlook, I can send to Yahoo mail from my website's email host address

I'm not sure, but are you using a Sender e-mail address that's recognised by the server ?

ie if you connect to an SMTP Server: 'server.isp.com' does your 'Sender' field end with '.isp.com' ?

I'm not sure what SMTP means.

Simple Mail Transfer Protocol

The most common email protocol in use.


Did you use the application from the zip file or the code posted on this thread?

The code that I used to send email to your Yahoo account is the same code I put in a zip file on your other thread.

So, if I was able to do it and if you used that same application (except you will have to use your own SMTP email server) then like Doogle said its your server that is not allowing it or understanding what you are sending it or you are out of sequence in the DataArrival event.

yes, it was the zip file from the other thread.
It works to send to the email address on my web host, but does not work to send to yahoo.

Here is where the code stops:

mvarWinsock.SendData "RCPT TO:<" & mvarRecipient & ">" & vbCrLf
MsgBox (WaitFor(OK))
If WaitFor(OK) Then

GiveError
mvarWinsock.Close
Exit Sub
End If

I inserted the msgbox to confirm that it never returns a value from WaitFor() after it sends mvarRecipient (when mvarRecipient is my yahoo address)

I put a debug.print inside the WaitFor loop and the result was that for about 10 seconds or so, it returns value 550
Then it switches to value 503 for maybe 10 more seconds
then it switches to value 500 and stays on that until eventually the app crashes trying to close mvarWinsock.Senddata "Quit".

yes, it was the zip file from the other thread.
It works to send to the email address on my web host, but does not work to send to yahoo.

That's the same one (except slightly changed for my server) I used to send you a message at Yahoo.

The code you are posting is not from that program. You should use a DataArrival event like I do. That way you can catch each return response from your email server at the point you believe it should be at. One thing about SMTP you must respond with the correct response or you will not be able to send mail because you can get out of sync and that will screw up everything.

BTW: Who is your primary email server? Is it your ISP?

it's not my isp, it's the webhost where I have several websites.
The email addresses are from my domains.

@wengang:

did you bother following that link I posted for you (see very first reply).

it's not my isp, it's the webhost where I have several websites.
The email addresses are from my domains.

So how do you make your Winsock application (Im assuming you are running it on your home computer) connect to your Host? For example, if you send me email at [email protected] it will go to my mailbox at the hosting server machine. If I want to send email from my Website I have to logon to my WebSite an click on a button that brings up the Mail Panel. From there I can type a email message and click on send. But I have to be at the WebSite to do this. How does your program handle this? I'm a little lost here when you say you send out email from your website yet your website is not the OS that your VB Winsock is running on. So what are you doing to make this happen?

I guess where I'm getting confused is how do you send email to your email server at the host and then have it be sent to a Yahoo address? If I send me email at jms@codeavenue it will go to my inbox at the host email server for me. I can, however send email to me and also have me as the recipient but I cannot have someone else be the recipient. Understand? Now, if I went to my Website and logged in at the mail panel then I can send to someone else but not from my home. I really need to get a clear understanding what you are doing.

Quote:

---

Originally Posted by RhinoBull

@wengang:

did you bother following that link I posted for you (see very first reply).

---

See post #25