[RESOLVED] Form instead of MsgBox

I want to use form with label instead of messagebox in this code

Code:

---

Private Sub Form_Load()
On Error Resume Next
SaveSetting "hh", "StartupForm", "TimesRun", GetSetting("hh", "StartupForm", "TimesRun", 0) + 1
Timesrun = GetSetting("hh", "StartupForm", "TimesRun")
MsgBox "You have Used this programme " & Timesrun & " times"
End Sub

---

ok... so what's stopping you? Create your form... slap a label on it, and presumably a button, add some code behind the button to close it when clicked. Then create an instance of your form, set the label caption with your text then show the form. Be sure to use vbModal in the parameters.

-tg

Quote:

---

Originally Posted by techgnome

ok... so what's stopping you? Create your form... slap a label on it, and presumably a button, add some code behind the button to close it when clicked. Then create an instance of your form, set the label caption with your text then show the form. Be sure to use vbModal in the parameters.

-tg

---

how can I use this line of code for form and a label

Code:

---

MsgBox "You have Used this programme " & Timesrun & " times"

---

http://oi44.tinypic.com/f9nimq.jpg

try like this

Code:

---

Private Sub Command1_Click()
Form2.Label1.Caption = "You have Used this programme " & Timesrun & " times"
Form2.Show vbModal
End Sub

---

Quote:

---

Originally Posted by seenu_1st

try like this

Code:

---

Private Sub Command1_Click()
Form2.Label1.Caption = "You have Used this programme " & Timesrun & " times"
Form2.Show vbModal
End Sub

---

---

in my #1 post .. the code which i have shown saves the instances of a programme .. and i think & Timesrun & " times will not do the task ..

my aim is whenever the form1 is launched the popup message comes up that how many time the form1 has been launched. so instead of popup message i want to use form2 .

im not sure if you follow but seenu's code is excatly what your looking for
he placed his code under a click event and im guessing ur looking to load it at startup,
so just place his code under the form_load event
when your program starts it will tell it to load form2 at the same time and will also tell it to set the caption for that label

here I am attaching a sample ..

in this sample when programme is launched it shows tha count of programme to be use [popup message] .. when we go to form2 and then come back from form2 to form1 .. how to not show the [popup message]

ok this makes no real sense to me at all
i thought you were looking to make a program what when runs, opens another form to inform the user on how many times they have ran the program?
if this is the case then i think you need something like this

Code:

---

Private Sub Form_Load()
On Error Resume Next
SaveSetting "hh", "StartupForm", "TimesRun", GetSetting("hh", "StartupForm", "TimesRun", 0) + 1
Timesrun = GetSetting("hh", "StartupForm", "TimesRun")
Form2.Label1.Caption = "You have used this Programme - " & Timesrun & " Times"
Form2.Show
End Sub

---

if thats not what your looking to do then you need to explain it a little better

Quote:

---

Originally Posted by Weeluke

ok this makes no real sense to me at all
i thought you were looking to make a program what when runs, opens another form to inform the user on how many times they have ran the program?
if this is the case then i think you need something like this

Code:

---

Private Sub Form_Load()
On Error Resume Next
SaveSetting "hh", "StartupForm", "TimesRun", GetSetting("hh", "StartupForm", "TimesRun", 0) + 1
Timesrun = GetSetting("hh", "StartupForm", "TimesRun")
Form2.Label1.Caption = "You have used this Programme - " & Timesrun & " Times"
Form2.Show
End Sub

---

if thats not what your looking to do then you need to explain it a little better

---

brother have you read my post #7 .. it is now another issue ..

ohhh ok,
try replacing this with the code on your form1

Code:

---

Dim booCheck As Boolean

Private Sub Command1_Click()
Form2.Show
Unload Me
End Sub


Private Sub Form_Load()
Form1.Show
On Error Resume Next
SaveSetting "hh", "StartupForm", "TimesRun", GetSetting("hh", "StartupForm", "TimesRun", 0) + 1
Timesrun = GetSetting("hh", "StartupForm", "TimesRun")
If booCheck = False Then
    MsgBox "You have used this Programme - " & Timesrun & " Times"
    booCheck = True
Else
    'dont do anything
End If

End Sub

---

basically it makes a boolean variable which is auto set to false
then once the msgbox has been ran it sets the boolean to true
the if statement to check if boolean = true then dont show msgbox

hope this helps, sorry for the confusion

*facepalm* ....

I thought I explained how to do this all quite clearly back in post #2...

if you don't want [popup message] .... then TAKE OUT the call to MsgBox .... you wanted to replace the message box with form2... so that's what you shoudl have done.... use Form2.Show vbModal INSTEAD of MsgBox ... short of writing the code (which has already been done several times over now) and uploading it, I don't know how to be more clearer.

Meanwhile rather than posting the code so we can take a quick look, you're posting the whole project expecting people to download it, unzip it, extract the files, figure out which file to open, open it up.... too much effort for a simple problem.

The code in post #8 is what you want... no more, no less...

-tg

Try putting the code in the Form_Initialize section. Initialize means to start off usually runs only once throughout a project's execute (one per object) whereas the Form_Load section runs the code each time you load a form.

Edit:

vb Code:

Private Sub Form_Initialize()
Form1.Show
On Error Resume Next
SaveSetting "hh", "StartupForm", "TimesRun", GetSetting("hh", "StartupForm", "TimesRun", 0) + 1
Timesrun = GetSetting("hh", "StartupForm", "TimesRun")
popup.Label1.Caption = "You have used this Programme - " & Timesrun & " Times"
popup.Show
End Sub

Quote:

---

Originally Posted by Weeluke

ohhh ok,
try replacing this with the code on your form1

Code:

---

Dim booCheck As Boolean

Private Sub Command1_Click()
Form2.Show
Unload Me
End Sub


Private Sub Form_Load()
Form1.Show
On Error Resume Next
SaveSetting "hh", "StartupForm", "TimesRun", GetSetting("hh", "StartupForm", "TimesRun", 0) + 1
Timesrun = GetSetting("hh", "StartupForm", "TimesRun")
If booCheck = False Then
    MsgBox "You have used this Programme - " & Timesrun & " Times"
    booCheck = True
Else
    'dont do anything
End If

End Sub

---

basically it makes a boolean variable which is auto set to false
then once the msgbox has been ran it sets the boolean to true
the if statement to check if boolean = true then dont show msgbox

hope this helps, sorry for the confusion

---

thanks the code work fine .. but please I have another issue because I thought this code only work for all .. actually I have two popup forms .. popup1 and popup2 .. as I have shown in attached project only one popup form .. whereas there are two .. allthe way I have four forms in a project ..
form1
form2
popupfrm1
popupfrm2

at start up three forms are loaded form1 with popupfrm1 and popupfrm2 .. after unloading popupfrm1 and popupfrm2 .. the form1 have command button go to form2 .. and form2 have also command button go to form1 .. when coming back from form2 to form1 .. only one popupfrm1 is not shown whereas popupfrm2 is again popup .. by your code .. please help more

@ janu, have you tried the code I posted?

Lol, so you havent learnt one thing from the code that was given?
Sure why dont we write the whole project for you?
I really dont mean to be rude but the problem u are having has the solution in the code!!
Its like this, im happy to help if a person is stuck but i find it really annoying when people want it handed to them on a plate!
Please read through the code the solution is in there!
If you are unable to understand the code then ask what it means, no-one minds helping people to understand!
sorry for my little rant but this stuff grinds my gears!!
also try nightwalkers code because its excatly what you need!

Quote:

---

Originally Posted by Weeluke

Lol, so you havent learnt one thing from the code that was given?
Sure why dont we write the whole project for you?
I really dont mean to be rude but the problem u are having has the solution in the code!!
Its like this, im happy to help if a person is stuck but i find it really annoying when people want it handed to them on a plate!
Please read through the code the solution is in there!
If you are unable to understand the code then ask what it means, no-one minds helping people to understand!
sorry for my little rant but this stuff grinds my gears!!
also try nightwalkers code because its excatly what you need!

---

sorry I was absent minded I placed the request which was solved by Weeluke, actually I have another request ...

Here I am attaching a sample project .. in which one form is renamed as productupdate .. is it possible if when project is ist time launched on any mechine .. productupdate will open and then in next instance productupdate should not appear .. like project products are updated in ist instance only ... using system memory ...

check the attached project, hope u need something like this.

Quote:

---

Originally Posted by seenu_1st

check the attached project, hope u need something like this.

---

you have done a great job .. you are really great and helping .. rated you best

Quote:

---

Originally Posted by janu

you have done a great job .. you are really great and helping .. rated you best

---

You didn't even check my code which as much simpler.