Hello,Quote:
Originally Posted by LinkFX
You can use the tool "Resource Hacker" for edit resource
http://www.angusj.com/resourcehacker/
Can you use "Command Line Syntax"
Printable View
Hello,Quote:
Originally Posted by LinkFX
You can use the tool "Resource Hacker" for edit resource
http://www.angusj.com/resourcehacker/
Can you use "Command Line Syntax"
What are you talking about? Have you even read the post you're quoting in its entirety?Quote:
Originally Posted by pepegriyo2016
There's far too many languages and variants of VB6 to make patches for all the individual versions. It's a process that takes a fair amount of time, and this would be like playing a game of whack-a-mole.Quote:
Originally Posted by pepegriyo2016
So what I'm going to do instead is make on-demand patches for different languages of the binaries freely available through Microsoft.
Here's a link to the Spanish SP6: https://www.microsoft.com/es-es/down...s.aspx?id=9183
Here's a link to the French SP6: https://www.microsoft.com/fr-FR/down...s.aspx?id=9183
I'll have patches for these soon, and those of you running these languages can use the binaries linked. Just open the downloaded .exe in something like WinRAR or 7zip, the binaries are inside VS6sp61.cab in the VB98 folder. Then you can apply the patches to these binaries and replace your original files.
Quote:
Originally Posted by LinkFX
You can replace the OllyDBG by Resource Hacker for edit the resource. Try open the vb6.exe with Resource hacker.Quote:
The only thing you'd be missing then is the assembly patch for VB6.exe to load the new 24-bit images, otherwise it will load them in reduced 4-bit color. This step is a fair bit more complex however and requires a good knowlege of computer internals to perform. To perform this patch you must open VB6.EXE (post resource patching) into a disassembler like OllyDbg, IDA Pro or x64dbg and locate the calls to LoadImageW that load the bitmap resources 6000, 6700 and 6701, which all need to be patched. I recommend using API Monitor intercepting that specific API until you see it load the relevant resources. You can then obtain the correct offsets for the calls from API Monitor. After you have the offsets, you have to edit the VB6.exe executable with your disassembler of choice and replace the fuLoad parameter in those calls, to ensure it pushes LR_CREATEDIBSECTION onto the stack. Depending on your executable's binary code this may involve some very basic assembly control flow rerouting to fit.
I will just ignore you from now on. Learn to read.Quote:
Originally Posted by pepegriyo2016
I think the left icon maybe in vb6.exe RT_ICON #1252/#38，the right icon maybe in Mrt7chs.dll RT_ICON #109/#4 or #185/#18，hope it's something help for you.Quote:
Originally Posted by LinkFX
I download this Sp6 and extract the VB6.EXE&VBA6.DLL&VB6IDE.DLL, but the MD5 didn't match with yours. It's only the VBA6.DLL can patched.Quote:
Originally Posted by LinkFX
For the Chinese users
https://www.microsoft.com/zh-cn/down...n.aspx?id=5721
Could you patch for this.
Thanks, but all the icons in VB6.exe have been replaced, so if it were using those they would have been changed already. No matter, Olaf hooked me up with a good solution for this.Quote:
Originally Posted by vb56390
I'll look into it. However, do note that I will not be changing the dialogs for the other languages, since that would require manually redoing them (otherwise they'd end up with english text). So only icons and bitmaps will be updated, and you'll miss out on the updated dialogs.Quote:
Originally Posted by vb56390
I recommend everyone to simply use the English version of VB6, even if English is not your native language (it is not my native language either).
i think maybe you can share your unpatched files for reference.Quote:
Originally Posted by LinkFX
maybe i can do the binary patch myself.
because it seems hash of vb6sp6 english files download from msdn are all not equal to that hash of yours
Hello,
I followed the advice of LinkFX and I patched the English version SP6 and everything works correctly, it's really a radical change.
It is advisable because if later, LinkFX must modify the * .xdelta, it would be a lot of work to maintain all the languages especially since we know all the options by heart.
By cons for the Chinese who are many to use VB6 it would be very useful.
Regards
can someone make the video or step by step tutorial to change to ModernVB IDE ?
Could you share the patched files with us ?:DQuote:
Originally Posted by camomille
Oblige to uninstall ModernVB.dll because reduces the width of the tabs of my browser "Chrome" and is no longer readable !!!:blush:
For jedifuk and vb56390 and loquat
You missed post 46
http://www.vbforums.com/showthread.p...ly-for-testing
https://github.com/VykosX/ModernVB/releases
Tab "Realese"
Footer "Assets"
Everything is explained in the folders
Regards
I don't understand this... What do you mean?? ModernVB doesn't do anything to Chrome.Quote:
Originally Posted by camomille
Here are my unpatched files. But you can also use the English SP6 binaries. The VB6.exe does not match checksum but it patches perfectly if you tell DeltaPatcher to ignore checksum. They are binary compatible, so I can only assume it's a trivial difference between the files. I'll make a patch that matches checksum with the English SP6 files along with the Spanish, French and Chinese ones soon.Quote:
Originally Posted by loquat
I do not know the relationship, but I had never seen that, since yesterday, the tabs tighten on the left, width 5 mm, only the right one is normal, despite uninstalling your dll, it still occurs !!
I'll keep you posted if I find a reason.
Yeaaah it's not related to ModernVB man... Try reinstalling Chrome I guess or better yet switch to Vivaldi which is Chrome but way better lol.
I said "Chrome" in fact it is "Chrome developer" which is more stable especially in translation.
But after previous restoration, reinstallation, always the same problem, can be an update !!!
On the other hand I uninstall everything from your project because it is impossible to launch my main program which opens normaly in full screen with 4 tabs.
The windows are moving but my program does not appear.
Maybe because I didn't install the themes?
all three original files equal to what you giveQuote:
Originally Posted by LinkFX
only one question left maybe, can you make sure that, tell DeltaPatcher to ignore checksum when it patches vb6.exe, would be correct and accurate?
i will check the patched bytes to help.
i m Chinese, are you? if so, my QQ 469855454, maybe we can play with vb6 together.Quote:
Originally Posted by camomille
No sorry, I am French but I am very interested in what is done in China because there are very strong teams and I am very ready for this development:
http://www.yfvb.com/soft-48.htm
It is very close to what you can do with VB6 and recognizes its instructions as well as that of C, in some cases it dominates it with GDI and GDI + incorporated (database of 110,600 lines of recognized words).
I tested for 1 month, it is a very good tool but the big problem is that there is no debugging tool and that following my request it is currently only partially translated into English, but progress is prodigious (2 to 3 versions per month).
So my favorite is still VB6 but for how long.
I have a QQ code which allows me to download the program but which does not allow me to register for the club and also not to download on Baidu to test for example this customizable VB6:
https://www.52pojie.cn/forum.php?mod...ead&tid=876150
Regards
You only need to ignore checksum if you're using the English SP6 files, not the ones I supplied.Quote:
Originally Posted by loquat
This Visual Free Basic is really, really interesting. It's a real shame it's not in English though. That greatly limits its usefulness. My native language is Portuguese but I've never written a single line of code in Portuguese in over 10 years, nor would I ever, because English is the de facto international language and using any other language limits your scope and the usefulness of your programs.Quote:
Originally Posted by camomille
if, if it is in English, but as it is not the priority, only the main menus are translated by the designer, eventually and as he has to translate the internal menus. At the beginning it was impossible for me to understand what because it's entirely in Chinese but now I don't pay any more attention to it and I manage to program.
I know it's off topic and I apologize but for the curious like me, any information is good to take.
On this page it indicates the differences with VB6 (+=,-=,ShiftR,ShiftL,Dim As Integer a,b,c,d,e,f) etc...
http://www.yfvb.com/thread-6551.html
Here are some of these achievements related to programming
Windows Manager (Spy +)
http://www.yfvb.com/soft-102.htm
Memory editor
http://www.yfvb.com/soft-37.htm
Library viewer
http://www.yfvb.com/soft-191.htm
Hexa editor
http://www.yfvb.com/soft-181.htm
Very much looking forward to this getting translated. Maybe some of the Chinese users here could help out and offer to translate it.
IMO, this is only a "chinese-translation" of "WinFBE for FreeBasic"
(written in a team-effort by Paul Squires and Jose Roca)...
This IDEs first release was posted in 2016 - and is still actively maintained
(see this longer thread here, in the FreeBasic-Forum - Links to recent versions are in Post #1):
https://www.freebasic.net/forum/view...hp?f=8&t=25215
HTH
Olaf
I created an automatic software under VBA (which recognizes Chinese) and I had the 100,600 lines of the database translated from Chinese to English.
So it's going !!
Guess our postings have overlapped... (so, please look at the link I've provided in the posting above yours).Quote:
Originally Posted by camomille
More frankly spoken: ... there is no english-translation needed!
(because the original of that IDE is in english, last release only 3 days ago).
The chinese version is only a derivate of it (easily seen, e.g. when you look at the ToolBar-Icons).
Olaf
the vb6 sirk mini 20192020 is an chinese version, do you really need it?Quote:
Originally Posted by camomille
We just download the release package, but the patcher seems didn't work that maybe the diffrent MD5 of the VB6.EXE file, and if I don't check the checksum validation and patched the file, then open it , the message show that there is a referer request from the server! and then program ended.Quote:
Originally Posted by camomille
So I think there was something different with my vb6.exe which is download from MS the link givvend by LinkFX and yours .
My files(version of : 9782): MD5
vb6.exe : 3F36E40B7A9FB6FB87E93241D258B35C
vba6.dll : CAC38827BCD9F710EAE33F949F96EF96
vb6ide.dll : 278E2CB9140BEEB92C5397B4D8B86D3A
I know WinFBE or VISUALFBEeditor but they are both pure FreeBasic oriented and I am unable to write 20 lines!Quote:
Originally Posted by Schmidt
WinFBE is not practical to use (no printing and no debugger)
VisualFBEeditor is oriented VB.net (with Printing and debugger)
With VisualFreeBasic, despite that half is in Chinese, I find my programming under VB6 at 80% (for me it is a significant interest), I can easily convert VB6 and the environment is comfortable, despite everything no printing or debugging.
This is only my impression and it engages only me, but despite the handicap of the Chinese, I much prefer VisualFREBasic5.
For me it only needs a VB6 level debugger.
aesthetic comparison
Attachment 176633
No thanks, but it is interesting to know that you can use Baidu.Quote:
Originally Posted by loquat
To reiterate. For everyone currently having issues with ModernVB. Use the English version of VB6. No other versions will currently work.
Since there's a popular demand, I'll eventually make patches for Spanish, French and Chinese, as well as update the ModernVB addin to support other languages (it also only supports English at the moment). This process takes considerable time so you'll have to wait a while.
In the meantime, I'm temporarily providing pre-patched binaries for the English version. This is not ideal because these will get stale as new updates are released, but until such time as the other language patches are available, I'm leaving these as an option for those who were not able to patch correctly.
Download pre-patched Binaries
P.S. You still need to download the latest release from GitHub and follow the included instructions. It is not sufficient to simply replace these files. This is just one step in the installation of ModernVB.
Quote:
Originally Posted by LinkFX
i have done most of the resource replacing work.Quote:
Originally Posted by LinkFX
but there are two problems.
1.for vb6.exe, icon group 1200, has 2 icons original, but your icon group has 8 icons. my question is, does the icons number and id in the icon group matter? if answser is yes, then how to fix the icon id in icon group.
2.for vb6.exe, loadImageW, i can not do that myself, have tried. is there any easy way? or does that matters a lot?
i have found that the 1st question above is need to fix, because i found my add menu in project explorer(ctrl+r) still show old icons.Quote:
Originally Posted by loquat
I download the package and the pre-patched files which you given，then step by 1-4 （in step3 just replace the file with you given)，the error accured againQuote:
Originally Posted by LinkFX
Attachment 176625
Just mean that there is a referer request from the server! Click OK and then the program ended.
No idea. Must be some incompatibility in your OS or something. Wait for the next release with the Chinese patch and try that.Quote:
Originally Posted by vb56390
This is a brand new ide editor. It's not just translating a foreign software into Chinese. Just like vb6, we can write a plug-in to enhance the functionality of vb6 ide, or we can rewrite a brand new IDe, but using the same compiler.Quote:
Originally Posted by Schmidt
vb7,vfb"visual freebasic":
5.2.12
Tab control to fix the binding window, the window name for the Chinese can not compile the problem.And setting child windows.
Added MsgBox function for VB6 compatibility
In the new menu editor, set the icon to the font.(If it is a custom font, you need to load the font in the start module first.)
Fixed window never active property, not perfect, improved initial display and Visible property, responded to WM _ MOUSEACTIVate to ensure no focus.
Modify the window class to support the W character ClassName WindowPlacementSave WindowPlacementLoad.
Add the open project tab, library tab and help tab, etc the mouse moves above prompts related information.
Modifying the color picker, switching to System and Reference will automatically select a color entry based on the color.
New window shadow, multi-level shadow selection, automatic foreground when the shadow, automatic background when the shadow light.Supports XP system, suitable for adding shadow effect to borderless windows.[Highlights]
Add HH _ SuperRunExe function with system authority to run EXE
Fixed ListView control, editing does not display the contents of the list and the grid and check box does not display the problem.
New ListView control, LVN _ ItemActivate event
Modify the bookmark list to use a ListView control instead
Correction Code
Since the birth of VisualFreeBasic5 from FreeBASIC for more than a decade, its IDE has been in the state of code editor, there is no automatic processing, in addition to senior programming experts can use, novice can not start, can not know where to start. It was not until 2015 that the FireFly software developed by American Paul Squiz greatly simplified FB programming so that novice could also write software in FB. Although FireFly has brought great progress to FB's IDE, but many are not satisfactory, it is really difficult to use, so it took more than two years to patch FireFly in 2016, because there is no source code, it can only be repaired with DLL combined with plug-in technology. A lot of experience in IDE has also been accumulated in the study of FireFly. Since FireFly 3.X patch, changed for more than 2 years has been very mature, named VisualFreeBasic 4.X, but because there is no IDE source code, can not continue to improve, add better functionality, so in June 2019, from scratch, it took five months to write VFB5, in VFB4 (with experience and imitation, and with a lot of previous code written for FireFly, only a short time to write, if nothing, because Yong Fang wrote it alone. It is expected that for at least a year), a stable beta version has been produced, so VisualFreeBasic5 was born. Programming is endless, life is endless, and VisualFreeBasic is going to get better and better, and it's going to be better and better. A lot of people wonder? FireFly 3.X has not been updated for so many years? Yes, no update, because FireFly is developed with PowerBASIC, not FreeBASIC, Paul Squiz wants to use FreeBASIC to develop, starting in 2017 to develop software called WinFBE, and open source, but the development efficiency is too low, three years later, the software looks still semi-finished, and only suitable for experts to play, novice can not play at all, and seriously deviated from the original FireFly way.
just like powerbasic,can make 64 bit application. But there is no way to visually design the form to write code just like a notepad editor, there is no smart prompt function at all. It should be said that he has a relatively powerful compiler, but IDe is really garbage.
In fact, relatively speaking. Really want to do a good job, from the compiler to the IDE, as well as help documentation, the forum community to do a good job in all directions, really not easy.
In this regard, China has button wizard, easy language, there are many self-created, some IDE and rapid development tools.
在这方面，如果我们能够做到像。In this respect, if we can do the same as Super Apple's cell phone design.That's pretty good, too.Learn from each other's strengths and weaknesses, first from imitation, and then beyond.I always do my own, never learn the advantages of others.That hotel is going to be eliminated, and it is very difficult to use.
This is how Microsoft did it, and Google Chrome became the world's number one within a few years. But Microsoft is still doing its own thing, it can be said that there has never been innovation, just like Intel CPU squeezed toothpaste. The good thing about Google Chrome is that they never learn. The slower and slower their products are, they are very crap.
Languages "e", this is a Chinese programming language, just like VB6 syntax.
The second piece of software is like "auto3":
Key wizard is a simulation of the mouse and keyboard action software.By making a script, you can let the button wizard replace your hands and automatically execute a series of mouse and keyboard actions.
Keysprites are easy to use and require no programming knowledge to make powerful scripts.As long as you use both hands in front of the computer can complete the action, button wizard can be replaced to complete.
A good ide code editor is not just a simple interface beautification.Just like the appearance design of Apple's mobile phone, you don't copy it casually, and then Android's mobile phone is the same as Apple's?Just like China WPS, similar to office software. After more than 20 years of efforts, the shares finally went public, worth hundreds of billions. Before that, he was only limited to the Chinese government's resistance to Microsoft's monopoly in some cases. It can be said that the development cost invested for this purpose is very huge and really bottomless.For a long time there was no hope of profit at all.In the development of programming IDE, it is very difficult to improve the function.For example, Xiaomi 8 mobile phone, Apple's desert background picture, change the color, this will become a snow mountain? And the design is very similar to apple.Plagiarism design is also a kind of progress sometimes. At least it means that you want to do the same or better as him.In recent years, Nokia has been flipping over screens and keyboards. Do not want to be enterprising, do not despise the progress of others.If we want to create a new era of IDE, like visual studio 2019, like Delphi, it is not a kind of progress.The key is to develop ide. It's really hard to make money from it, and the development cost is quite expensive. Even large companies can't last for years.
I want to make the ide interface cooler and trendier. , The best way is to write add-in plugin. You can replace all the menus and the toolbar above. Rewrite an ide interface yourself, hide the original vb6 development tool interface, only use its code editor, and visual form design. Most of the menus and toolbars can be controlled by add-in.
I remember that I have seen a version called vb6.5 before. Also modified the vba. Dll resource file. I think I will find it in my backup!
VB6.5 is stopped
http://www.vbforums.com/showthread.p...spaces-release
Regarding VFB 5.2.12
It is true that if everyone in the world could join hands (especially specialists like LinkFX, Schmidt, etc.) with Yongfang, we would have a 64-bit VB6 with modern design and functions.
Its latest version released today is even closer to VB6.
Alain
Here is an example of VB6 to VFB5 conversion (not finished) done in a few hours
The program has about 2000 lines and the rewrite of 1000 lines in a few days without tearing your hair and fingers in the nose :o !
Attachment 176663
Comfort for working with GDI, GDI +
Attachment 176665
As probably the most green and stumbling poster here, my thoughts exactly. The standard IDE does all I want, but I can see how someone adventurous might be attracted to it. Too cluttered for me... Obviously heaps of work though!Quote:
Originally Posted by SomeYguy
Just to clarify,
my favorite language is VB6 / VBA, I only find 4 faults in the IDE for quick programming
(my first parameter is to quickly test the project)
1) Undo limited to 20 (Ctrl Z)
2) No deletion of the execution window (debug.print debugging)
3) The touchpad is not recognized (lots of solutions that don't work)
4) IDE windows are difficult to tame
For the 1 the solution:
Search VBA6.dll with a Hexa editor for the Hexa string "83FB140F8743C1FCFF8B4D0C" and change the "14" to "7F".
For 2 and 3:
MZ Tool 8
For the 4:
Hope with ModernVB thanks to LinkFX
This does not prevent me from being interested in any IDE that will do better and more comfortable in a language close to VB6 and this is the case with VisualFreeBasic.
I started a small non-exhaustive comparison table:
main differences
VB6 ** VFB5
VB6 DIM a AS LONG,b AS LONG,c AS LONG,d AS LONG,e AS LONG
VFB5 DIM AS LONG a,b,c,d,e
VB6 DIM a AS LONG : a = 100
VFB5 DIM AS LONG a = 100
VB6 DIM a AS VARIANT : a = ARRAY("a","b","c","d","e")
VFB5 DIM a(4) AS STRING = {"a","b","c",d","e"}
VB6 DIM abcdefghijklmnop AS LONG : abcdefghijklmnop =10 : abcdefghijklmnop = abcdefghijklmnop +1
VFB5 DIM AS LONG abcdefghijklmnop = 10 : abcdefghijklmnop += 1
VB6 debug.print
VFB5 printa
Benefits VFB5
no plugin (everything is incorporated) :
Colors code
Multi Tabs
Intellisense
Mouse,touchpad compatibles
visual lines WITH, FOR, SELECT, CASE, etc.
Clearing / copying the execution window
Tool for create Tabs (number,name,position,img)
Tool for img/icon on tabs or others controls
Custom main Controls (completely virgin)
integrates all GDI, GDI + functions with Intellisense
Specifics controls :MultiShapes, Winhook,Trayicon,custom,Sqlite3,WinInet,Webbrowser,IPcontrol
Sqlite3 integrated
Compatible VB6 Code (90%) and C code
32 and 64 Bits
No installation
Tools provided :Spy,ControlSpy,fbedebugger,xdbg,depends,hash,compilers Freebasic
Lack VFB5
no interpreter, only compiler
no debugging (use external fbedebugger)
no code printing
no variant so no type mixing
no collections so no FOR EACH
1. Very useful recommendation for extending the Undo limit. I'll make that patch and include in future releases.
2. If you mean the immediate window clearing upon project launch, there's dozens of addins, including free ones that do this already.
3. Not sure what do you mean by touch pad. Do you mean touch screen? Or mouse wheel support? Tons of addins and external software for this also.
4. This was already implemented in ModernVB and is already available.
For my part, whatever can be fixed or improved upon via add-in or patches is something I'm willing to consider. Improvements to the language itself sadly would require a new compiler. I really don't understand why so many people set off to create brand new IDE drop-in replacements for VB instead of just writing a compatible compiler. Even an updated 64bit compiler that is compatible with VB6 syntax but doesn't support some of the more advanced, unorthodox features would be fine. It could also only be used for final compilation instead and leave the standard compiler for debugging, at the cost of some notable variation in compiled and debug versions.
It's really a huge shame this VFB5 project is written in Chinese rather than English. I'd love to contribute to it, but that's honestly a deal breaker.
For 1,I am not the authorQuote:
Originally Posted by LinkFX
http://www.vbforums.com/showthread.p...undos-in-VBIDE
For 2, it is the execution window at the bottom, if we use a debug.print in a loop of 1000, we find 1000 lines in this window difficult to read but more difficult to erase.
MZTool 8 has a very practical eraser for this function.
For the 3, it is the wheel which does not work in all windows (touchpad for my laptop), I tried 20 solutions, only MZTool 8 does not pose any problem.
how to use the C2.EXE compiler :
http://www.vbforums.com/showthread.p...spaces-release
For the compiler, the subject was raised 3 years ago by loquat :
http://www.vbforums.com/showthread.p...basic-language.
@loquat Is there anything new in China on C2.EXE ?
Translation is progressive
I contacted Yongfang the designer of VFB5 and he says that when he has solved all the problems,
everything will be translated into English, currently, there are already 2 possibilities:
Attachment 176673
I designed a small program which recovers all the Chinese words in the exe and which translates them to me, it works very well but the difficulty is the replacement of the bytes because on average it takes 2 times more bytes for English and 3 times for the French therefore truncated,so I prefer to wait complet translate.
Today, it can be used without problems, everything is functional.
What's the expected ETA on the English translation? If they set up a GitHub with the full code, and all text is in English both on the interface and source code, I'd gladly contribute.
I still feel like they're going the way way by reimplementing the IDE first instead of going towards a compiler and interpreter and simply reusing the VB6 IDE or hooking into something like VSCode with an external form designer plugin.
Unfortunately, I do not have much more information because it is xiaoyao who contacted me in February to confirm that the English version was to the program and actually gradually it was translated.Quote:
Originally Posted by LinkFX
He also gave me the number of the development group:
QQ group ID: 78458582
For my part, I subscribed to the QQ code which only allows me to download the program with each new version
but that did not allow me to join the group with the link communicated by xiaoyao.
https://jq.qq.com/?_wv=1027&k=5h3Lt1N
Only xiaoyao can help understand how to join the group and see their need for development.
Tried to contact him in MP
There is a GitHub but I don't believe there is a source.
I was able to communicate with the designer through the local forum
http://www.yfvb.com/soft-48.htm
VFB5: Dim As Long a, b, c, d, eQuote:
Originally Posted by camomille
I prefer: Dim a, b, a, d, e As Long
VFB5: DIM AS LONG a = 100
I prefer: Dim a As long = 100 Or Dim a = 100
VFB5: DIM a(4) AS STRING = {"a","b","c",d","e"}
I prefer: Dim a(4) As String = ["a","b","c",d","e"]
VFB5: DIM AS LONG abcdefghijklmnop = 10 : abcdefghijklmnop += 1
I prefer: Dim abcdefghijklmnop = 10: abcdefghijklmnop += 1
or: abcdefghijklmnop := 10: abcdefghijklmnop += 1
Golang variable declaration:
IMO, VFB's variable declaration is a bit weird, while Golang's variable declaration is very elegant.Code:(1) Complete declaration and assignment
var a int
a = 1
(2) Declare variable type and assign value
var a int = 1
var a, b int = 3, 4
var s, t string = "abc", "def"
(3) Do not declare type, determine when assigning value
var a = 1
var a, b, c, s = 3, 4, true, "def"
(4) Do not use the var keyword to declare variables, but to determine the type after assignment
a := 1
a, b, c, s := 3, 4, true, "def"
VFB5 allows 2 possibilities:Quote:
Originally Posted by dreammanor
DIM AS Long a, b, c, d, e or DIM a, b, c, d, e AS Long
But I'm not all experienced yet
vfb like vc++,not vb6。It's totally different.
You want to replace the IDe icon in VB6, which is simply to make the development tool cooler. If you really want to, the easiest way is to write a vb6 add-in。
You can write a brand new interface, just keep the code editor, and drag and drop control function of the form. Or use vfb to develop a code conversion tool, turn vb6 code into code, support 64-bit compilation, perfect multi-threading, etc., massive vc header files, code can be used (need to be converted into fb code ().
Science and technology have no national boundaries, and sometimes it is a joke. When the United States saw how fast Huawei's 5G communication technology was developing, it directly used the excuse that there were security problems, and then suppressed them with all its strength.The US also banned the sale of Huawei phones in the US. The battle between java and Microsoft.net has been a naked and malicious competition for many times. They are all at war, so the best VB6 development language is abandoned. If you support 64-bit and multi-threading, it is perfect.
powerbasic, freebasic, only implement the basic compiler, code editor, form designer, these functions have not yet completed 5%, very difficult to use. Just like the code editor that comes with Python is a notepad tool, it is completely useless.