WIndows form Add new record with code

I have a form that everything works on except adding records when called from another form. I am trying to add with the bindingsource.addnew. Which I like because it doesn't save until they hit the save button. This is what I have but I read it doesn't work. The bindingsource addnew only creates a detached record so this wont work.

Code:

---

        If Application.OpenForms().OfType(Of OperShiftLog).Any _
        Or Application.OpenForms().OfType(Of OperShiftLog1).Any Then
            Me.Laser_Status_InfoBindingSource.Filter = "Printer = '" & Pass_Printer & "'"
            If Pass_AddMod = "M" Then
                BindingNavigatorDeleteItem.Enabled = False
                BindingNavigatorAddNewItem.Enabled = False
                Me.Laser_Status_InfoBindingSource.Filter = "Shift_FKey = '" & Pass_Shift_Key & "' AND Printer = '" & Pass_Printer & "'"
            Else
                Add_New = True
                Me.Laser_Status_InfoBindingSource.AddNew()
                tbStatus_key.Text = Int32.MaxValue
                tbShift_FKey.Text = Pass_Shift_Key
                chkbSerReq.Checked = False
                tbSvcReq.Text = ""
                tbMeter.Text = 0
                cmbStatus.Text = "Up"
                dtpErr_time.Value = DateTime.Now
                cmbPrinter.SelectedValue = Pass_Printer
                cmbOperator.SelectedValue = Pass_Operator
                cmbStatus.Focus()
                'Save_Current()
            End If
            cmbSelPrinter.Visible = False
            '.visible = False
            chkbActiveSel.Visible = False
            'cmbSelPrinter.SelectedValue = Pass_Printer
            'cmbSelPrinter.Enabled = False
            'chkbActiveSel.Enabled = False
            cmbPrinter.Enabled = False
            cmbOperator.Enabled = False
            dgvLaser_Status_Info.Enabled = False
        Else
            Me.Laser_Status_InfoBindingSource.Filter = "Printer = '" & cmbSelPrinter.SelectedValue & "'"
            Me.Laser_Status_InfoBindingSource.Sort = "Err_Time"
            Me.Laser_Status_InfoBindingSource.MoveLast()

            chkbActiveSel.Checked = True
            fillSelPrinter()
        End If

---

Quote:

---

Originally Posted by wjburke2

The bindingsource addnew only creates a detached record

---

With a DataTable bound to a BindingSource, calling AddNew on the BindingSource is equivalent to calling NewRow on the DataTable. The new DataRow has to be Detatched by default because it contains no data by default, so it might violate various constraints. Once the fields of the DataRow have been populated appropriately, you need to call Rows.Add on the DataTable to add the DataRow and set its RowState to Added. The equivalent of that using the BindingSource is calling EndEdit.

Thank you, That makes the why clearer. After the user has complete their changes standard save code is used to update. It has a bindingsource.endEdit. I have traced the code to a check for dataset.haschanges statement in the Dataset.designer.vb the check returns False and the update fails.
The bindingsource.current row has the new record with changes. But when I look at the Datasource with the Dataset visualizer it is not added. So am I missing something to add/attach the row.
One more observation, I can add a record using the BindingNavagator.AddItem button. the only difference is I don't have the recordId and prefilled data from the calling form.

Code:

---

    Private Sub Laser_Status_InfoBindingNavigatorSaveItem_Click(sender As Object, e As EventArgs) _
        Handles Laser_Status_InfoBindingNavigatorSaveItem.Click, btnSave.Click

        Me.Validate()
        Me.Laser_Status_InfoBindingSource.EndEdit()
        Me.TableAdapterManager.UpdateAll(Me.LaserMaintLogDataSet)

        If LaserMaintLogDataSet.HasErrors Then
            MsgBox("Record Not Saved")
        Else
            MsgBox("Record Saved")
        End If

    End Sub

---

Code:

---

        Public Overridable Function UpdateAll(ByVal dataSet As LaserMaintLogDataSet) As Integer
            If (dataSet Is Nothing) Then
                Throw New Global.System.ArgumentNullException("dataSet")
            End If
            If (dataSet.HasChanges = false) Then
                Return 0
            End If

---

It's hard to say for sure what the issue is based on the information you have provided but I would guess that you actually have two different LaserMaintLogDataSet objects and you are adding the new row to one of them and then trying to save changes from the other. Did you add DataSets to both forms in the designer? If so then they are two different objects.

I am not sure either. I did get it to work after thinking about what you said and reevaluating the code. I was updating the controls on the Form thinking that would update the binding source. That assumption was wrong as most of the controls binding are set to "Datasource Update Mode: OnValidation". so setting them in code bypasses the validation therefore the bindingsource was no updated. The solution I came up with is to update the Bindingsource directly. Then call the endedit, This worked and the new record was added to the datasource with default values. I need to clean up the code but it worked. Thanks

Code:

---

    Private Sub PrtProblemLog1_Load(sender As Object, e As EventArgs) Handles MyBase.Load

        First_Time = True

        Me.OperatorsTableAdapter.Fill(Me.LaserMaintLogDataSet.Operators)
        Me.PrintersTableAdapter.Fill(Me.LaserMaintLogDataSet.Printers)
        Me.Laser_Status_InfoTableAdapter.Fill(Me.LaserMaintLogDataSet.Laser_Status_Info)

        currUser = UserManager.GetCurrentUser()
        lblUserName.Text = currUser.Name

        If Application.OpenForms().OfType(Of OperShiftLog).Any _
        Or Application.OpenForms().OfType(Of OperShiftLog1).Any Then
            Me.Laser_Status_InfoBindingSource.Filter = "Printer = '" & Pass_Printer & "'"
            If Pass_AddMod = "M" Then
                BindingNavigatorDeleteItem.Enabled = False
                BindingNavigatorAddNewItem.Enabled = False
                Me.Laser_Status_InfoBindingSource.Filter = "Shift_FKey = '" & Pass_Shift_Key & "' AND Printer = '" & Pass_Printer & "'"
            Else
                Me.Laser_Status_InfoBindingSource.Filter = "Printer = '" & Pass_Printer & "'"
            End If
        Else
            Me.Laser_Status_InfoBindingSource.Filter = "Printer = '" & cmbSelPrinter.SelectedValue & "'"
            Me.Laser_Status_InfoBindingSource.Sort = "Err_Time"
            Me.Laser_Status_InfoBindingSource.MoveLast()

            chkbActiveSel.Checked = True
            fillSelPrinter()
        End If

        First_Time = False
    End Sub
    Private Sub PrtProblemLog1_Shown(sender As Object, e As EventArgs) Handles Me.Shown

        If Pass_AddMod = "A" Then
            Add_New = True
            Me.Laser_Status_InfoBindingSource.AddNew()
            'tbStatus_key.Text = Int32.MaxValue
            Me.Laser_Status_InfoBindingSource.Current("Shift_FKey") = Pass_Shift_Key
            Me.Laser_Status_InfoBindingSource.Current("Printer") = Pass_Printer
            Me.Laser_Status_InfoBindingSource.Current("Operator") = Pass_Operator
            Me.Laser_Status_InfoBindingSource.Current("Status") = "Up"
            Me.Laser_Status_InfoBindingSource.Current("Meter") = 0
            Me.Laser_Status_InfoBindingSource.Current("Err_Time") = DateTime.Now
            Me.Laser_Status_InfoBindingSource.Current("Problem") = ""
            Me.Laser_Status_InfoBindingSource.EndEdit()

            cmbStatus.Focus()
            chkbSerReq.Checked = False
            cmbSelPrinter.Visible = False
            chkbActiveSel.Visible = False
            cmbPrinter.Enabled = False
            cmbOperator.Enabled = False
            dgvLaser_Status_Info.Enabled = False
        End If

    End Sub

---

Quote:

---

Originally Posted by wjburke2

That assumption was wrong as most of the controls binding are set to "Datasource Update Mode: OnValidation". so setting them in code bypasses the validation therefore the bindingsource was no updated.

---

A workaround for that is to call ValidateChildren on the form. Your original code called Validate, which will validate the last control to have focus. ValidateChildren will validate every control on the form.

Quote:

---

Originally Posted by wjburke2

The solution I came up with is to update the Bindingsource directly. Then call the endedit

---

You should be using the BindingSource in code anyway. That's what it's for: access to the bound data in code. The controls are for the user.

That said, you're not really updating the BindingSource. You would use the BindingSource to get the current data-bound item, which would be a DataRowView, and update that. If you want to work with a DataRow instead of a DataRowView then you can get that from its Row property. If you're using a typed DataTable, you can cast that DataRow as your typed DataRow type, e.g.

vb.net Code:

Dim rowView = DirectCast(Laser_Status_InfoBindingSource.Current, DataRowView)
Dim row = DirectCast(rowView.Row, Laser_Status_InfoDataRow)