graphing makes my head hurt...

so I was able to successfully code this...

vb Code:

Imports System.Windows.Forms.DataVisualization.Charting
 
 
Public Class Form2
 
 
 
    Public Sub Form2_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
 
        Dim theChart As New Chart
        Dim lineone As New List(Of Point)
        Dim linetwo As New List(Of Point)
        Dim theArea As New ChartArea
        Dim Series As New Series
 
        lineone.Add(New Point(TextBox1.Text, TextBox3.Text))
        lineone.Add(New Point(TextBox2.Text, TextBox4.Text))
        'linetwo.Add(New Point(textbox1.text, TextBox5.Text))
        'linetwo.Add(New Point(textbox2.text, TextBox6.Text))
 
        theChart.DataSource = lineone 'I want to add linetwo to this
 
 
        theArea.Name = "chartArea"
        theChart.ChartAreas.Add(theArea)
 
        theChart.Series.Clear()
 
 
        Series.XValueMember = "X"
        Series.YValueMembers = "Y"
        Series.ChartArea = "chartArea"
 
        theChart.Series.Add(Series)
 
        Me.Controls.Add(theChart)
        theChart.Dock = DockStyle.Fill
 
    End Sub
 
 
End Class

To which I was pretty happy that it worked the first time, the problem I am having now is trying to switch this to a line graph, add the second line/second set of points, and label the lines. I have read a few hundred posts about chart controls and they all seem to be geared around bar graphs with one set of data. I know im only a few lines of code away from getting this to work I just need a little nudge in the right direction

here's how to add a second series:

vb Code:

Public Class Form1
 
    Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
        Dim s1() As Point = {New Point(0, 10), New Point(1, 15), New Point(2, 10), New Point(3, 15), New Point(4, 10), New Point(5, 15)}
        Dim s2() As Point = {New Point(0, 15), New Point(1, 10), New Point(2, 15), New Point(3, 10), New Point(4, 15), New Point(5, 10)}
        'add points to first series
        For x As Integer = 0 To 5
            Chart1.Series(0).Points.AddXY(x, s1(x).Y)
        Next
        'add a second series
        Chart1.Series.Add("Series2")
        'set both series ChartType
        Chart1.Series(0).ChartType = DataVisualization.Charting.SeriesChartType.Line
        Chart1.Series(1).ChartType = DataVisualization.Charting.SeriesChartType.Line
        'add points to second series
        For x As Integer = 0 To 5
            Chart1.Series(1).Points.AddXY(x, s2(x).Y)
        Next
    End Sub
 
End Class

I keep getting this error message: "Index was out of range. Must be non-negative and less than the size of the collection. Parameter name: index"

on this line: "Chart1.Series(0).Points.AddXY(x, s1(x).Y)"

Alright, I am going to post what I got so far...

The reason I am doing the step ladder approach is because I am going to place the text boxes under the points on the X axis so the graph looks like its scrolling. The goal of this graph is to update every second with the updated information.

Im having trouble importing the T however, it keeps coming back to me with the error message, "cannot use a string "" as an integer."

As always, anytips or advice would be appreciated.

vb Code:

Imports System.Windows.Forms.DataVisualization.Charting
 
Public Class Form2
 
    Dim chart1 As New Chart
    Shared Property T As Integer
 
 
    Private Sub Form2_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
 
    End Sub
 
    Private Sub TextBox11_TextChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles TextBox10.TextChanged
 
        If T <= 2 Then
            Label1.Visible = False
 
            TextBox20.Text = TextBox21.Text
            TextBox31.Text = TextBox32.Text
 
            TextBox21.Text = TextBox22.Text
            TextBox32.Text = TextBox33.Text
 
            TextBox22.Text = Form1.TextBox10.Text
            TextBox33.Text = Form1.TextBox4.Text
 
            Dim s1() As Point = {New Point(T - 2, TextBox20.Text), New Point(T - 1, TextBox21.Text), New Point(T, TextBox22.Text)}
            Dim s2() As Point = {New Point(T - 2, TextBox31.Text), New Point(T - 1, TextBox32.Text), New Point(T, TextBox33.Text)}
            For x As Integer = T - 2 To T
                chart1.Series(0).Points.Add(x, s1(x).Y)
            Next
 
            chart1.Series.Add("Series2")
 
            chart1.Series(0).ChartType = DataVisualization.Charting.SeriesChartType.Line
            chart1.Series(1).ChartType = DataVisualization.Charting.SeriesChartType.Line
 
            For x As Integer = T - 2 To T
                chart1.Series(1).Points.Add(x, s1(x).Y)
            Next
            chart1.Series(0).Label = "PSS"
            chart1.Series(1).Label = "USS"
 
 
        End If
    End Sub
 
    Private Sub Form2_FormClosing(ByVal sender As Object, ByVal e As System.Windows.Forms.FormClosingEventArgs) Handles Me.FormClosing
        If Form1.CheckBox1.Checked Then Form1.CheckBox1.Checked = False
    End Sub
 
 
End Class

What line is giving you that error? There are lots of possibilities, as you have this type of thing in several places:

Point(T - 2, TextBox20.Text)

Any .Text property is going to return a string. You are implicitly converting that to an integer, which is always a bad idea, but if the string can't be converted to an integer, as an empty string cannot, then you will get an invalid conversion error. In other words, if you enter anything into the textbox that is not an integer, or leave the textbox blank, then these lines will cause an error.

The best thing to do is to turn Option Strict ON, which will result in lots of errors, including every one of these, but it would be good to fix every one of those errors, because they are all problems in one way or another.

Whether or not you turn Option Strict ON, you will still need to fix this issue, and the fix is pretty much the same in all cases. You have to explicitly convert the textbox text to an integer prior to using it. The best way to do that is using Integer.TryParse to convert the contents of the textbox into an integer prior to using it.

alright, I see what you are saying about trying to send a string in the place of an integer so i am now attempting to send form1.t to form2.textbox11.text as an integer

the point I am actually getting the error is on form1 at form2.show

vb Code:

Private Sub CheckBox1_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles CheckBox1.CheckedChanged
        If Timer1.Enabled = False Then
        MessageBox.Show("You Must Start The Test First!")
        Else
        Form2.Show()
        End If
 
    End Sub

I added "Integer.TryParse(Me.TextBox11.Text, Form1.T)" and from my reference books it seems like it should work. But as soon as I try to click the checkbox button I get the, string "" as an integer error message

vb Code:

Imports System.Windows.Forms.DataVisualization.Charting
 
Public Class Form2
 
    Dim chart1 As New Chart
 
    Private Sub Form2_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
 
        Integer.TryParse(Me.TextBox11.Text, Form1.T)
 
    End Sub
 
    Private Sub TextBox11_TextChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles TextBox10.TextChanged
 
 
        If Form1.T >= 2 Then
 
            Label1.Visible = False
 
            TextBox20.Text = TextBox21.Text
            TextBox31.Text = TextBox32.Text
 
            TextBox21.Text = TextBox22.Text
            TextBox32.Text = TextBox33.Text
 
            TextBox22.Text = Form1.TextBox10.Text
            TextBox33.Text = Form1.TextBox4.Text
 
            Dim s1() As Point = {New Point(Form1.T - 2, TextBox20.Text), New Point(Form1.T - 1, TextBox21.Text), New Point(Form1.T, TextBox22.Text)}
            Dim s2() As Point = {New Point(Form1.T - 2, TextBox31.Text), New Point(Form1.T - 1, TextBox32.Text), New Point(Form1.T, TextBox33.Text)}
            For x As Integer = Form1.T - 2 To Form1.T
                chart1.Series(0).Points.Add(x, s1(x).Y)
            Next
 
            chart1.Series.Add("Series2")
 
            chart1.Series(0).ChartType = DataVisualization.Charting.SeriesChartType.Line
            chart1.Series(1).ChartType = DataVisualization.Charting.SeriesChartType.Line
 
            For x As Integer = Form1.T - 2 To Form1.T
                chart1.Series(1).Points.Add(x, s1(x).Y)
            Next
            chart1.Series(0).Label = "PSS"
            chart1.Series(1).Label = "USS"
 
 
        End If
    End Sub
 
    Private Sub Form2_FormClosing(ByVal sender As Object, ByVal e As System.Windows.Forms.FormClosingEventArgs) Handles Me.FormClosing
        If Form1.CheckBox1.Checked Then Form1.CheckBox1.Checked = False 
    End Sub
 
 
End Class

I guess what I am trying to do is, as soon as textbox11 is updated with new data, move all the old data down a row, and then graph all the data

Hey,

What is T?
What are you attempting with

Code:

---

  Integer.TryParse(Me.TextBox11.Text, Form1.T)

---

Are you using that to try to update TextBox11 on Form2 with the value of T ?

Also do you realise you are handling TextBox10's TextChanged with

Code:

---

Private Sub TextBox11_TextChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles TextBox10.TextChanged

---

?

T = Time

I use it for what most people use for i. On form1 I have a loop that is t+1

Yes, I am trying to update form2.textbox11 with form1.t

and no, I did not see that I had textbox11 handle textbox10_change. I will fix that now.

However, im still receiving the form2.show "string as integer" message.

what is the way to have form2 handle form1.timer1_tick? maybe that would be an easier alternative to form2 handling form1.t

random side regex question... if my line looks like this..

** example test me 1234 [com.test.example] **

how do I pull out what's in between the []?

if tried:

[[-]]
[-]
\[\]
\[:alnum:\]
\[:word:\]
\[...\]
^[]$
\[:print:\]

and maybe a dozen others...

That's not how integer.tryparse works

Code:

---

Integer.TryParse(Me.TextBox11.Text, Form1.T)

---

will try to parse the string from Form2's TextBox11.Text and store the Integer result in Form1.T (If the TextBox is empty, it will set T to 0).

When Shaggy was talking about having to use Integer.TryParse, I think he was mainly (but not only) refering to the TextBoxes in

Code:

---

  Dim s1() As Point = {New Point(Form1.T - 2, TextBox20.Text), New Point(Form1.T - 1, TextBox21.Text), New Point(Form1.T, TextBox22.Text)}
  Dim s2() As Point = {New Point(Form1.T - 2, TextBox31.Text), New Point(Form1.T - 1, TextBox32.Text), New Point(Form1.T, TextBox33.Text)}

---

since the Point structure requires Integers as parameters, not Strings.

He also advised to turn Option Strict On i.e.

Code:

---

Option Strict On

Imports System.Windows.Forms.DataVisualization.Charting
 
Public Class Form2

---

(on both Forms!! ;) )


As for Form2 handling the Form1 Timer Tick Event, I'd be tempted to replace your TextBox11.TextChanged handler with a Public sub on Form 2.

Code:

---

    Public Sub UpdateChart(ByVal t As Integer, ByVal newX As Integer, ByVal newY As Integer)

      'code from your Sub TextBox11_TextChanged goes here

    End Sub

---

but I am happy to be corrected. Call it from your form1.timer1_tick Event, passing in the values for T and what is in Form1.TextBox10.Text and Form1.TextBox4.Text converted to integers

There's some bits not quite right in your Charting code, but one step at a time (get some more Aspirins :p)

Alright, I turned option strict on on both forms, and fixed the string/integer errors that it suggested.

Now the fun part, not only trying to learn how to graph, but also learning how to handle timer ticks across forms : P

alright, im going out on a limb here but would the syntax of form1.timer1_tick look like this?

updatechart(t,pvalue,uvalue)?

and then on form two under public sub updatechart:

vb Code:

Public Sub UpdateChart(ByVal T As Integer, ByVal X As Integer, ByVal Y As Integer)
 
        If Me.Visible = True And T > 2 Then
 
            Label1.Visible = False
 
            TextBox20.Text = TextBox21.Text
            TextBox31.Text = TextBox32.Text
 
            TextBox21.Text = TextBox22.Text
            TextBox32.Text = TextBox33.Text
 
            TextBox22.Text = Form1.TextBox10.Text
            TextBox33.Text = Form1.TextBox4.Text
 
            Dim s1() As Point = {New Point(T - 2, CInt(TextBox20.Text)), New Point(T - 1, CInt(TextBox21.Text)), New Point(T, CInt(TextBox22.Text))}
            Dim s2() As Point = {New Point(T - 2, CInt(TextBox31.Text)), New Point(T - 1, CInt(TextBox32.Text)), New Point(T, CInt(TextBox33.Text))}
            For X = T - 2 To T
                chart1.Series(0).Points.Add(X, s1(X).Y)
            Next
 
            chart1.Series.Add("Series2")
 
            chart1.Series(0).ChartType = DataVisualization.Charting.SeriesChartType.Line
            chart1.Series(1).ChartType = DataVisualization.Charting.SeriesChartType.Line
 
            For X = T - 2 To T
                chart1.Series(1).Points.Add(X, s1(X).Y)
            Next
            chart1.Series(0).Label = "PSS"
            chart1.Series(1).Label = "USS"
        End If
 
    End Sub

now form2 will show, but I get still get this error "Index was out of range. Must be non-negative and less than the size of the collection. Parameter name: index"

on this line, "chart1.Series(0).Points.Add(X, s1(X).Y)"

btw, if I did that updatechart(x,y,z) thing right, that is an awesome trick, i had no idea. And the new bottle of aspirin has been opened : P

OK, first off, I know nothing about using charts, so I was hoping you'd be teaching me as you went along..... :bigyello:

That said, I think there's a few things wrong with the code you posted. If you look at the example .paul. gave in Post #2, he did it all in his Form_Load handler, and I think some of the code you have there needs moving to your Form_Load handler too.

I'm thinking these lines in particular

vb Code:

chart1.Series.Add("Series2")
 
chart1.Series(0).ChartType = DataVisualization.Charting.SeriesChartType.Line
chart1.Series(1).ChartType = DataVisualization.Charting.SeriesChartType.Line
 
  
chart1.Series(0).Label = "PSS"
chart1.Series(1).Label = "USS"

.

Next, are the values of X and Y found from Form1.TextBox10.Text and Form1.TextBox4.Text ? If so you can replace lines 13 and 14 as

Code:

---

  TextBox22.Text = X
  TextBox33.Text = Y

---

What values are you passing in for T X and Y?
T is obviously > 2 for the code to be executed and so X in

vb Code:

For X = T - 2 To T
   chart1.Series(0).Points.Add(X, s1(X).Y)
Next

will exceed 2 but your s1 array has an upperbound of 2 so you will get an error.

Also, I don't think you are using the right method to add your points.
.paul. used Chart1.Series(0).Points.AddXY(x, s1(x).Y). I'm sure you know where the docs are :p

alright, im going back and starting from the beginning :

vb Code:

Private Sub Form2_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
        Dim s1() As Point = {New Point(0, 10), New Point(1, 15), New Point(2, 10), New Point(3, 15), New Point(4, 10), New Point(5, 15)}
        Dim s2() As Point = {New Point(0, 15), New Point(1, 10), New Point(2, 15), New Point(3, 10), New Point(4, 15), New Point(5, 10)}
        'add points to first series
        For x As Integer = 0 To 5
            chart1.Series(0).Points.AddXY(x, s1(x).Y)
        Next
        'add a second series
        chart1.Series.Add("Series2")
        'set both series ChartType
        chart1.Series(0).ChartType = DataVisualization.Charting.SeriesChartType.Line
        chart1.Series(1).ChartType = DataVisualization.Charting.SeriesChartType.Line
        'add points to second series
        For x As Integer = 0 To 5
            chart1.Series(1).Points.AddXY(x, s2(x).Y)
        Next
    End Sub

This is .paul's original code and even this is outputting the error: "Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index"

I trust that .paul is right and im just doing something wrong but any thoughts?

That actually works for me (no other code on Form2). Where are you getting that error ?

Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index

on

chart1.Series(0).Points.AddXY(x, s1(x).Y)


I thought it might be me

Let me throw this at you and see if it's the sort of thing you are trying to do.

vb Code:

Option Strict On
 
Public Class Form1
 
    Dim f2 As New Form2
    Dim intY As Integer = 4
    Dim intDir As Integer = 1
 
    Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
        Timer1.Interval = 1000
        Timer1.Enabled = True
 
        f2.Show()
        f2.BringToFront()
    End Sub
 
 
    Private Sub Timer1_Tick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Timer1.Tick
        Static intTime As Integer = 0
        intTime += 1
 
        intY += intDir
        If intY > 8 Then intDir = -1
        If intY < 4 Then intDir = 1
        Call f2.UpdateChart(intTime, intY)
    End Sub
 
End Class

vb Code:

Option Strict On
Imports System.Windows.Forms.DataVisualization.Charting
 
Public Class Form2
 
    Private Yvalues() As Integer = {0, 0, 0}
 
    Private Sub Form2_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
        Chart1.Series.Add("Series2")
 
        Chart1.Series(0).ChartType = DataVisualization.Charting.SeriesChartType.Line
        Chart1.Series(1).ChartType = DataVisualization.Charting.SeriesChartType.Line
 
        Chart1.Series(0).Label = "PSS"
        Chart1.Series(1).Label = "USS"
 
    End Sub
 
    Public Sub UpdateChart(ByVal T As Integer, ByVal NewY As Integer)
 
        If Me.Visible = True Then
 
            Label1.Visible = False
 
            Yvalues(0) = Yvalues(1)
            Yvalues(1) = Yvalues(2)
            Yvalues(2) = NewY
 
            TextBox20.Text = Yvalues(0).ToString
            TextBox21.Text = Yvalues(1).ToString
            TextBox22.Text = Yvalues(2).ToString
            TextBox31.Text = T.ToString
 
            Chart1.Series(0).Points.Clear()
            For X As Integer = 0 To 2
                Chart1.Series(0).Points.AddY(Yvalues(X))
            Next
 
        End If
 
    End Sub
 
End Class

It's not elegant; I'm just wondering if I've understood what you are trying to do. Hope it helps.

a few things i have questions on..

why would you add:

TextBox31.Text = T.ToString

T is the X

could I do something like:

Yvalues1(t-2) = Yvalues1(t-1)
Yvalues1(t-1) = Yvalues1(t)
Yvalues1(t) = NewY1

For X As Integer = t-2 To t
chart1.Series(0).Points.AddY(Yvalues1(X))


the only reason why I would like T to be the X is because that way the user can see how far along the graph he is.

i tried compiling it and running it your way and then my way and now I am getting the error message

"Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index"

on the line:

Chart1.Series(0).ChartType = DataVisualization.Charting.SeriesChartType.Line

why is it always the same error, am i missing a reference?

Hey,
The code is meant purely to see if you can get it working and, hopefully, for you to build upon. I still don't have a clear idea of what you are trying to achieve. I am thinking you want to display only 3 points and scroll the result to the left as you add the latest data point as the new third point on the chart. Is that correct?

So:

TextBox31.Text = T.ToString

was just to show T changing and to demonstrate you can update your TextBoxes with the values you pass to the sub rather than fetching them again from Form1.

I don't know what values T will have. I assume T will start at 1 and increment by 1 at each Timer Tick on Form1. So

Yvalues1(t-2) = Yvalues1(t-1)
Yvalues1(t-1) = Yvalues1(t)
Yvalues1(t) = NewY1

For X As Integer = t-2 To t
chart1.Series(0).Points.AddY(Yvalues1(X))

will give problems as Yvalues1 is a fixed length array. For example, when T is 10, Yvalues1(t-2) will be trying to access index 8 of an array whose Upperbound is only 2. So you'd have to do some more maths on T to get the index range between 0 and 2. Easy enough. That's assuming you want to stick with using an array to store the latest 3 data points you have and plotting only them. I'll come back to that in a minute.

The error you are getting has me wondering if you have a Chart Control on your Form2, and if you have 'Series 1' in its Series collection? If you do have a Chart Control on Form2, I'd try deleting it and adding a fresh one.

Now, I've changed the code on Form2 (been having a nose around the available methods outlined in the MSDN) and come up with an example of the effect I'm assuming you want. Please say if it's not right.

vb Code:

Option Strict On
Imports System.Windows.Forms.DataVisualization.Charting
 
Public Class Form2
 
    Private Sub Form2_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
        ' Chart1.Series.Add("Series2")
 
        Chart1.Series(0).ChartType = DataVisualization.Charting.SeriesChartType.Line
        ' Chart1.Series(1).ChartType = DataVisualization.Charting.SeriesChartType.Line
 
        ' Chart1.Series(0).Label = "PSS"
        ' Chart1.Series(1).Label = "USS"
 
    End Sub
 
    Public Sub UpdateChart(ByVal T As Integer, ByVal NewY As Integer)
 
        If Me.Visible = True Then
 
            Label1.Visible = False
 
            TextBox31.Text = T.ToString
 
            Chart1.ChartAreas(0).AxisX.Minimum = T - 7
            Chart1.ChartAreas(0).AxisX.Maximum = T + 1
            Chart1.Series(0).Points.AddY(NewY)
            Chart1.Series(0).Points(Chart1.Series(0).Points.Count - 1).Label = NewY.ToString
 
        End If
 
    End Sub
 
End Class

It's adding the data (as it becomes available) to the Chart's Series DataPoint Collection and modifying the XAxis Min and Max values which gives the desired scrolling effect.

The big down side is I have no idea how many points you can add before it throws a wobbler. At some point it's going to run out of memory, although I suspect it will not actually be a problem unless it's left running for several days (pure guess).

The advantage of the earlier array approach is that you only store a fixed set of points using a fixed amount of memory; But it's a bit more complex (you have to shuffle them off one end to make space to add the new point; adjust indexing values; clear the Chart points; etc).

Well, as I say, Charts are new to me and I'm just trying to help you get some code that works and give you a few ideas. Maybe you can adapt the two diferent approaches to one that is reliable without your head exploding :eek2:

By the way, I just wanted to say thanks for being patient and explaining things well, im definitely further then I would of been on my own : P

Alright, with that being said...

Your code is awesome.

That is exactly what I am trying to do in every way, shape, and form.

not only that but it makes no sense how you did it in so few lines.

Seriously though, Im looking at your code and how does it remember all the previous yvalues???

one thing that I am noticing though, if you close form2, the graph will not reappear again.

So it will just keep storing updatechart(x,y) as long as it keeps going?

but holy crap man, genius