Printing Textbox Text

I have some text in a multiline textbox that I want to print (nothing fancy). I was using this code, which works, but it doesn't wrap the text. What do I need to do to wrap the text so that it all fits onto the page? Thanks!

Code:

---

    Printer.Print Text1.Text
    Printer.Font = "Arial"
    Printer.EndDoc

---

*bump because I want to know the answer also*

Do you mean it's going off the bottom or off the right side of the page?

Technically it should print within the margins of the page without a problem, so maybe you could give an example of the text you have in the text box.

It is going off the right side of the page.

I have text that is broken into 5-6 paragraphs. At each paragraph (vbcrlf) it drops down a line and I can see all the text until it again goes off the page (at about 155-160 characters).

I just added some very rough code that divides things up into 150 character chunks, but it breaks up words and everything.

I was sure that I saw some very simple code that did this somewhere, but I can't find it anywhere.

If you can switch to a richtext box instead, this module does a pretty good job of printing. I wish I could give credit to who wrote it, but I don't remember where I got it.

Quote:

---

Originally posted by MarkT
If you can switch to a richtext box instead, ......

---

Attached is a HowTo that describes WYSIWYG for a RichTextBox control, Complete with Code for the BAS and a Project.

-Lou

Here you go:

VB Code:

Private Declare Function DrawText Lib "user32" Alias "DrawTextA" (ByVal hdc As Long, ByVal lpStr As String, ByVal nCount As Long, lpRect As RECT, ByVal wFormat As Long) As Long
Private Type RECT
    Left As Long
    Top As Long
    Right As Long
    Bottom As Long
End Type
Private Const DT_WORDBREAK = &H10
Private Const DT_CALCRECT = &H400
 
Public Sub PrintWrapText(p_strText As String)
    Dim lngOldTop As Long
    Dim rec As RECT
    
    
    lngOldTop = Printer.CurrentY
    'we have to start the printer to get back the hDC
    Printer.Print
    With Printer
        .CurrentY = lngOldTop
        .ScaleMode = vbPixels
        rec.Left = .CurrentX
        rec.Right = .CurrentX + .Width
        rec.Top = .CurrentY
        'get the height of the text
        DrawText .hdc, p_strText, Len(p_strText), rec, DT_WORDBREAK + DT_CALCRECT
        'draw the text to the hDC of the printer
        DrawText .hdc, p_strText, Len(p_strText), rec, DT_WORDBREAK
        .EndDoc
    End With
End Sub

Call this sub routine like
Call PrintWrapText(Text1.Text)

Serge,

I'm not sure, but I don't think it works.

I thought the Object of the question was to print the text in
a textbox to a printer as it appears in the textbox.

I tried your code, and It seems to be just wrapping the text to a next line when it meets the boundary of the page.

Hmm, How'd it work for everybody else.

:confused:
-Lou

I though that was the idea to wrap long text :

Quote:

---

Originally posted by overhill
I have some text in a multiline textbox that I want to print (nothing fancy). I was using this code, which works, but it doesn't wrap the text. What do I need to do to wrap the text so that it all fits onto the page? Thanks!

Code:

---

    Printer.Print Text1.Text
    Printer.Font = "Arial"
    Printer.EndDoc

---

---

Quote:

---

Originally posted by Serge
I though that was the idea to wrap long text :

---

And it is.

I could get NotLKH's to work fine, but would rather not have to change to the RichTextBox control.

Serge's code doesn't seem to change the way things print at all. Seems odd.

Hi
Here is a simple way to wrap text. Uses string concatenation so may not be fastest but since u are using a printer i doubt it matters. First tests if sentences fit on line. If so, it prints them. If not it tests each word of sentence to see if it fits. Assumes left aligned whole word wrap
Regards
Stuart

VB Code:

Private Sub Command1_Click()
    lstrsentences = Split(Text1.Text, vbCrLf)
    lintprinterwidth = Printer.ScaleWidth
    For Counter = 0 To UBound(lstrsentences)
        If Printer.TextWidth(lstrsentences(Counter)) > lintprinterwidth Then
            lstrWords = Split(lstrsentences(Counter), " ")
            lstrresult = ""
            lintusedwidth = 0
            For lintcounter = 0 To UBound(lstrWords)
                lintusedwidth = lintusedwidth + Printer.TextWidth(lstrWords(lintcounter) & " ")
                If lintusedwidth > lintprinterwidth Then
                    Printer.Print lstrresult
                    lintusedwidth = 0
                    lstrresult = ""
                Else
                    lstrresult = lstrresult & lstrWords(lintcounter) & " "
                End If
            Next
            Printer.Print lstrresult
        Else
            Printer.Print lstrsentences(Counter)
        End If
    Next
    Printer.EndDoc
End Sub

And as a sample

VB Code:

Private Sub Form_Load()
    Text1.Text = "This is the first line." & vbCrLf
    Text1.Text = Text1.Text & "This is the second line. A bit longer but it wraps" & vbCrLf
    Text1.Text = Text1.Text & "This is the third line."
End Sub

Alright,here you go.

I played around a little setting printer.CurrentX for a left margin and printer.CurrentY for line spaceing, {you should figure this part out for yourself, since I have no Idea where you want this to be printed on a page}. This gets the text of each
line in a MultiLine TextBox, and prints it to the printer.
Unfortunately, beachbum's code obviously keys off of Carraige Returns/LineFeeds, but as we all know, in a multiline textbox, they aren't automatically placed. It Just reflows to the next line. But this, I think, is what you want. A printOut of Every Individual Line as it lays in your textbox.

So, Try Something Like this:

Code:

---

Private Declare Function SendMessage Lib "user32" Alias "SendMessageA" (ByVal hwnd As Long, ByVal wMsg As Long, ByVal wParam As Long, lParam As Any) As Long
Private Declare Sub CopyMemory Lib "kernel32.dll" Alias "RtlMoveMemory" (Destination As Any, Source As Any, ByVal Length As Long)
Private Const EM_GETLINECOUNT = &HBA
Private Const EM_GETLINE = &HC4
Private Const EM_LINEINDEX = &HBB
Private Const EM_LINELENGTH = &HC1

Private Sub Command1_Click()
Dim Num_Lines As Long
Dim linetextlen As Integer
Dim linetext As String
Dim retval As Long
Dim My_Y As Long
Dim MyOldY As Long
Printer.CurrentX = 1000
Printer.CurrentY = 1000

Printer.FontName = Text1.FontName
Printer.FontSize = Text1.FontSize
Num_Lines = SendMessage(Text1.hwnd, EM_GETLINECOUNT, 0&, ByVal 0&)
For I = 0 To Num_Lines - 1
    MyOldY = Printer.CurrentY
    charindex = SendMessage(Text1.hwnd, EM_LINEINDEX, ByVal CLng(I), ByVal CLng(0))
    linetextlen = SendMessage(Text1.hwnd, EM_LINELENGTH, ByVal charindex, ByVal CLng(0))
    linetext = Space(IIf(linetextlen >= 2, linetextlen, 2))
    CopyMemory ByVal linetext, linetextlen, Len(linetextlen)
    retval = SendMessage(Text1.hwnd, EM_GETLINE, ByVal CLng(I), ByVal linetext)
    If linetextlen < 2 Then linetext = Left(linetext, linetextlen)
    Printer.Print linetext
    Printer.CurrentY = MyOldY + Printer.TextHeight(linetext) * 1.5
    Printer.CurrentX = 1000
Next I
Printer.EndDoc
End Sub

---

It gets the number of individual lines in a textbox, then it gets each individual line, and the prints each one.


:D :D :D
-Hope this helps
-Lou

Quote:

---

Originally posted by NotLKH

Unfortunately, beachbum's code obviously keys off of Carraige Returns/LineFeeds, but as we all know, in a multiline textbox, they aren't automatically placed. It Just reflows to the next line. But this, I think, is what you want. Lou

---

:o LOL... Lou. When u key data into a multi line textbox and press the enter key the vbcrlf is put into the text. If u simply wrap the sentence a vbcrlf wont be put in. But my code accounts for both. Change Printer to Picture1 remove EndDoc and try it.
Regards
Stuart

Stuart,

Well, Again, I'm not sure this is what is intended. You'll see an attached image of The output, and the text inside a textbox, and as seen, the textbox text wraps, but the code produced unwrapped lines.

:(
-Lou

http://www.vbforums.com/attachment.p...achmentid=4364

But, The more I reread his original post, The more I'm convinced that You Just Might be giving him what he wants. He doesn't say anything about matching the flow as it appears in the textbox, just that it goes off the page.


Well, Stuart, anyways, I neglected to say,

"Good Code!"

Well, he's now got ample code, Mine, that match the text box flow, and yours, that keeps it on the page, and Also Serge's.
Plus A couple of RichText Codes.

One of these must be something he can use!

:D
-Lou

LOL Lou
U just posted before i got a chance to answer. Was just gonna say that original poster had wanted to fit it on a printed page. So with this abundance of riches he is no doubt more confused than ever... another job well done i say :p Give us any qtn and we can make u wish u took up milk delivery as a job :p
Cheers Lou :)

It's not even my post, and i'm confused!

So did we actually create code to print the long line of text in the text box? Without it going off the printed page?

This is the way I used to split long lines using plain text:
I used the Printer.TextLength property to check if each line of text is longer than 180 mm, then substract the last word and print the line:

Code:

---

Dim MyPhrase  As String
Dim Phrase(100)  As String
Dim MyText As String
Dim lin, pal As String
Dim m, p, q, k As Integer

Printer.Scale (0, 0)-(200, 280)
'This scale is in millimeters and works well for an A4 sheet

MyText = Text1.Text
    p = InStr(MyText, vbCrLf)
    q = 1
    k = 1
While p

'Here I split the text into Phrases, by means of vbCrLf:
    If p Then
        Phrase(k) = Left(MyText, p - 1)
        MyText = Right(MyText, Len(MyText) - p - 1)
    End If
    p = InStr(MyText, vbCrLf)
    k = k + 1
Wend
'This is the LAST Phrase -whatever is left after splitting:
Phrase(k) = MyText

'Now, for each individual Phrase, I form LINES (lin) of a given length:
'In this case I selected 180 mm
'Each lin is formed wy several WORDS (pal) until it reaches the length I choosed
For m = 1 To k
p = InStr(Phrase(m), " ")
  While p
    pal = Left(Phrase(m), p)
    Phrase(m) = Right(Phrase(m), Len(Phrase(m)) - p)
        If Printer.TextWidth(lin & pal) > 180 Then
            Printer.CurrentX = 20
            Printer.Print lin
            lin = ""
        End If
    lin = lin & pal
    p = InStr(Phrase(m), " ")
  Wend
Printer.CurrentX = 20
Printer.Print lin & Phrase(m)
lin = ""
'I clear lin for the next cycle
Next m
Printer.EndDoc

---

Hope it helps!

Damn! Now he knows ALL the secrets!
Juan! Why'dja do it?
Now hes as good as us!!!

:D :D :D

I gotta start keeping a list of Raab awards for digging up old threads. Going on my poor memory I think that Juan is the 13th daily winner. Congrats!!! Balloons, streamers etc :D

We could do better. Hey, Beach? {stuart}, Lets dig up one of your oldie moldies?

All of my posts are pure class Lou.... (hope that puts him off the trail!! :p)

Mine are like this
50%: Hey u friggin goober, what the hell u talkin about?
24%: Can anyone find my keys?
15%: My head hurts, no more beer
27%: I am not so good at maths :D

Just a thought Lou you could always pull up that compiler / decompiler / encrypter / decrypter thread in a few more months if u need somewhere to spit your coffee :D

Errrrr, whaaa?

Is that one of Mine or one of Yours?

Mind you, I had just pulled up your threads before you so rudely BEEBOOO'ed {sound of Incoming mail} me back to here.

:D :D :D

sorry
forgot u are old and have no memory!! :D :D

http://www.vbforums.com/showthread.p...hreadid=118835
and
http://www.vbforums.com/showthread.p...ghlight=stuart

Dragged up per request!

:D

It's threads like this one that make me love VB World so much!

Use this:

<vbcode>
Private Sub TBPrintWrap(ByVal Text As String, ByVal LtMar As Long, ByVal RtMar As Long)
Dim I As Integer
Dim j As Integer
Dim currWord As String


Printer.CurrentX = LtMar
I = 1

Do Until I > Len(Text)
currWord = ""
Do Until I > Len(Text) Or Mid$(Text, I, 1) <= " "

currWord = currWord & Mid$(Text, I, 1)

I = I + 1
Loop

If (Printer.CurrentX + Printer.TextWidth(currWord)) > (Printer.ScaleWidth - RtMar + Printer.ScaleLeft) Then

Printer.Print
Printer.CurrentX = LtMar

End If

Printer.Print currWord;
Do Until I > Len(Text) Or Mid$(Text, I, 1) > " "

Select Case Mid$(Text, I, 1)

Case " "
Printer.Print " ";

Case Chr$(10) 'LF

Printer.Print

Printer.CurrentX = LtMar

Case Chr$(9) 'Tab

j = (Printer.CurrentX) / Printer.TextWidth("0")

j = j + (10 - (j Mod 10))

Printer.CurrentX = (j * Printer.TextWidth("0"))

Case Else

End Select

I = I + 1

Loop

Loop

End Sub

'---------------

next, within the print event (printer click button or menu print option), include the code:

'other printer stuff

Printer.CurrentY = 8400 ' 8400 twips down from top of page..
TBPrintWrap txtProcess.Text, 1100, 1100 ' X location, for both margins, assumed equal

'other stuff

Printer.EndDoc ' start printing
</vbcode>

thread reviv0rz :P

Quote:

---

Originally posted by mikeycorn
It's threads like this one that make me love VB World so much!

---

I know exactly what you mean! Same here ! :)