[RESOLVED] [VB6] - DIB's - Tiles an image

Hey long time no see :D

Ill do my best to help ya since I at work on my phone. I assume this stuff is part of your graphics class.

• If you want a tremendous boost in speed, I suggest you not use any calls to functions and subs in your main gameloop that are from a class module. The reason is cause it executes twice as slow than the same function and sub from a regular module.
• Another thing to boost your speed are conversions. If you are storing data in a variable thats a different data type, itll execute slower. So get ready to treat vb6 as "vb.net with option strict on" taking advange of CLng, CStr, Cint, CSng, etc.
• Also dont test your program in IDE mode. Test it as an exe. Youll notoce a huge speed boost.
• Another way to boost speed is to try your best to avoid using / operator unless you absolutely need it. If its being stored in a long or integer variable, use \ instead.
• Another way to boost speed is to avoid as many functions and sub calls as possible. Instead put all the code the function or sub had where the call was made. Doing this is known as Inlining, similar to adding an Inline statement prior to a function in C++. This will dramatically boost the speed of your program.
• In your project properties, you can remove a bunch of things in your compiler options that could potentially slow your program down such as overflow checks. And never compile it to pcode. Do native code instead.
• Error checking tremendously slows down your program. Worst of all, On Error Resume Next

I can go on and on about optimization techniques. But this will step you in the right direction.

Quote:

---

Originally Posted by Jacob Roman

Hey long time no see :D

Ill do my best to help ya since I at work on my phone. I assume this stuff is part of your graphics class.

• If you want a tremendous boost in speed, I suggest you not use any calls to functions and subs in your main gameloop that are from a class module. The reason is cause it executes twice as slow than the same function and sub from a regular module.
• Another thing to boost your speed are conversions. If you are storing data in a variable thats a different data type, itll execute slower. So get ready to treat vb6 as "vb.net with option strict on" taking advange of CLng, CStr, Cint, CSng, etc.
• Also dont test your program in IDE mode. Test it as an exe. Youll notoce a huge speed boost.
• Another way to boost speed is to try your best to avoid using / operator unless you absolutely need it. If its being stored in a long or integer variable, use \ instead.
• Another way to boost speed is to avoid as many functions and sub calls as possible. Instead put all the code the function or sub had where the call was made. Doing this is known as Inlining, similar to adding an Inline statement prior to a function in C++. This will dramatically boost the speed of your program.
• In your project properties, you can remove a bunch of things in your compiler options that could potentially slow your program down such as overflow checks. And never compile it to pcode. Do native code instead.
• Error checking tremendously slows down your program. Worst of all, On Error Resume Next

I can go on and on about optimization techniques. But this will step you in the right direction.

---

hi friend;)
thanks for the tips;)

Code:

---

If Draw = DrawWayTiles Then
        lngTilesX = outWidth
        Do While lntTileLimitX >= lngTilesX
            BitBlt DoubleBuffer.handleDC, lngTilesX, 0, lngTilesX, outWidth, DoubleBuffer.handleDC, 0, 0, vbSrcCopy
            lngTilesX = lngTilesX * 2
            Debug.Print "original size: " & outWidth & "  Controlsize: " & lntTileLimitX & " actual position:  " & lngTilesX
        Loop
    End If

---

but can you help me fix these code?
by debug seems that i have the right positions, but the bitblt() don't draw me the image:(
and i recive '1' in biblt(), that seems working... so what i miss?

Well after looking at your code, I believe the if statement needs swapped just so it makes more sense:

lngTilesX <= lntTileLimitX

Also its better you use a For Loop rather than the Do Loop to draw out the tiles. They both practically execute the same speed. And I'm not so sure about this:

lngTilesX = lngTilesX * 2

Lets say you start the outwidth at 1, and your lntTileLimitX at 10. Since you are storing outwidth in lngTilesX, it now has 1. Then when you run the loop, this is whats happening to lngTilesX:

1) 1
2) 2
3) 4
4) 8
5) 16
6) 32
7) 64
8) 128
9) 256
10) 512

It just doesn't make any sense because all its doing is going further and further and further away (is this what you are after?). What would make sense if you are making a tile engine is lngTilesX = lngTilesX + outwidth, assuming outwidth is the tile width. because then your values would be this, assuming the tile width is 15:

1) 0
2) 15
3) 30
4) 45
5) 60
6) 75
7) 90
8) 105
9) 120
10) 135

And it would all be together. However there is a much better way of drawing tiles. I practically invented a way of doing it to where you can draw worlds as massive as you want with zero slowdown, similar to World of Warcraft or Grand Theft Auto sized worlds, only in 2D. If you need some code on how to do this, I'm more than willing to offer it to you. ;)

As for BitBlt, is the Double_Buffer from memory or is it a picturebox? If its a picturebox, set the AutoRedraw to True. And you made your destination of where its to be drawn is drawing in the Double_Buffer again. I don't think the source and destination should be the same DC.

now works fine.. thanks.

Code:

---

Public Sub DrawImage(Picture As Object, Optional X As Long = 0, Optional Y As Long = 0, Optional Width As Long = 0, Optional Height As Long = 0, Optional Draw As DrawWay = DrawWayNormal)
    Dim lngTilesX As Long
    Dim lngTilesY As Long
    Dim lntTileLimitX As Long
    Dim lntTileLimitY As Long
   
    Call ChangeImage
   
    If Draw = DrawWayStretch Then
        Width = Picture.ScaleWidth
        Height = Picture.ScaleHeight
    ElseIf Draw = DrawWayNormal Then
        Width = outWidth
        Height = outHeight
    ElseIf Draw = DrawWayTiles Then
        Width = outWidth
        Height = outHeight
        lntTileLimitX = Picture.ScaleWidth
        lntTileLimitY = Picture.ScaleHeight
    End If
   
    With bi32BitInfo.bmiHeader
        .biBitCount = 32
        .biPlanes = 1
        .biSize = Len(bi32BitInfo.bmiHeader)
        .biWidth = outWidth
        .biHeight = outHeight
        .biSizeImage = 4 * outWidth * outHeight
    End With
 
    'create a DC
    Dim DoubleBuffer As DC
   
    DoubleBuffer.handleDC = CreateCompatibleDC(Picture.hdc)
   
    If Draw = DrawWayTiles Then
        DoubleBuffer.handleBMP = CreateCompatibleBitmap(Picture.hdc, Picture.ScaleWidth, Picture.ScaleHeight)
    Else
        DoubleBuffer.handleBMP = CreateCompatibleBitmap(Picture.hdc, Width, Height)
    End If
   
    DoubleBuffer.handleRefBMP = SelectObject(DoubleBuffer.handleDC, DoubleBuffer.handleBMP)
     
   
    If msMirrorState = None Then
        StretchDIBits DoubleBuffer.handleDC, 0, 0, Width, Height, 0, 0, _
            outWidth, outHeight, ChangedImage(0, 0), bi32BitInfo, 0, vbSrcCopy
    ElseIf msMirrorState = Vertical Then
        StretchDIBits DoubleBuffer.handleDC, 0, Height, Width, -Height, 0, 0, _
            outWidth, outHeight, ChangedImage(0, 0), bi32BitInfo, 0, vbSrcCopy
    ElseIf msMirrorState = Horizontal Then
        StretchDIBits DoubleBuffer.handleDC, Width, 0, -Width, Height, 0, 0, _
            outWidth, outHeight, ChangedImage(0, 0), bi32BitInfo, 0, vbSrcCopy
    ElseIf msMirrorState = HorizontalVertical Then
        StretchDIBits DoubleBuffer.handleDC, Width, Height, -Width, -Height, 0, 0, _
            outWidth, outHeight, ChangedImage(0, 0), bi32BitInfo, 0, vbSrcCopy
    End If
   
    If Draw = DrawWayTiles Then
        For lngTilesX = outWidth To lntTileLimitX
            BitBlt DoubleBuffer.handleDC, lngTilesX, 0, lngTilesX, outHeight, DoubleBuffer.handleDC, 0, 0, vbSrcCopy
            lngTilesX = (lngTilesX * 2) - 1
        Next
       
        For lngTilesY = outHeight To lntTileLimitY
            BitBlt DoubleBuffer.handleDC, 0, lngTilesY, lntTileLimitX, lngTilesY, DoubleBuffer.handleDC, 0, 0, vbSrcCopy
            lngTilesY = (lngTilesY * 2) - 1
        Next
    End If
       
   
    If blnTransparent = True Then
        If Draw = DrawWayTiles Then
            TransparentBlt Picture.hdc, X, Y, lntTileLimitX, lntTileLimitY, DoubleBuffer.handleDC, 0, 0, lntTileLimitX, lntTileLimitY, lngBackColor
        Else
            TransparentBlt Picture.hdc, X, Y, Width, Height, DoubleBuffer.handleDC, 0, 0, Width, Height, lngBackColor
        End If
    Else
        If Draw = DrawWayTiles Then
            BitBlt Picture.hdc, X, Y, lntTileLimitX, lntTileLimitY, DoubleBuffer.handleDC, 0, 0, vbSrcCopy
        Else
            BitBlt Picture.hdc, X, Y, Width, Height, DoubleBuffer.handleDC, 0, 0, vbSrcCopy
        End If
    End If
   
    'delete a DC
    DeleteObject SelectObject(DoubleBuffer.handleDC, DoubleBuffer.handleRefBMP)
    DeleteObject DoubleBuffer.handleBMP
    DeleteDC DoubleBuffer.handleDC
End Sub

---

i did several errors, but now works. the speed still not be the best. but i think i know why... i have tested and now i know that i need more speed on my FileName property. but, for now, it's cool;)
thanks for all