Printable View
Quote:
Originally Posted by RhinoBull
How many lines do you have to get before the scrollbars appear? I didn't get any on that little test post.
@PG: How much quicker of a quick reply can you get? Are they just canned responses (Yes, No, flip the bird, etc.)? Will we be able to just think of an answer and have it posted.....better not, that would be bad.
Well, quick reply on 3.5 by default posts without reloading the page.
Woot! I like this new feature too. No more popups of confirmation of receipt when sending a PM (unchecked by default). :thumb:
haha i never understood thoes... it alway said "Ok & Cancel" didnt make sense...Quote:
Originally Posted by RobDog888
Line numbering is a bit annoying, especially when i copy code from VBF to VB it keeps the numbers (even though they aren't highlighted when your selecting the code).
Hmm, what browser? I'm using IE 7 and it doesnt select the line numbers and also doesnt copy them to the clipboard, but it does loose the linbe breaks so they all run together as a single line of code. :(
Copied/Pasted from Shaggies code post above.
vb Code:
Text selection is one of those areas that isn't very well standardised; particularly the selection of list markers, as in this case. Gecko copies the numbers; Trident doesn't. Neither is incorrect behaviour. The best way to avoid this is not to use lists where the formatting of the copied text is important; the line numbers should, ideally, be in a separate element.
Also, if the highlighting script is what it looks like (GeSHi), then you can enable the use of CSS classes instead of inline styles, which will cut down on a bit of bandwidth. The forum seems slower to me since the upgrade.
Another new feature...
How exactly is this supossed to work? I have read the thread as shown by it being purple and non-bolded but its in the unread section as designated by the red rectangle outlining. If I read it shouldnt it not be included in the New Posts query?
It shows to moderators.
Since you are a vB guru, doesnt this show incorrect?
Ps, I dont see the big secret about this feature.
Firefox, but thanks to a little greasemonkey script i've written its fixed now :)Quote:
Originally Posted by RobDog888
But just to show what it did before
Quote:
1.
Dim nv as NewVersion
2.
Dim complaints as Boolean
3.
4.
If nv Then
5.
complaints = True
6.
else
7.
complaints = True
8.
End if
9.
10.
Public Class NewVersion
11.
Inherits AnythingAtAll
12.
13.
private sn as SomethingNew
14.
End Class
My mistake, it shows to everyone, apparently; but I haven't seen it yet. I'm looking to see what triggers it.Quote:
Originally Posted by RobDog888
Can we please get the Rate this post text link back?
I don't really mind the fact that we need to use highlight=vb instead of vbcode tags from now on, but what about all those post that already exist that have the vbcode tags? They are now very hard to read.... But of course that can't be more than a few hundred thousand posts or something that now is very hard to read and learn from. :rolleyes:
Waaaaheeeey!
I found out we can finally rate posts in CC forums! YES! AT LAST!
On a bit of a negative note, there is no size option on the quick reply
I don't really think the CC forums should be rateable.
Sorry I meant rep.
Thanks, I sure was in a jam when it went missing.Quote:
Originally Posted by RobDog888
Oh, another issue: There used to be a popup window wherein we could rate a post, rather than having the page navigate us away from our thread. That popup was quite convenient. I'm sure Robo would agree. :afrog:
The popup was removed on accessibility grounds.
You'll notice once you rate the post, you are taken back to where you were.
What's the difference? They shouldn't use textbox at all! Period. It's annoying.Quote:
Originally Posted by Shaggy Hiker
Can someone explain something to me please?
Every time they did some upgrade we had major discusstion about the VBCODE tags. Right?
So, why do we have to go through this nonsense every time a patch or even bigger upgrade is applied? I don't get it! How is this possible?
I won't buy any replies unless it is resonable and well argumented.
Thank you.
Correct me if I'm wrong but VBCode tags feature required a modification of the original forums software, a hack. So whenever there was a new update, the forum software would have to be re-hacked to get the vbcode tags again.
This new way is better since we don't have to wait a new week for vbcode tags to be implemented, since the new tags are built into the software.
Again, correct me if i'm wrong :afrog:
Well it's still a "hack" in the strict sense of the word, but this version allows use of altered code in the form of "plugins" rather than altering files on the server. Much easier to handle, and to re-add after upgrades. Of course if there's variable names changed between versions (as there were in the last 2 major releases), then it needs adjusting.
I'll correct you... ;)Quote:
Originally Posted by kregg
You are correct - VBCode was a very poorly written and hard to apply hack to the forum software. It required direct modification to the underlying source code. It was a non-standard hack, and it only applied to this forum (out of the 30ish or so forums Jupitermedia runs).
The underlying software has now changed to avoid 'hacks' of the nature of VBCode. Rather, it uses an add-in concept that means adding it to the forum is easy (you can see that Highlight already works). The issue that didn't get addressed properly this time was the conversion of the VBCode information to the Highlight code tag. The developers doing the upgrade are working on this. In the future this won't (shouldn't) be an issue because we won't be changing from one tag to another, but rather it will be a simple matter of doing an upgrade and verifying an add-in.
This add-in will have benefits over the VBCode tag. For one, our forum manager will be able to customize the colors a little bit (not that we are going to be changing these once they are set). Additionally, and more importantly, the highlight tag works with more than just VB. We'll be able to color code java and other languages by changing the tag option value. (highlight=java).
So 24 hours of things not being quite perfect (which is less than the months of pain you'll go through when you upgrade a browser or operating system) is a small price to pay for some better features and a more secure site for all of us. (in my opinion).
I personally would like to thank those that have remained calm and polite during this upgrade. It is appreciated.
Brad!
I'm not sure what, but I'm missing something underneath the last post.
And maybe it has been here for ever, but since when are there restrictions for attachments? (or is that some kind of security patch?)
Good work on the smileys btw :p :D
:confused: What are you missing?Quote:
Originally Posted by TheBigB
The 1em-high dark blue bar.
What is up with the reputation points being spaced out like that?
(What are "breadcrumbs"? :confused: )
I already asked the same thing but no answers so far.Quote:
Originally Posted by SeanK
Eye exercise? :uhh:Quote:
Originally Posted by SeanK
The navigation trail:Quote:
Originally Posted by SeanK
VBForums > General > Forum Feedback
This issue is currently under investigation by JM.Quote:
Originally Posted by SeanK
So accessibility rules have been designed to avoid convenience?Quote:
Originally Posted by penagate
CC posts should not be rep'd and are not allowed still.Quote:
Originally Posted by kregg
Check your User CP. I've just rated you in "My favourite yoda !!" thread in CC.Quote:
Originally Posted by RobDog888
(that is genuine rating for your help in some other CC thread. you don't have to delete the rep. :))
VBCODE:
OK. Everyone know I like the line numbering feature. :D
But the non-transparent background and scrollbars are really annoying. :(
If there was a valid post for repping then the thread should have been more out of CC. After the main issues are fixed the CC Hack will be reaplied and CC Reps will be deleted. So please no one make any CC Reps as it will only make more work for the Admins. ;)
I know what you mean.... it kinda feels like something got cut off, or the page just sort of dropped off.Quote:
Originally Posted by TheBigB
Honestly, for the most part, I like the changes.... I now have to get used to saying "Please use [highlight=vb][/highlight] around your code" instead of the old-fashioned, shorter, easier to type way.
Not that I care that much about how the smilies look, the do look like a bunch of Mini-M&Ms decked out in pastels for Easter.
The only issue I've had since the upgrade has been that I feel like I spend a lot of time "waiting for bs.sysserv.info" .... or something like that.... I've had two timeouts and one eaten reply (good thing I could hit the back button and try again). in the last hour.
Other than that, this has been one of the smoothest upgrades.
-tg
As I said earlier, I'm pretty ok with the highlight=vb tag. However what will be done with all earlier posts that used the vbcode tag? The code in those (surely) several hundred of thousands of posts are now very hard to read. Are those posts going to be updated to use the new highlight tag?
Also, (this may have been pre-update; I haven't checked before) the RSS feed uses dtds.
http://msdn.microsoft.com/library/de...7fa5b7a8d6.asp
IE7 refuses to display it.
They will be updated, and this a priority.. but some extra time will be taken to ensure that the fix is fully correct, rather than rushed.Quote:
Originally Posted by Joacim Andersson
Issues:
- When uploading an avatar and then clicking Save, I get the message "Upload failed", although it didn't.
- Animated avatars aren't permitted now. New rule or a missed setting?
Suggestions:
- Map [Highlight=VB]...[/Highlight] to [highlight=vb]...[/highlight].
Tips for other members:
- If you want to demonstrate BB codes like I just did there, use the new [noparse]code here[/noparse] tag.
Yes the noparse tags are very nice and easy to use as compared to the older open/close tags.
Also will you be adding back the ability to delete your posts? I use it sometimes when i write an answer thats already similar to someone else (so i don't just say the same thing twice)
i dont think you can do it in ccQuote:
Originally Posted by penagate
really like this feature :P
edit:
and the new File Upload page ;)
Don't see what's the biggy about the seconds left. Do you really care? Feature was always available but without the "Please try in # seconds".
Quote:
Originally Posted by RobDog888
Ok, so the image didn't come across in the quote, but what is this thing? I have yet to see the bar with the "threads below this...." stuff.
Only checked these forums thoughQuote:
Originally Posted by penagate
Classic VB
Forum Feedback
General PC
But i can in CC
Out of curiosity, will there be a list of what languages will be available using [highlight=xxx][/highlight]? I found out on chance that highlight=sql works!
-tg
There's SO many that just pick a language, odds are it'll work
About the smilies:
it used to put space+smilie_name+space - IT :) WAS
now it trims the leading space sometext+smilie_name+space - IT:) IS NOW
I think it should always add leading and trailing spaces.
What the heck? I can no longer bold text in code.... I use bolding in vb code sometimes to stress a point or to point something out..... and now I can't!!! [sarcasm]How dare you foul beings, spawn of all that is arcane an evil!!! I curse you and the horse you rode in on..... ;) :P [/sarcasm]
Example:
vb Code:
-tg
When the upgrade issues settle down, ask this again. At that time, I'll see if I can get the complete list and add it to an FAQ on the site. That way people will know to type things like SQL instead of TSQL or PSQL :).Quote:
Originally Posted by techgnome
Brad!
If you want to do that, then you'll have to use the code tag instead of the highlight (vbcode) tag at this time. Sorry.Quote:
Originally Posted by techgnome
Brad!
OUCH! I guess I will be using the CODE tags only from now on - can't be bothered with "highlight=" thing - real pain. :rolleyes:Quote:
Originally Posted by techgnome
Can we have your "highlight=" and VBCODE tags back as well? Common really, that's unfair.
Any chance you could stop moaning too? :DQuote:
Originally Posted by RhinoBull
Sure there is. Might not be YOUR doing, but it can definitely be stopped.
The VBcode button now defaults to vb syntax highlighting, at least in quick reply. No need to add =vb any longer for vb highlighting. For other languages, those you must add
We still have to discuss how it should function with regular reply
I would still like to know if we will get the Rate this post text links back?
I just deleted my post that you quoted. Are you suuuuuuuuuuure you can't delete yours?Quote:
Originally Posted by Andrew G
Why? Is clicking an image instead of text is some kind of hardship?Quote:
Originally Posted by Joacim Andersson
Thank you so much for asking a question instead of answering... :rolleyes:Quote:
Originally Posted by JPnyc
But since you asked such an intelligent question (and at the same time make me feel like an idiot) I feel obligated to answer. No clicking on an image instead of a text is not hard, and if you would try it for yourself you will notice that your computer mouse don't even care what you click on. However, the mouse handling and clicking has nothing to do with it! The problem with the scale icon is that it's far from clear what it does, and you really have to look hard to even see that the icon represent a scale. While at the same time there is no question what a text link that clearly states Rate this post does.
So why don't you want us to get the text links back? Is there some kind of hardship returning them?