Two time thresholds are supposed to trigger two distinct actions without simultaneity

Dear gentlemen,

I have been designing some app with VS2005 C#.
I intend to compare two distinct time thresholds designated 'pulltime' and 'releasetime' with current time picked up from the device the app is deployed and run.
Once the app is launched the user is intended to input two distinct time thresholds: 'pulltime' and 'releasetime' into two textboxes.
Once upon certain button on the form is hit timer begins to compare recent time picked from the device every 1000 ms.
When the 'pulltime' threshold is reached, certain coil should be pulled up, as timer ticks away the 2nd threshold 'releasetime' is approaching, thus when reached the same coil should be released.
The app operates without throwing exceptions, first off when the 'pulltime' is reached it pulls coil, but when 'releasetime' is reached it initially releases coil but in a second pulls it up again.
To give you an idea what I am trying to accomplish I add some code below:

First off I input 'pulltime' and 'releasetime' in the two textboxes as the strings:

string pulltime=TextBox1.Text; // input 'pulltime' as string
DateTime pulltime1=DateTime.Parse(pulltime); //convert string into date time
string releasetime=TextBox2.Text; //input 'releasetime' as string
DateTime releasetime1=DateTime.Parse(releasetime); //convert string into date time

The code below stands for pick up recent date time of the device on which app is run, extracts only time from DateTime
object, converts it into the string to display on the form, and then converts it into Date Time object again:

DateTime dt=DateTime.Now; //pick up recent date time of the board each 1000 ms
string dt1=dt.TimeOfDay.ToString(); //extracts only time, converts into string to display on the form
DateTime dt2=DateTime.Parse(dt1); //converts the string into date time object to compare with lower and time upper
//thresholds

the 3rd section of the code below is to compare recent time of the device with pulltime1 and releasetime1 thresholds

Int32 result=DateTime.Compare(pulltime1, dt2); //before dt2 reaches pulltime1 the value is 1, from the moment it has
//reached its value is -1
Int32 result1=DateTime.Compare(releasetime1, dt2); //before dt2 reaches releasetime1 the value is 1, from the
//moment it has reached its value is -1

When code runs on the device first off the lower threshold is reached the coil pulls up, time runs to the upper threshold
and upon it is reached the coil is released, then in one second is pulled up again and begins cycling around pulled and
released actions, until I deliberately cease the application.

Could you please take me into understanding, how this simultaneity of the actions could be avoided?
How to enhance this code, to make it perform only once pull up coil action when the lower threshold is reached, and only once release coil action when the upper threshold is reached?

Faithfully,
N.Kv.

You should keep track of whether the actions have been performed yet, using a boolean variable (eg: bool pullDone = false), and mark it as done when it is. When checking if the time has been reached, also check if the action has already been done - if it has, don't do it again.

Why not use two separate Timers that are set to Tick and the precise time you want the two actions to be performed? The Timers won't be exact to the millisecond, so it depends how accurate you need to be. I'd also suggest using DateTimePicker controls rather than TextBoxes, assuming this is WinForms. There's no validation or conversion necessary then.

Thank you sir, I'll give it a good shot!

Yes sir, the app uses two timers, when lower threshold is reached, the 1st timer disables itself and enables the second timer. When the upper threshold is reached, the 2nd timer disables itself and enables the 1st, this leads to the pull-release cycling. Because both conditions are fulfilled! It begins to pull up and release simultaneously! What I intend is the conditions to pull and release must mutually exclude each other, but now they are concurrent conditions, which contend to re-gain control over the thread!

Quote:

---

Originally Posted by nikoloz

Yes sir, the app uses two timers, when lower threshold is reached, the 1st timer disables itself and enables the second timer. When the upper threshold is reached, the 2nd timer disables itself and enables the 1st

---

If you're going to do it that way then it's pointless using two Timers. You may as well just use one and use a Boolean flag to indicate what gets done on the Tick. What I meant was one Timer per action, i.e. one to pull and one to release. They are both active all the time and they are set to Tick at the precise moment you want the action to occur. The first one Ticks at the pull time and pulls while the second Ticks at the release time and releases. No conflict.

You could even use a single Timer for this and either an Enum or a Boolean to indicate the action to perform. You could set the Interval so it Ticks at the puul time and then pulls, then toggle to flag that indicates the action to perform and reset the Interval to Tick at the release time.