Winsock forcefully close connection

Hi,

I have a problem.

When i connect to a online server , i recieve data under DATA ARRIVAL...but sometimes the server takes a looooong time to close the connection and to trigger my second command.

What im thinking is of a way to forcefully close the connection after i get some data in DATA ARRIVAL.

I tried to trigger Winsock.close in data arrival but it did not help...and another problem is that dara arrival triggers many times, so it would do the winsock.close triggering manytimes, invoking my command many times (the command that is under winsock.close)

cheers!

When one end does a Close on an open TCP connection it means "I am done sending." However the other end can keep its stream open and send all day long until it decides to Close from its end.

Maybe the real question here is why the other end is not doing a Close when you expect it to. Or maybe why you care about the Close at all.

I think what you are asking for is a Reset, and the Winsock control does not provide that option. It really isn't the best way to go about things anyhow. Usually a server keeps the connection open for a good reason. Are you trying to do something unusual here?

No, it's that i noticed that some server mosty 1% of them, even less, have that thing to keep open connections for a long long long time.

but i think it's something that is not configured on purpose hmmm

so basically i can't do anyhting about it but to take all the data recieved in data arrival and proceed...

odd.. i have done a few server / client based apps. i never had a winsock connection error.

vb Code:

Option Explicit
Private Type tClient
    FileName As String
    FileSize As Long
    BytesReceived As Long
        FileNum As Integer
End Type
 
Private Clients() As tClient
 
Private Sub cmdConnect_Click()
    If cmdConnect.Caption = "Start Listening" Then
        SckReceiveFile(0).LocalPort = Val(Me.txtListenPort.Text)
        SckReceiveFile(0).Listen
        
        cmdConnect.Caption = "Stop Connections"
    Else
        SckReceiveFile(0).Close
        cmdConnect.Caption = "Start Listening"
    End If
End Sub
 
Private Sub Form_Load()
    lstConnections.ListItems.Add , , "0"
End Sub
 
Private Sub lstConnections_BeforeLabelEdit(Cancel As Integer)
    Cancel = 1
End Sub
 
Private Sub SckReceiveFile_Close(Index As Integer)
    On Error Resume Next
    
    SckReceiveFile(Index).Close
        Close Clients(Index).FileNum
    
    If Clients(Index).BytesReceived < Clients(Index).FileSize Then
        Kill App.Path & "\" & Clients(Index).FileName
        
        Me.lstConnections.ListItems(Index + 1).SubItems(4) = "Incomplete, File Deleted"
    Else
        Me.lstConnections.ListItems(Index + 1).SubItems(4) = "Transfer Complete"
    End If
    FitTextInListView Me.lstConnections, 4, , Index + 1
    
    Clients(Index).FileNum = 0
    Clients(Index).BytesReceived = 0
    Clients(Index).FileSize = 0
    Clients(Index).FileName = ""
End Sub
 
Private Sub FitTextInListView(LV As ListView, ByVal Column As Integer, Optional ByVal Text As String, Optional ByVal ItemIndex As Long = -1)
    Dim TLen As Single, CapLen As Single
    
    CapLen = Me.TextWidth(LV.ColumnHeaders(Column + 1).Text) + 195
    
    If ItemIndex >= 0 Then
        If ItemIndex = 0 Then
            TLen = Me.TextWidth(LV.ListItems(ItemIndex).Text)
        Else
            TLen = Me.TextWidth(LV.ListItems(ItemIndex).SubItems(Column))
        End If
    Else
        TLen = Me.TextWidth(Text)
    End If
    
    TLen = TLen + 195
    
    If CapLen > TLen Then TLen = CapLen
    
    If LV.ColumnHeaders(Column + 1).Width < TLen Then LV.ColumnHeaders(Column + 1).Width = TLen
End Sub
 
Private Sub SckReceiveFile_ConnectionRequest(Index As Integer, ByVal requestID As Long)
    Dim K As Integer, LI As ListItem
    
    For K = 1 To SckReceiveFile.UBound
        If SckReceiveFile(K).State = sckClosed Then Exit For
    Next K
    
    If K = SckReceiveFile.UBound + 1 Then
        Load SckReceiveFile(SckReceiveFile.UBound + 1)
        ReDim Preserve Clients(SckReceiveFile.UBound)
        
        K = SckReceiveFile.UBound
        lstConnections.ListItems.Add , , CStr(K)
    End If
    
    SckReceiveFile(K).Accept requestID
    
    If Len(SckReceiveFile(K).RemoteHost) = 0 Then
        Me.lstConnections.ListItems(K + 1).SubItems(2) = SckReceiveFile(K).RemoteHostIP
    Else
        Me.lstConnections.ListItems(K + 1).SubItems(2) = SckReceiveFile(K).RemoteHost
    End If
    
    FitTextInListView Me.lstConnections, 2, , K + 1
End Sub
 
Private Sub SckReceiveFile_DataArrival(Index As Integer, ByVal bytesTotal As Long)
    Dim sData As String, Pos As Long, Pos2 As Long
    
    SckReceiveFile(Index).GetData sData, vbString
    
    If Clients(Index).FileSize = 0 And InStr(1, sData, ":") > 0 Then
        Pos = InStr(1, sData, ",")
        
        Clients(Index).FileSize = Val(Left(sData, Pos - 1))
        Pos2 = InStr(Pos, sData, ":")
        Clients(Index).FileName = Mid(sData, Pos + 1, (Pos2 - Pos) - 1)
        
        Clients(Index).FileNum = FreeFile
        Open App.Path & "\" & Clients(Index).FileName For Binary Access Write Lock Write As Clients(Index).FileNum
        
        sData = Mid(sData, Pos2 + 1)
        
        Me.lstConnections.ListItems(Index + 1).SubItems(3) = Clients(Index).FileName
        FitTextInListView Me.lstConnections, 3, , Index + 1
    End If
    
    If Len(sData) > 0 Then
        Clients(Index).BytesReceived = Clients(Index).BytesReceived + Len(sData)
        Put Clients(Index).FileNum, , sData
        
        Me.lstConnections.ListItems(Index + 1).SubItems(4) = Format(Clients(Index).BytesReceived / Clients(Index).FileSize * 100#, "#0.00") & " %"
        FitTextInListView Me.lstConnections, 4, , Index + 1
        
        If Clients(Index).BytesReceived >= Clients(Index).FileSize Then
            SckReceiveFile_Close Index
        End If
    End If
End Sub
 
Private Sub tmrStatus_Timer()
    Dim K As Long, TmpStr As String
    
    For K = 0 To SckReceiveFile.UBound
        TmpStr = Choose(SckReceiveFile(K).State + 1, "Closed", "Open", "Listening", "Connection pending", "Resolving host", "Host resolved", "Connecting", "Connected", "Server is disconnecting", "Error")
        
        If Me.lstConnections.ListItems(K + 1).SubItems(1) <> TmpStr Then
            Me.lstConnections.ListItems(K + 1).SubItems(1) = TmpStr
            FitTextInListView Me.lstConnections, 1, , K + 1
        End If
    Next K
End Sub
 
Private Sub txtListenPort_Validate(Cancel As Boolean)
    txtListenPort.Text = Val(txtListenPort.Text)
End Sub

*this is my server based code. :P hope it helps

this is done with a timer, a textbox, listview, command button, and a winsock control

*oh this app, can handle a ton of connections :P

Quote:

---

Originally Posted by batori

No, it's that i noticed that some server mosty 1% of them, even less, have that thing to keep open connections for a long long long time.

but i think it's something that is not configured on purpose hmmm

so basically i can't do anyhting about it but to take all the data recieved in data arrival and proceed...

---

Off top of my head, but maybe something like this

1. Attempt to close your connection and set a flag identifying that winsock's Index so that if the DataArrival occurs afterwards, you simply exit the event

2. After attempted close, dynamically load another WinSock control and try to reconnect with that. Obviously we are talking about a control array here.

3. Since the "closed" winsock is still loaded, you'll want to code for tracking that its slot in the control array is available for a new winsock instance down the road.