Hi all,
I have to run a VB6 application on Raspbian using Raspberry PI-3, is it possible?
How can i do it?
Regards,
Vito
Printable View
Hi all,
I have to run a VB6 application on Raspbian using Raspberry PI-3, is it possible?
How can i do it?
Regards,
Vito
set up WINE to run your apps on linux.
Thanks for you reply.Quote:
Originally Posted by DEXWERX
Can i donwload it from internet directly on rasbpian?
The issue is that WINE needs an x86 emulator to run on. so it may end up being pretty slow.Quote:
Originally Posted by vito1984
PI-3 Raspbian --> X86 Emulator (Exagear) --> Windows Emulator (WINE) --> VB6 App
Here's a tutorial.
http://www.instructables.com/id/How-...aspberry-Pi-1/
Yep. Slow on top of slow on top of slow. Not a good recipe.
Maybe drink some wine instead.
Hmmm... is there another way, using windows iot maybe?Quote:
Originally Posted by dilettante
Of course using windows iot won't help if you "have" to run a VB6 application on a Raspberry PI-3 (an odd requirement).
That is designed to be a lightweight infrastructure that is capable of running a single Win-10 app, so you would normally have to write a Win-10 app for the device. The device then essentially becomes a single purpose device, supporting only whatever capabilities the running app has.
The Win10-IOT for the RPI-3 is still requiring the "ARM-target" with regards to the format of the Binaries it is able to run...Quote:
Originally Posted by vito1984
(meaning, you'd have to use .NET with appropriate ARM-target compiler-settings, to produce your own Apps for it,
there was "talk" about MS coming up with a "Win10 for ARM-platform, that allows to run x86-PE-Binaries",
but I guess we have to wait for that a while longer, if it ever makes it into a Win10-release).
Though there are quite a lot of true x86-based Hardware-solutions (which run a "normal", x86-based Win8/Win10)
in quite small Form-Factors (able to run VB6-compiled Binaries) - as e.g. one of the newest incarnations from Zotac:
https://www.zotac.com/product/mini_pcs/pi225
... but there's other vendors as well, who provide such (mostly Atom-based) Hardware...
These are all in the price-range of about 100-200$..., surely more expensive than the RPI-3,
but the 100-150$ price-difference should be bearable, when you only need a single (or a few)
of these Hardware-Platforms (since you'll surely save quite a few hours of "setup- and config-time")
HTH
Olaf
It is disappointing but true that few if any reasonably low cost x86 devices that might run Windows headless are available. I haven't seen any that are practical, under $100 USD, with any kind of GPIO lines.
A few come close but have been crowded out of the market by ARM devices. You can buy them but it might just be remaining stock. I doubt any are still in production.
Most are PC/104 devices meant for industrial control use, and start at $250 or so. These are viable products yet but pricey for low volume use.
Thank you guys for your replies.
Maybe I have to rewrite my app using VB15 and compile it with ARM settings. Is it a good solution?
If you're ging to rewrite the whole thing, then I'd recommend using a languageQuote:
Originally Posted by vito1984
which is not a "waste of your time" - as e.g. JavaScript (which runs natively on the PI,
allowing for a Browser-based GUI then)...
Here's for example, how to setup Node.js:
http://thisdavej.com/beginners-guide...-raspberry-pi/
Or in case you look for a more "integrated" js-based solution, there's also Electron:
https://resin.io/blog/electronjs-the-ultimate-guide/
Olaf
Windows IoT and Targetting ARM might end up being the least amount of headache, and certainly the most efficient as far as performance.Quote:
Originally Posted by vito1984
or you can just write a native linux app in C/C++ :)
Olaf's JS/Node solution is probably what I would opt for personally. Then you're cross platform, and you can extend Node if you have to.
Or you could write in B4J, since there are usable JVMs for a Pi running Linux.
Hi ,
I haven't got a clue about this subject, what is
good forQuote:
I have to run a VB6 application on Raspbian using Raspberry PI-3,
regards
Chris
A lot of people get sucked into buying these. They often just end up cluttering the junk drawer.
Maybe somebody wants to try to get some sort of use out of one, but it is hard to say what. Usually they'd be better off finding a deal on a small Windows box. I got one for like $125 including Win 10 Home a while back and it does fine for low-end tasks. Not bare-bones, a full 2GB PC w/mouse and keyboard. Added another 2GB of RAM and a fast USB3 flash drive for additional storage (it has an eMMC device as the main drive). Total cost under $160 unless you count the monitor.
I have 3 of them in my junk drawer as we speak. Also boxed up is a tiny Gigabyte Brix i5 with 16GB ram for running VM's, and previously used for tunneling out of corporate networks. The PI-3 is great for emulators, Robotics, etc. But like dil said - they usually just end up in the junk drawer.Quote:
Originally Posted by dilettante
Hi Dex and dilettante,
sounds like i didn't miss to much.
regards
Chris