[RESOLVED] How to get and save text from text box ?

Hi,

I have a frame with text boxes and ok and cancel click which is called from an other frame. I want to save the text that user enters in textbox called "txtTargetName" in a file. I tried to define the content of one text box (for test) as:

Code:

---

Option Explicit

1. Private sub cmdOK_Click()
2. dim Point as string
3. 'here I open file as #1 for output
4. Point=txtTargetName.Text
5. print #1, Point
6. End sub

---

but it says "Type mismatch". If I put "dim Point..." after option explicit and before private sub program says type missmatch, also. And if I put it in mother frame, it says that the variable is not defined.

How can i fix this?

I work with VB 6.0

Reason for "type mismatch" error is bad naming convention - Point is a method (applies to form or picturebox objects) that gets rgb color for specified x/y coordinates.
There is also no code that actually opens/closes the file... Try this instead:

Code:

---

Dim strText As String
Dim iFileNum As Integer

    strText = txtTargetName.Text
    iFileNum = FreeFile
   
    Open App.Path & "\mydata.txt" For Output As iFileNum
        Print iFileNum, strText
    Close iFileNum

---

But I have other variables that are different names (souch as PrTy, PrHe, Re) and it is the same with them too.

The code is

Code:

---

0. Option Explicit

1. Private sub cmdOK_Click()

2. Dim PointName as String
3. PointName=txtTargetName.Text

4. Open "C:\First.txt" For Output As #1
    5. Print #1, PointName

6. End sub

---

So where the problem could be?

As I said, the form is called from an other form.

What exactly do you mean when you say the form is called from another form?

Also you can use the text values directly like:

Code:

---

Option Explicit

1. Private sub cmdOK_Click()

4. Open "C:\First.txt" For Output As #1
    5. Print #1, txtTargetName.Text

6. End sub

---

Quote:

---

Originally Posted by Morris_Zg

But I have other variables that are different names (souch as PrTy, PrHe, Re) and it is the same with them too.
....

---

No, "point" is a word reserved by VB6 and you shouldn't use it for your own variable. The others aren't.

I meant to say that when user presses a command button on another form, the form we are talking about shows. there is to fulfill several text boxes and when ok button is pressed the entered text must be saved. I can easily change the name of the PointName variable into something else, but it doesn't work for other variables, as well. so i'm not sure if naming is the only problem

could it be that the problem is with local or global definition of the variables?

Quote:

---

Originally Posted by Morris_Zg

I meant to say that when user presses a command button on another form, the form we are talking about shows...

---

I thought we are talking about the "type mismatch" error you were getting and I explained (with example) what is the cause and how to "fix" it.
What other form you are talking about I have no idea - perhaps you can elaborate a bit more.

Quote:

---

Originally Posted by Morris_Zg

I meant to say that when user presses a command button on another form, the form we are talking about shows. there is to fulfill several text boxes and when ok button is pressed the entered text must be saved. I can easily change the name of the PointName variable into something else, but it doesn't work for other variables, as well. so i'm not sure if naming is the only problem

could it be that the problem is with local or global definition of the variables?

---

Please create a zip or rar file from your complete project and attach it to a post. Once you've done that please describe the exact steps necessary to recreate the problem.

Let's get back to basics and try this. Build a form with a command button, a label, and a text box. Then apply this code:

Code:

---

Private Sub Command1_Click()
Text1.Text = "Hello, Morris Zg"
Open "MyTextFile.Txt" For Output As #1
Print #1, Text1.Text
Close #1
Open "MyTextFile.Txt" For Input As #1
Label1.Caption = Input$(LOF(1), #1)
Close #1
End Sub

---

Click on the command button as many times as you want.

Here is the attachment. I've done some changes.

So, I want that when user presses "Save Target" that the data are saved to file.
In frame "Measurement", there is "Sub cmdSaveTarget_Click()" in which stays the code for saving the variables.

There are 2 kind of variables:
1. from frame "Measurement" (but they aren't problem) and
2. from frame "SaveAsTarget" - and these are the problem. It seems that values of these variables aren't preserved to be saved in a text file.
And also, the file isn't beeing created even if I put the open/print/close code in frame "SaveAsTarget".

I hope I explained well this time. :o

RAR is not a popular format around here - use ZIP if you can.

Quote:

---

Originally Posted by RhinoBull

RAR is not a popular format around here - use ZIP if you can.

---

7-zip (rar) is easy to download and use.

I can't seem to find a frame named SaveAsTarget. What form is it on?

I also need complete, step by step, instructions on how to reproduce the problem.

There seems to be a mixup in terminology. Did you maybe mean Form instead of Frame in post #10? There is a SetAsTarget form but I don't see anything that might be "SaveAsTarget" frame. Also, in your code you use frm prefix for Frame controls, which is used for Forms. Frames should have a "fra" prefix, ie fraInputFields.

On frmSetAsTarget in cmdOk_Click event the code to save the to a file is commented out. Is that what you are having trouble with?

One off topic comment about that code, don't hardcode file numbers (#1), instead use FreeFile function to get one. For more info check this link (namely section Using FreeFile) http://www.vb6.us/tutorials/how-read-simple-text-files

One more question, frmMeasure, cmdSaveTarget_Click event code, you just have a Print line. Where is that file Opened and Closed? You should usually do that in one block so there's no chance of trying to write to an unopened file or forgetting to close it properly.

Hey,
yes, I see now I've mixed terminology. I was saying frame instead of form.

About the file:
-the line open file is in "Sub cmdOnline_Click()" (Open "C:\Nulto mjerenje.txt" For Output As #1) and
-closing the file is in "Sub cmdOffline_Click()" (Close #1).

But, this subs don't execute until the instrument is connected to application (Go Online and Go Offline buttons). So, for test, I've put open/print/close in form frmSaveAsTarget. These lines are now commented out, because they are just for test. Even when I turned them on, they didnt work.

Conclusion, the issue is how to get data into form frmMeasurement from form frmSaveAsTarget. I think this is the problem. Could I be right?

I'll check the FreeFile function!

Quote:

---

Originally Posted by MartinLiss

I can't seem to find a frame named SaveAsTarget. What form is it on?

I also need complete, step by step, instructions on how to reproduce the problem.

---

Hi!

There is no frame named SaveAsTarget. I mixed terminology. There are FORMS frmSaveAsTarget and other.

All the steps for the user:

1. connecting the measuring instrument to computer
2. starting the application and choosing connecting parameters in form frmSetup
3. connecting instr with the application by pressing the "Go Online" button (here is the file being created)
4. pressing "Define Target" button and entering data about target in form frmSaveAsTarget
5. measuring with instr by pressing "Measure" button
6. saving the measures from instr that are in form frmMeasurement AND data from form frmSaveAsTarget by pressing "SaveTarget" button
7. ending by "Going Offline" (here is the file with data closed)

It looks like you are trying to save the data from variables with the same names in two different forms. To do that from code in frmMeasure you need to refer to the the variables in frmSetAsTarget using the form's name, for example frmSetAsTarget.TrgNa . In order to do that the variables in frmSetAsTarget need to be defined as Public. (Note that any time you want to refer to a variable on another form it has to be Public and you need to prepend the form name.)

A question I have for you is will the values for TrgNa be different? If so then what you are doing (with the addition of what I suggested above) will be okay, but if the values are the same then what you probably should do is to just have one place where TrgNa is defined and that is in a code module with the variable defined as Public. Either form can then refer directly to TrgNa without using any form name.

Yes, you're right. User changes variables from frmSaveAsTarget for each measured point so I will try this with form name!