[RESOLVED] Can't make image in userform clickable when created dynamically in other userform

Hi! I have created two userforms. The first one to allow the user to specify how many images to display in the the next userform. When this is done The second userform is started using .show.
Then however i want to run a short sub when the pictures are clicked in the second user form. But i can't make this work. I get no errors. There is just nothing hapening when i click the images. There might be a very simple solution to this since I'm very new to Visual Basic.

This is the code in the first userform that loads the images in to the next. I have edited filepaths because of security reasons. Sorry. :blush:

Code:

---

Private Sub UserForm_Initialize()

RowBox.Value = 1
CollumnBox.Value = 1

'Add things to boxes. You can choose up to 6 times 6 images.
For i = 1 To 6
    RowBox.AddItem i
    CollumnBox.AddItem i
Next i

End Sub
Sub OKButton_Click()
Dim i As Integer, j As Integer, k As Integer, l As Integer, o As Integer

m = RowBox.Value
n = CollumnBox.Value

SWLTool.Width = n * 54 + 660
SWLTool.Height = m * 108 + 443

o = 1
i = 1
For j = 1 To m
    For k = 1 To n
        For l = 1 To 3
            Dim myImage As MSForms.Image
            Set myImage = otherUserform.COntrols.Add("Forms.Image.1", "Image" & i & l)
            With otherUserform.COntrols("Image" & i & l)
                .Left = 10 + 54 * (k - 1)
                .Top = 18 + 108 * (j - 1)
                .Height = 108
                .Width = 54
                .PictureAlignment = 2
                .PictureSizeMode = 3
                .Enabled = True
                .MousePointer = 2
                If l = 1 Then
                    .picture = LoadPicture("filepath1" & o & ".bmp")
                    o = o + 1
                    .Visible = True
                ElseIf l = 2 Then
                    .picture = LoadPicture("filepath2")
                    .Visible = False
                ElseIf l = 3 Then
                    .picture = LoadPicture("filepath3")
                    .Visible = False
                End If
            End With
        Next l
        i = i + 1
    Next k
Next j

Unload Me
otherUserform.Show

End Sub

---

The second userform consists of a large amount of code-parts looking like this, but with different names for all different images.

Code:

---

Public Sub Image11_Click()  'with diferent numbers in the name to cover all pictures.
Call RadioPlacement(1)
End Sub

...
...

Private Sub Image363_Click()
Call RadioPlacement(36)
End Sub


Private Sub RadioPlacement(x)
UnitBox.Value = x
End Sub

---

The images loads fine to the other userform but "Call Radioplacements(nn)" doesn't execute when i click them. I tried replacing that with a measge box to verify, but that wouldn't run either.
I am very thankfull for any help! :)

Best regards
Granefelt

That's not vb.net code. Looks like classic vb...

Im sorry. I didn't realize.
If someone can point me in the right direction i can post it where it should be posted and maybe a moderator can remove this post.

Thank you!

Is it classic vb or office vba?

It is office vba.

http://www.vbforums.com/forumdisplay...ce-Development

Thank you!

Moved to Office Section.

Welcome to the forums.

what is unitbox?

put a breakpoint in one of the click events, click that image and step through the code

The problem is that you simply define an object... but you give no indication that events should be listened to. This is normally done by using the WithEvents when defining the variable:
Private WithEvents SomeObject as SomeType ...
But it comes with a rerally big caveat:

Quote:

---

Originally Posted by msdn

You can use WithEvents only at class or module level. This means the declaration context for a WithEvents variable must be a class or module and cannot be a source file, namespace, structure, or procedure.

---

Once you have dimedsomething with events, it shows up in the code browser like any other control and you can hook up any supported event.

BUT... and this is a big but, events are raised to that instance... so if you use in a loop, creating a new instance each time, you'll lose the ability to catch the events of those created before.

To be honest, I don't know if there's a way around that... be nice if there was. In .NET, I'd know how to do this, but with VBA, ... I'm not sure.

It's also possible that everything I've written is completely wrong (I'd be OK with that, because this feels like one of those thing that should be possible).

-tg

Quote:

---

I don't know if there's a way around that... be nice if there was

---

you must add the all the controls to a collection, so each class is a member of the collection, you can then have a single procedure to run from whichever control is clicked, passing the control to the procedure

there are several examples in this forum
i will see if i can find some

i posted a very basic example at http://www.vbforums.com/showthread.p...=1#post4927699
this was for checkboxes, but images would be very similar

Hi! Thank you all for your time and commitment. The problem is solved for me.
I might not really understand this, but it seems to be as many of you say. When creating controls dynamically you have to create a "class module" that handels these controls, with the help of WithEvent -function.
This is how my code looks now.

Code:

---

Private Sub OKButton_Click()
Dim i As Integer, j As Integer, k As Integer, l As Integer, o As Integer, myPath As String


m = RailBox.Value
n = SlotBox.Value

myPath = Application.ActiveWorkbook.Path

Dim collImgs As Collection
'Create a variable of our events class
Dim ImgH As ImageHandler
'Create a new collection to hold the classes
Set collImgs = New Collection

o = 1
i = 1
For j = 1 To m
    For k = 1 To n
        For l = 1 To 3
            Dim myImage As MSForms.Image
            Set myImage = SWLTool02.Controls.Add("Forms.Image.1", "Image1", True)
            With myImage
                .Name = "Image" & i & l
                .Left = 422 + 54 * (k - 1)
                .Top = 10 + 108 * (j - 1)
                .Height = 108
                .Width = 54
                If l = 1 Then
                    .Picture = LoadPicture(myPath & "\Bilder\" & o & ".bmp")
                    o = o + 1
                    .Visible = True
                ElseIf l = 2 Then
                    .Picture = LoadPicture(myPath & "\Bilder\G2.bmp")
                    .Visible = False
                ElseIf l = 3 Then
                    .Picture = LoadPicture(myPath & "\Bilder\G1.bmp")
                    .Visible = False
                End If
                .PictureAlignment = 2
                .PictureSizeMode = 3
                .Enabled = True
                .MousePointer = 5
                'Create a new instance of our events class
                Set ImgH = New ImageHandler
                'Set the button we have created as the button in the class
                Set ImgH.myImage = myImage
                'Add the class to the collection so it is not lost
                'when this procedure finishes
                collImgs.Add ImgH
               
            End With
        Next l
        i = i + 1
    Next k
Next j


SWLTool02.Width = 442 + 54 * n
SWLTool02.Height = 285
If m > 2 Then
    SWLTool02.Height = 260 + 108 * (m - 2)
End If

Unload Me
SWLTool02.Show

End Sub

---

With the addition of the class module:

Code:

---

Option Explicit

Public WithEvents myImage As MSForms.Image

Private Sub myImage_Click()

    If Len(myImage.Name) < 8 Then
        SWLTool02.PosBox.Value = Mid(myImage.Name, 6, 1)
    Else
        SWLTool02.PosBox.Value = Mid(myImage.Name, 6, 2)
    End If
   
End Sub

---

The second code-part that i showed in the original post is scrapped all together.

Again, thank you all for your time!

I allso found this post very helpfull.
http://stackoverflow.com/questions/1...mically-in-vba