moving a Line Control in circualr motion

how do i move a Line control ( Line1 ) in circualr motion so that it can move circulary ( in Clockwise direction )?
thanks

I think that will help you
GO here

I did not write this code but found it on the web when I was wanting to do something similar.

Hope it helps

add two lines a command button and a timer with the interval set to 100.

Option Explicit

Private Const D_THETA = 3.14159265 / 12
Private Theta As Single
Private R1 As Single
Private R2 As Single
Private Cx1 As Single
Private Cy1 As Single
Private Cx2 As Single
Private Cy2 As Single

Private Sub Command1_Click()
Timer1.Enabled = Not Timer1.Enabled
If Timer1.Enabled Then
Command1.Caption = "Stop"
Else
Command1.Caption = "Start"
End If
End Sub


Private Sub Form_Load()
Dim dx As Single
Dim dy As Single

dx = Line1.X2 - Line1.X1
dy = Line1.Y2 - Line1.Y1
R1 = Sqr(dx * dx + dy * dy)
Cx1 = Line1.X1
Cy1 = Line1.Y1

dx = Line2.X2 - Line2.X1
dy = Line2.Y2 - Line2.Y1
R2 = Sqr(dx * dx + dy * dy) / 2
Cx2 = (Line2.X1 + Line2.X2) / 2
Cy2 = (Line2.Y1 + Line2.Y2) / 2
End Sub

Private Sub Timer1_Timer()
Theta = Theta + D_THETA

Line1.X2 = Cx1 + Cos(Theta) * R1
Line1.Y2 = Cy1 + Sin(Theta) * R1

Line2.X1 = Cx2 + Cos(Theta) * R2
Line2.Y1 = Cy2 + Sin(Theta) * R2
Line2.X2 = Cx2 - Cos(Theta) * R2
Line2.Y2 = Cy2 - Sin(Theta) * R2
End Sub

Rab.

I worte this code
Add a timer ( Timer1 )

Code:

---


Const pi = 3.1415926
Private Sub Form_Load()
    Timer1.Interval = 100
End Sub
Private Sub Timer1_Timer()
Form1.Cls
r = 2500
'seconds
sec = Second(Time)
Form1.PSet (4000, 3000), white
Form1.Line (4000, 3000)-(Sin((180 - sec * 6) * pi / 180) * r + 4000, _
            Cos((180 - sec * 6) * pi / 180) * r + 3000)
'minutes
Min = Minute(Time)
Form1.Line (4000, 3000)-(Sin((180 - Min * 6) * pi / 180) * (r - 280) + 4000, _
            Cos((180 - Min * 6) * pi / 180) * (r - 280) + 3000)
'hours
hour_ = Hour(Time)
Form1.Line (4000, 3000)-(Sin((180 - hour_ * 30) * pi / 180) * (r - 1000) + 4000, _
            Cos((180 - hour_ * 30) * pi / 180) * (r - 1000) + 3000)
Form1.Circle (4000, 3000), 2550
Caption = Time
End Sub

---

does anyone have better code :cool:

Whether or not this is better is left up to the viewer, but I do think it's cleaner. After I dug around a little, I found the thing where I messed with this and stripped it down to the part in question. You will need to place 3 line controls on the form as part of an array named linClock and a timer control named tmrClock. The rest is handled by the code. I wrote the UpdateHands() procedure in such a way that you could override the current time and give it your own values for H/M/S.

VB Code:

Option Explicit
 
Private Const dblPi As Double = 3.14159265358979
Private Const dblNoonOffset As Double = -1.5707963267949 '-pi/2, the angle of "noon" (needed to skew VBs reference frame)
Private Const dblHSeg As Double = 0.523598775598298 '2pi/12, an arc of one hour, 1/12 of a circle
Private Const dblMSSeg As Double = 0.10471975511966 '2pi/60, an arc of 1 min or sec, 1/60 of a circle
Private Const dblLength As Double = 50 'length of the hands in pixels
 
Private Enum EClockHands
   chSec = 0
   chMin
   chHour
End Enum
 
Private Sub Form_Load()
   Dim i As Double
   Me.ScaleMode = vbPixels
   Me.AutoRedraw = True
   Me.DrawWidth = 2
   'simple clock face drawing
   Me.Circle (100, 100), 55, vbWhite
   For i = 0 To (2 * dblPi) Step dblHSeg
      Me.PSet (100 + (dblLength * Cos(i)), 100 + (dblLength * Sin(i))), vbBlack
   Next i
   Me.Refresh
   For i = EClockHands.chSec To EClockHands.chHour
      With linClock(i)
         'all hands are the same length, but that's not necessary
         'endpoint (x1,y1) is fixed, (x2,y2) rotates
         .X1 = 100: .Y1 = 100
         .X2 = .X1: .Y2 = .Y1 + dblLength
      End With
   Next i
   linClock(EClockHands.chSec).BorderColor = vbRed
   linClock(EClockHands.chMin).BorderColor = vbBlack
   linClock(EClockHands.chHour).BorderColor = vbBlue
   tmrClock.Interval = 1000
   tmrClock.Enabled = True
   UpdateHands
   Me.Show
End Sub
 
Private Sub tmrClock_Timer()
   UpdateHands
End Sub
 
Private Sub UpdateHands(Optional ByVal blnUseCurrentTime As Boolean = True, Optional ByVal intHour As Integer = 0, Optional ByVal intMin As Integer = 0, Optional ByVal intSec As Integer = 0)
   Dim dblH As Double, dblM As Double, dblS As Double
   If blnUseCurrentTime Then
      intHour = Hour(Now)
      intMin = Minute(Now)
      intSec = Second(Now)
   End If
   'calculate the angles of the hands
   dblS = dblNoonOffset + (intSec * dblMSSeg)
   dblM = dblNoonOffset + (intMin * dblMSSeg)
   'the last term of the next calculation fudges the hour hand moving through the hour instead of going from hour to hour in a single jump
   dblH = dblNoonOffset + (intHour * dblHSeg) + ((intMin / 12) * dblMSSeg)
   With linClock(EClockHands.chHour)
      .X2 = .X1 + (dblLength * Cos(dblH))
      .Y2 = .Y1 + (dblLength * Sin(dblH))
   End With
   With linClock(EClockHands.chMin)
      .X2 = .X1 + (dblLength * Cos(dblM))
      .Y2 = .Y1 + (dblLength * Sin(dblM))
   End With
   With linClock(EClockHands.chSec)
      .X2 = .X1 + (dblLength * Cos(dblS))
      .Y2 = .Y1 + (dblLength * Sin(dblS))
   End With
   Me.Caption = Format$(Time$, "Long Time")
End Sub