[RESOLVED] connect / disconnect from the internet not dialup

hi
using api ,for win xp ,im not using dialup.
using this site http://allapi.mentalis.org/apilist/i.shtml .
how do i disconnect 1 pc on the internet ,ive read every thing in this forum
the api examples do not dont explain.
thanks

see this link, may be useful for u.

rasapi32.dll is dial up but im still looking

toggle internet connection
hey this is writen in vbs

Code:

---

set objShell=CreateObject("shell.application")

' Toggle NIC on or off
Option Explicit
Dim objCP, objEnable, objDisable, colNetwork
Dim clsConn, clsLANConn, clsVerb
Dim strNetConn, strConn, strEnable, strDisable
Dim bEnabled, bDisabled

Const NETWORK_CONNECTIONS = &H31&

strConn = "Local Area Connection"

'strEnable = "En&able"
strEnable = "&Aktivieren"
'strDisable = "Disa&ble"
strDisable = "&Deaktivieren"

Set colNetwork = Nothing
Set colNetwork = objShell.Namespace(NETWORK_CONNECTIONS) ' Network Connections (independent of country/language)

If colNetwork is Nothing Then
WScript.Echo "Network folder not found"
WScript.Quit
End If

Set clsLANConn = Nothing
For Each clsConn in colNetwork.Items
' In case the LAN is named “connection 2”, etc.

If Instr(LCase(clsConn.name),LCase(strConn)) Then
Set clsLANConn = clsConn
Exit For
End If
Next

' WScript.Echo clsLANConn

If clsLANConn is Nothing Then
WScript.Echo "Network Connection not found"
WScript.Quit
End If

bEnabled = True
Set objEnable = Nothing
Set objDisable = Nothing
For Each clsVerb in clsLANConn.verbs

' WScript.Echo clsVerb.name

If clsVerb.name = strEnable Then
Set objEnable = clsVerb
bEnabled = False
End If
If clsVerb.name = strDisable Then
Set objDisable = clsVerb
End If
Next

If bEnabled Then
objDisable.DoIt
WScript.Echo clsLANConn & " deaktiviert"
Else
objEnable.DoIt
WScript.Echo clsLANConn & " aktiviert"
End If

'Give the connection time to stop/start
WScript.Sleep 1000

---

this is in vb.net i think

can vb6 do this??
thanks

Code:

---

Public Class ToggleNetworkConnection

#Region "Public Methods"

    Public Shared Sub ToggleWirelessConnection()
        For Each verb As Shell32.FolderItemVerb In WirelessConnectionFolderItem.Verbs
            If verb.Name = "En&able" OrElse verb.Name = "Disa&ble" Then
                verb.DoIt()
                Exit For
            End If
        Next
        Threading.Thread.Sleep(1000)
    End Sub

    Public Shared Sub ToggleLocalAreaConnection()
        For Each verb As Shell32.FolderItemVerb In LocalAreaConnectionFolderItem.Verbs
            If verb.Name = "En&able" OrElse verb.Name = "Disa&ble" Then
                verb.DoIt()
                Exit For
            End If
        Next
        Threading.Thread.Sleep(1000)
    End Sub

#End Region

#Region "Properties"

    Private Shared ReadOnly Property ControlPanelFolder() As Shell32.Folder
        Get
            Dim shell As New Shell32.Shell()
            Return shell.NameSpace(3)
        End Get
    End Property

    Private Shared ReadOnly Property NetworkFolder() As Shell32.Folder
        Get

            Dim retVal As Shell32.Folder = Nothing

            For Each fi As Shell32.FolderItem In ControlPanelFolder.Items
                If fi.Name = "Network Connections" Then
                    retVal = fi.GetFolder()
                End If
            Next

            If retVal Is Nothing Then
                Throw New NetworkConnectionsFolderNotFoundException()
            Else
                Return retVal
            End If

        End Get
    End Property

    Private Shared ReadOnly Property LocalAreaConnectionFolderItem() As Shell32.FolderItem
        Get

            Dim retVal As Shell32.FolderItem = Nothing

            For Each folderItem As Shell32.FolderItem In NetworkFolder.Items
                Console.WriteLine(folderItem.Name)
                If InStr(folderItem.Name.ToLower(), "Local Area Connection".ToLower()) Then
                    retVal = folderItem
                    Exit For
                End If
            Next

            If retVal Is Nothing Then
                Throw New LocalAreaConnectionFolderItemNotFoundException()
            Else
                Return retVal
            End If

        End Get
    End Property

    Private Shared ReadOnly Property WirelessConnectionFolderItem() As Shell32.FolderItem
        Get

            Dim retVal As Shell32.FolderItem = Nothing

            For Each folderItem As Shell32.FolderItem In NetworkFolder.Items
                Console.WriteLine(folderItem.Name)
                If InStr(folderItem.Name.ToLower(), _
                        "Wireless Network Connection".ToLower()) Then
                    retVal = folderItem
                    Exit For
                End If
            Next

            If retVal Is Nothing Then
                Throw New WirelessConnectionFolderItemNotFoundException()
            Else
                Return retVal
            End If

        End Get
    End Property

#End Region

#Region "Custom Exceptions"

    Public Class NetworkConnectionsFolderNotFoundException
        Inherits Exception

        Public Overrides ReadOnly Property Message() As String
            Get
                Return "The Network Connections Folder Could Not Be Found!"
            End Get
        End Property
    End Class

    Public Class LocalAreaConnectionFolderItemNotFoundException
        Inherits Exception

        Public Overrides ReadOnly Property Message() As String
            Get
                Return "The Local Area Connection Folder Could Not Be Found!"
            End Get
        End Property
    End Class

    Public Class WirelessConnectionFolderItemNotFoundException
        Inherits Exception

        Public Overrides ReadOnly Property Message() As String
            Get
                Return "The Wireless Connection Folder Could Not Be Found!"
            End Get
        End Property
    End Class

#End Region

End Class

---

It appears that the code you are looking at would disable your network connection. I suppose that would be ok if you are the only pc on the network or do not need to access any other PC or device on the network.

If you are using a router it may be possible to disconnect your internet connection from the network by talking to the router. I do not know how exactly as I have never looked into it but most routers have a web interface that allows you to start/stop the internet connection, some may even provide an APi to do so.

Quote:

---

Originally Posted by DataMiser

It appears that the code you are looking at would disable your network connection. I suppose that would be ok if you are the only pc on the network or do not need to access any other PC or device on the network.

If you are using a router it may be possible to disconnect your internet connection from the network by talking to the router. I do not know how exactly as I have never looked into it but most routers have a web interface that allows you to start/stop the internet connection, some may even provide an APi to do so.

---

That is what my router can do. I can talk to my router via code and tell it to do certain things that you would normally do by using the interface and clicking on buttons. You need to understand your router and how to set up a direct link to it and know what messages etc to send to it. Be careful doing this because if you screw up you might wish you hadn't fiddled with it if you don't know how to rest it back to where it was

strConn = "Local Area Connection"
is in network connections,under start,control panel


i thought it was only the computer i would run the program on,,thanks

If you disconnect the computer from the network then it will be only that computer but it will deny all network access in or out not just the internet. If you shut down the internet at the router then it will shut down the internet for the whole network not just the pc you are using.

Quote:

---

Originally Posted by DataMiser

If you disconnect the computer from the network then it will be only that computer but it will deny all network access in or out not just the internet. If you shut down the internet at the router then it will shut down the internet for the whole network not just the pc you are using.

---

Exactly, but instead you just disconnect a particular PC which has it's own internal IP address. The other computers on that network will not be affected

i got it to work in vb6
thanks all

Code:

---

Option Explicit

 Dim LANEnable As Boolean
 Dim Count1 As Byte
 Dim EnableVerb As String
 Dim DisableVerb As String
 Dim ConnectionName As String
 Dim EnableVerbItem As Shell32.FolderItemVerb
 Dim DisableVerbItem As Shell32.FolderItemVerb
 Dim Verb As Shell32.FolderItemVerb
 Dim ShellApp As Shell32.Shell
 Dim ControlPanel As Shell32.Folder
 Dim FolderItem As Shell32.FolderItem
 Dim NetworkFolder As Shell32.Folder
 Dim LANConnection As Shell32.FolderItem

'put 2 comman buttons on form
'goto >>project>>references>>scrool down to microsoft shell controls and automation>>select ok


Private Sub Command1_Click()
  ConnectionName = "Local Area Connection"
  Set ShellApp = New Shell32.Shell
  DisableVerb = "Disa&ble"
  EnableVerb = "En&able"
  Set ControlPanel = ShellApp.NameSpace(ssfCONTROLS)
 
 
    ' Loop through the items in the control panel and obtain the Network Connections folder
        For Each FolderItem In ControlPanel.Items()
            'MsgBox FolderItem.Name
            If InStr(1, FolderItem.Name, "Network", vbTextCompare) <> 0 Then
                ' When found - exit the loop
                Set NetworkFolder = FolderItem.GetFolder
                Exit For
            End If
        Next

        If NetworkFolder Is Nothing Then
            Exit Sub
        End If
       
       
    ' Obtain the appropriate connection record
       
        For Each FolderItem In NetworkFolder.Items()
            'MsgBox FolderItem.Name
            If InStr(1, FolderItem.Name, ConnectionName, vbTextCompare) <> 0 Then
              ' When found - exit the loop
                Set LANConnection = FolderItem
                Exit For
            End If
        Next
       
        If LANConnection Is Nothing Then
            Exit Sub
        End If
       
       
       

        ' Run through all available options and obtain the appropriate action
        For Each Verb In LANConnection.Verbs
            If Verb.Name = EnableVerb Then
                Set EnableVerbItem = Verb
            End If
            If Verb.Name = DisableVerb Then
                Set DisableVerbItem = Verb
            End If
        Next

        ' Perform the enable / disable
        If LANEnable Then
            If EnableVerbItem Is Nothing Then Exit Sub
            EnableVerbItem.DoIt
        Else
          If DisableVerbItem Is Nothing Then Exit Sub
          DisableVerbItem.DoIt
        End If




End Sub

Private Sub Command2_Click()
        ConnectionName = "Local Area Connection"
  Set ShellApp = New Shell32.Shell
  DisableVerb = "Disa&ble"
  EnableVerb = "En&able"
  Set ControlPanel = ShellApp.NameSpace(ssfCONTROLS)
 
 
    ' Loop through the items in the control panel and obtain the Network Connections folder
        For Each FolderItem In ControlPanel.Items()
            'MsgBox FolderItem.Name
            If InStr(1, FolderItem.Name, "Network", vbTextCompare) <> 0 Then
                ' When found - exit the loop
                Set NetworkFolder = FolderItem.GetFolder
                Exit For
            End If
        Next

        If NetworkFolder Is Nothing Then
            Exit Sub
        End If
       
       
    ' Obtain the appropriate connection record
       
        For Each FolderItem In NetworkFolder.Items()
            'MsgBox FolderItem.Name
            If InStr(1, FolderItem.Name, ConnectionName, vbTextCompare) <> 0 Then
              ' When found - exit the loop
                Set LANConnection = FolderItem
                Exit For
            End If
        Next
       
        If LANConnection Is Nothing Then
            Exit Sub
        End If
       
       
       

        ' Run through all available options and obtain the appropriate action
        For Each Verb In LANConnection.Verbs
            If Verb.Name = EnableVerb Then
                Set EnableVerbItem = Verb
            End If
            If Verb.Name = DisableVerb Then
                Set DisableVerbItem = Verb
            End If
        Next

        ' Perform the enable / disable
        If LANEnable = False Then
            If EnableVerbItem Is Nothing Then Exit Sub
            EnableVerbItem.DoIt
       
         
        End If

 
End Sub

---

Great! Now if that code really works I know how to do it the easy way. Thanks for solving your own problem, that really helped me too.

im sorry ,its what i needed it to do.
but if there a better way ,maybe safer than that ,please help
thanks all

I don't know if that code is the best way or not but it is certainly better than messing around with the modem/router.