How long to learn .NET???

Ok, as some of you are aware I am not a beginner programmer, and some of you know the amount of VB I know. However, I know zero .NET. How long would it take for me to learn, if I was learning 9 till 5 every day, .NET to a standard when I can write apps like I write at the moment using VB6...?

Strange question I know. But people at work want time scales on development and .NET *sigh*
I said about 4-6 months of learning and training...would that be aboot right or is that WAYYYY to much?

Woka

If you have VB6 and a basic understanding of the Win32 API then 2 months of real world programming should be sufficient to be proficient.

I have 2 months now and I find it quicker to knock together applications in VB.Net than VB6 these days.

Win32 API?
You mean API functions? Sorry I must sound well thick :( *sob*

Your knowledge of API is almost unmatched on this board so does that mean it would be harder for those of us who are mere mortals to learn? ;)

I still can't get my head around classes not having a terminate event when the object is "destroyed" :(

Do you know of any good .NET tutorials that I could run though?

Woka

I think I must be the one who is thick.... what does knowing APIs have to do with learning .NET?


Woka - I think it would depend on how much time you invest in learning, if you woirk with it for 8hrs a day, every day (during the work week) then 4-6 months is probably a bit long.... So far this year, I've spent a total of 2 hours working with C#.NET.... I now understand how it works a bit .... I did the typical "Hello World" app, all w/o a tutorial (actually I was writting one... it can be found right here .... but I digress.... I imagine you are talking about VB.NET.... VBCity.net has some good resources....

i would say your estimate of 4-6 months for a good grip of the OOP fundamentals is fair. I have been using .NET for just short of a year and i think i can get away with most (?!) of it ;)

Lots of examples out there. I think MSDN is as good as the next. There have been a few recomendations for books in this forum, check them out - especially the ones which focus on design patterns, because in my humble opinion this is the biggest challenge in shifting from VB6 to .NET. The syntax is fairly straightforward and you will grasp this well under your 4-6 month learnming period. Maybe even pick up a book on UML if you feel keen!

As for destroying objects - you only need to worry about this if your object is hoggin' a resource (say a DB conenction), otherwise the garbage collector will take care of cleanup. In short an object will not just die when you set the reference to nothing - it needs a little help from you the programmer. Java developers have been doing this for years.

Cheers...

Set equakl to nothing IS a little help from the programmer...to me that suggests that I may actually want to destroy the object. I am not happy with things like "garbage collectors"...as I like to have 100% control of what is created and destroyed and when it happens.

One thing I do know and that is I don't do books :( I find books misleading and inaccurate for real world applications. they teach you cheap short cuts to get you on your way. I have still never read a VB book and come away thinking that I got something out of it...in fact i am more stupider after reading the book :(

I have written a Hello World app in .NET and done a few properties in a class, but then got caught out when I couldn't fire the terminate event of the class...so I gave up :D Oh, and Form)Unload too...Hahahaha

I would say that if after a year I didn't have a grasp on most things with .NET and I couldn't write some proper apps then I would be VERY VERY pissed off. However I hate computers and don't really enjoy going home and learning.

They have just put in a time scale for resources and development and training...looks like we are buying .NET in Feb to June...in 2000 and ****ing 5!!! :( Arrrrrrrrggghhhhh!


Woka

Quote:

---

what does knowing APIs have to do with learning .NET?

---

Large sections of the framework are just wrappers on existing API functionality - particularily the threading/waitable timers type stuff.

Quote:

---

I am not happy with things like "garbage collectors"...as I like to have 100% control of what is created and destroyed and when it happens.

---

If you have a class that does something when it is terminated then you should give it a Dispose method and make it implement IDisposable...e.g.

VB Code:

Public Class Woof
   Implements IDisposable
 
   Public Sub Dispose() Implements IDisposable.Dispose
      '\\ Do your cleaning up here...
   End Sub
 
End Class

This is how things like controls that have to dispose of windows resources are coded.

perhaps the 'set to nothing' was a little misleading - VB6 will destroy an object when it's COM ref count reaches zero. Setting the object ref to nothing does just that - resets the counter.

There are techniques out there to kill an object dead like forcing a garbage collection (although even this is open to debate as to whether the memory is truly freed) The thing is the GC is there to manage memory for you. If you machine resources are tight the GC will be called more often. It's no biggie.

I largely would go along with your opinion on books. I never learned anything from making online camera shops or step by step chapers on buiding orders databases BUT there are a few good reference books available. They list the possibilities and leave the rest up to you.

Lastly everyone differs on how they rate themselves - for me a year using a technology like .NET is not long at all. I wouldn't rate myself as advanced, others with the same amount of time under their belt might.

Hmmm....perhaps thats why my wages are 5hite <cough> i am now an ADVANCED .NET developer everyone!!

if u don't mind me asking, how much you getting paid for .NET?

Woka

Don't suppose i do...

I've had my ups and downs - right now iam on LESS wages than during the golden years but round about the 27-28k (sterling) mark (depends a lot on bonuses etc.)

But strictly speaking iam not a PURE .net developer by trade. I turn my hand to Java (long time ago though!), Oracle, MS stuff, UNIX the ARSystems Remedy product etc and of late a bit of .NET. I am a jack(ish) of all trades master of none sort.

That's 8k more than me :(
I am trying to get an 8k payrise but it looks like managers arn't gonna budge...Booooooooooooooooooooooooooooo
AND they won't go to .NET...they say Feb - June 2005...but that is MILES away, and i doubt they will do it anyways :(



Woka

Two weeks I think is enought since you have good grasp of VB6 . You'll find it so easy after the first week . For the API part , yes you need it while working on advanced GDI because the current GDI+ is basic and sux .

I'd say working on it 8 hrs a day you could do the same kind of work you do now in .NET after 1-2 months or so. And after about 4-5 months you'd be doing them more in a .NET fashion. One thing that I think makes .NET easier to learn is that its all OOP driven so if you learn the key concepts they apply to everything. For instance your terminate issue, all objects use the same model for destruction so once you understand how dispose works then you know how ALL objects dispose and EVERYTHING in .NET is an object. Also the use of interfaces and things of that nature make a lot more sense in .NET (at least to me) since it has all of the other OOP features too. Then interfaces become kind of like roles that an object can play. I also think that you have done a lot of class work in VB6 which will help you learn .NET faster.

As for your terminate event issue try this:

VB Code:

Public Class Wolf
    Implements IDisposable
 
    Public Function Howl() As String
        Return "Aaaaawwwwwwwhhhhhhhoooooooo"
    End Function
 
    Public Sub Dispose() Implements System.IDisposable.Dispose
        'you would release things here and it works like the terminate event
        MsgBox("I'm done for!")
    End Sub
 
End Class
 
        'it is no longer bad to use New when declaring your object
        Dim bigbad As New Wolf
        MsgBox(bigbad.Howl())
 
        'instead of setting it to nothing you call the dispose method
        bigbad.Dispose()
 
 
        'or if you want to you can still use nothing and dispose
        bigbad = Nothing
 
        MsgBox(bigbad Is Nothing)

After programming in vb6 for 3 years, I started working for my present company and we developed our initial proptotype in vb6 in late 2002. In Feb 2003 (on the day of the official release of .net) I started a 1 month investigation/self-training in .net, and we re-wrote the app in .net. I reckon it took me 2 months to grasp the basics and after 4 months could write an app faster in vb.net than vb6. Once youve spent a couple of weeks with .net, you just won't want to bother with vb6 anymore.

You will find the trasition much much easier if you had made proper use of class's in vb6 to encapsulate your code.

Actually this may work more like you want:

VB Code:

Public Class Wolf
 
    Public Function Howl() As String
        Return "Aaaaawwwwwwwhhhhhhhoooooooo"
    End Function
 
    Protected Overrides Sub Finalize()
        ' clean up code goes here 
        MsgBox("I'm done for!")
    End Sub
 
End Class
 
        Dim bigbad As New Wolf
        MsgBox(bigbad.Howl())

Run the code and when you close the app the 'terminate' event will fire. If you want to track it there as well as have the ability to fire it at will then use the Finalize method as your event like here but also implement IDisposable like I showed before. Then you can force the terminate with object.Dispose or catch it when something else causes it to be disposed.

http://www.developerfusion.com/show/1047/3/

Quote:

---

Originally posted by Wokawidget
if u don't mind me asking, how much you getting paid for .NET?

Woka

---

32

Just a recommendation, if your whole team wants to switch over, and management doesn't want to foot the bill for training, maybe you can compromise. What I mean is you could hire a .net architect and a .net developer for a project your company wants in .net. The architect can design the app to be fully oo and take advantage of the .net framework and the developer can assist and train your team as they develop the project.

Of course, a week or two of your team playing around with .net before hand would help a lot.

Sure, the cost of the architect and the developer will be more money, but your company wouldn't lose 4-6 months on training for the whole team because they would learn as they go.

I don't think there is any better way to learn .net than to actually do a project.

Just my opinion.

Quote:

---

Originally posted by Wokawidget
if u don't mind me asking, how much you getting paid for .NET?

Woka

---

I am asking $30 US an hour for a contract I am bidding for.

A few months back, me and about 6 other consultants were billing out at $65 per hour on a .NET project.

So, if I set to nothing then the Dispose method gets fired?
Does it have to be public? I don't like the idea of manually typing that code it just for an event...if I manually do it then when I set to nothing does it fire it again?

wolka

To start off most items will not need to handle anything in a terminate event. This is intended for things like a database connection or window handle or something that is a resource hog. For normal items you really don't need to use Nothing or dispose the GarbageCollector will handle all of that for you.

But in more detail when the GC does its collecting it calls the Finalize method of an object, which is a protected (protected is private to all but children of that class and the gc) method in Object, and all objects derive from Object so they all have a 'hidden' finalize method. Now if you want to fire this yourself the implementing IDisposable is the proper how of doing so. This creates a Dispose method that should can call finalize and then tell the GC not to worry about that object (GC.SuppressFinalize(Me)). Keep in mind that the object can call Finalize directly from within itself, dispose is to allow that functionality to be called from outside the object.

So basically Dispose is just a way for outter objects to call the objects finalize method and finalize is basically the new Terminate event.

I should probably shut up now because I think I'm making it worse.

So, if I set to nothing then the Dispose method gets fired?
No nothing gets fired until the GC collects the object.

Does it have to be public?
No it doesn't but there is no need for it if its not.

if I manually do it then when I set to nothing does it fire it again?
If you manually call the Finalize method then yes it will fire again when the GC collects unless you add the following line also:
GC.SuppressFinalize(Me)
Which tells the GC not to worry about it anymore and prevents it from firing again.

I see you are making the switch to .NET just because of Disposing issues :eek:. .NT has much more to present :D

I don't want to move to .NET...I am scared :(

Woka

Quote:

---

Originally posted by Wokawidget
I don't want to move to .NET...I am scared :(
Woka

---

I was scared too because I thought I have to forget VB6 and throw its CDs and uninstall it too .

in VB.NET forum , we give prizes for newcomers....:D . So , don't panic and think forward . VB6 will be dead sooner or later , .NET will continue for sometime , though I have some issues with this .NET me only :(.

Quote:

---

Originally posted by Wokawidget
Win32 API?
You mean API functions? Sorry I must sound well thick :( *sob*

Your knowledge of API is almost unmatched on this board so does that mean it would be harder for those of us who are mere mortals to learn? ;)

I still can't get my head around classes not having a terminate event when the object is "destroyed" :(

Do you know of any good .NET tutorials that I could run though?

Woka

---

when i started .net i did know 0 about win api and i was bad at vb6

even then i catched it up pretty pretty fast with a book i bought(for c#)

One good reason for moving to .net is that you DON'T have to to know about API's.

Another good reason is that you don't have to worry yourself so much about setting objects = nothing and using Dispose methods. "Dispose" is not like terminate, it will not get called automatically. Calling it "Dispose" is just a convention anyway, you could call the method "Woka" if you wanted, it wouldn't make any difference.

Don't be scared. The thing I enjoyed most about making the switch to .net was the fact that it was good to learn something new. I needed a change, and I was sick of the vb6 IDE.

Ok...right lets clear something up as I am well confused...:confused:

I have a class called Users and a class called User...

So, I have the code:

VB Code:

Option Explicit
 
Private mcolItems   As Collection
 
Public Property Get Item() As User
   Get(ByRef Index As Variant)
      Return mcolItems.Item(Index)
   End Get
   Set
      'nowt goes here
   End Set
End Property
 
Public Property Get Count() As Long
   Get
      Return mcolItem.Count
   End Get   
   Set
      'Nowt here
   End Set
End property
 
Public Function Add(ByVal Username As String) As User
Dim objUser   As User
   objUser = New User
   objUser.Username = Username
   mcolItems.Add objUser   
   Add = objUser
End Function
 
'Dunno the class initialise, so I'll use vb6 code :D
Private Sub Class_Initialise()
   mcolItems = New Collection
End Sub

Ok, here's a class in VB .NET...excuse the syntax as I don't know .NET and was just typing from the top of my head from what I have seen.
Anyways...I have this class referenced in a form...
What u are saying is that I can never toast this class, or the collection object OR the items held in the collection object UNTIL my app closes?!
As setting to nothing would not destroy the collection...?

This, to be fair, sounds absolutely ****ing stupid! :( Doesn't that mean it will start hogging memory? It also means I have to write more code as on the terminate event I may want to write some DB stuff or to an ini file, but now I manually have to code this in...>?

Woka

VB Code:

Public Class Users
   Inherits Collections.CollectionBase
   Implements IDisposable
 
 
   Public Overridable Function Add(ByVal userObject As User) As User
      Me.InnerList.Add(userObject)
      Return userObject
   End Function
 
   Public Overridable Function Remove(ByVal index As Integer) As User
      Remove = CType(Me.InnerList(index), User)
      Me.InnerList.Remove(Me.InnerList(index))
   End Function
 
   Public Overridable Sub Remove(ByVal userObject As User)
      Me.InnerList.Remove(userObject)
   End Sub
 
   Default Public Overridable ReadOnly Property Item(ByVal index As Integer) As User
      Get
         Return CType(Me.InnerList.Item(index), User)
      End Get
   End Property
 
   Public Sub Dispose() Implements System.IDisposable.Dispose
      'do any cleaning up here, but you don't have to bother removing all your items as memory management is handled automatically if you inherit from  Collections.CollectionBase.
      'all you would do is use something like yourUsersObject = Nothing
   End Sub
End Class

errr...
Why for the remove function/sub does one return the value and one = the value...whats the difference???

What is I want 2 collections in my class???

What does overridable do?

How does VB.NET know when I want to toast that class and all it's items in it's collection?

Woka

Why for the remove function/sub does one return the value and one = the value...whats the difference???

>> Doesn't really matter. Return a value only if its usefull. I just copied and pasted one of my own collection classes and chaged the type to 'User' for your example.

What is I want 2 collections in my class???

>> Why? You could do this if you want, but this would not really be a collection class. When you inherit from a collection, then Users is a collection. Better to create another class, and have (as property's) two different collections. Please explain what you are wanting to do.

What does overridable do?

>> If you inherit from the User class, (e.g. an AdvancedUsers collection class) you can have a different implentation of the method if you wish. Overridable is optional, but if you intend to inherit from your Users collection class, then overridable gives you that option. Any good book on .net will give you all the info on this stuff.


How does VB.NET know when I want to toast that class and all it's items in it's collection?

>> You will have a _users variable somewhere. When you want to toast it use:

_users.Clear
_users = Nothing

I want 2 collections as I have a collection for cureent items and a collection my deleted items....tranasctional and n-teir programming...

So

Return objUser

Is the same as

FunctionName = objUser

????

Woka

Quote:

---

So

Return objUser

Is the same as

FunctionName = objUser

---

Yes, although the former is the preferred way.

Take a quick look at this for a quick reference. It has a small section on .NET object lifetimes. But make it quick. Fridays are not for reading or learning.

Cheers...

Cheers.
No fridays are for me to get shouted at coz my app doesn't work because someone has change the network and DNS servers...also HUGE database ****-up :( Arrrggghhh...what's going wrong :( *sob* I hate fridays...

I need drooooogs

drugs attached...

something like this:

VB Code:

Public Class Users
   Inherits Collections.CollectionBase
   Implements IDisposable
   Private _deleted As Users
 
   Sub New()
      _deleted = New Users
   End Sub
 
   Public Overridable Function Add(ByVal userObject As User) As User
      Me.InnerList.Add(userObject)
      Return userObject
   End Function
 
   Public Overridable Function Remove(ByVal index As Integer)
      Remove(CType(Me.InnerList(index), User))
   End Function
 
   Public Overridable Sub Remove(ByVal userObject As User)
      Me.InnerList.Remove(userObject)
      _deleted.Add(userObject)
   End Sub
 
   Default Public Overridable ReadOnly Property Item(ByVal index As Integer) As User
      Get
         Return CType(Me.InnerList.Item(index), User)
      End Get
   End Property
 
   Public Sub Dispose() Implements System.IDisposable.Dispose
      'do any cleaning up here, but you don't have to bother removing all your items as memory management is handled automatically if you inherit from  Collections.CollectionBase.
      'all you would do is use something like yourUsersObject = Nothing
   End Sub
 
   Public ReadOnly Property Deleted() As Users
      Get
         Return _deleted
      End Get
   End Property
End Class

Quote:

---

Originally posted by PeteD
One good reason for moving to .net is that you DON'T have to to know about API's.

Another good reason is that you don't have to worry yourself so much about setting objects = nothing and using Dispose methods. "Dispose" is not like terminate, it will not get called automatically. Calling it "Dispose" is just a convention anyway, you could call the method "Woka" if you wanted, it wouldn't make any difference.

Don't be scared. The thing I enjoyed most about making the switch to .net was the fact that it was good to learn something new. I needed a change, and I was sick of the vb6 IDE.

---

Thats correct, "Finalize" gets called automatically and is like terminate. Dispose is just a method of exposing the finalize method external to the object.

But you shouldn't have to worry about terminate or =Nothing anymore unless you want to do something specific at terminate.

I studied for 8 hours a day for 4 weeks, and was able to pass the 70-306 and 70-310 exams. And then with another week or so of playing, and I was an expert with VB.NET. If you know VB6 then deffinitely go to VB.NET.

That would be a total of about 5 weeks. If you weren't going to pass the Microsoft Exams, and just learn it for your job, then you could probably do it in about 3-4 weeks.

Learning it all that quickly, I felt like a machine. I fell in love with .NET, so I guess that helped alot. :)

And if you know how to use Win32 API calls, it is basically the same to use them in .NET as it is in VB6. The exams do not cover API calls at all. API's are not managed (.NET) code and Microsoft does not recomend for you to use unmanaged code in .NET.

But of course you will never have competely learned the language after n weeks. You may have learned enough to be fairly competant at what you want to do at that time, but the language is so vast (like so many languages), that you never acually stop learning, even after many years.

...Unsubscribed...

Quote:

---

Originally posted by Wokawidget
crpietschmann: Is that 8hrs a day fro 4 weeks from knowing nothing about .NET and only knowing VB6 when you started learning?

My company is looking at moving to .NET between Feb and July :D
...2005

---

Yes, I was a MCSD with VB6, and knew nothing of .NET. It easier when that's the only thing you have to think about all day.

I would probably tell your company 6 - 8 weeks, and then they will be surprised when you get it done faster.