[RESOLVED] Using embedded DLL's/Extracting .ZIP's

Hi all, another few questions.

I am using DotNetZip for use of extracting a .ZIP from the resources. When I run the standalone .EXE, errors appear about a missing DLL, so I added it into the resources via the properties panel, but I still get the same error. How do I use the embedded .DLL?

Another question, might be the wrong place to ask it but I am having problems extracting 'Conroy.zip' from my resources using DotNetZip. If anyone could show me the code or give advice, it would be greatly appreciated.

Thanks,

-Conroy.

Are you copying the DotNetZip DLL file to the same directory as your exe?

Quote:

---

Originally Posted by formlesstree4

Are you copying the DotNetZip DLL file to the same directory as your exe?

---

Yes, at the moment I am, and it works fine, but I want to send this program to other people as a standalone .EXE, hence why I am wondering how to use it as an embedded resource.

Thanks,

-Conroy

You would still have to have it present. Visual Basic isn't going to read the EXE to find the DLL, it's going to want it either in the GAC or right next to the EXE.

Alright, I will put it in the same folder when I give it out to people.

What about the DotNetZip, anyone have any knowledge of that? I thought I might ask that while I'm here. If not, I'll go onto their website and ask.

Thanks,

-Conroy

I'm not familiar with DotNetZip but I do know about reading resources out of your app using a memory stream and I doubt you can pass a memory stream to DotNetZip, which if true means you'd need to extract the zip file to the user's temp folder (you can delete it when done extracting from it) then pass the file path to the DotNetZip extract method and go from there.

Quote:

---

Originally Posted by JuggaloBrotha

I'm not familiar with DotNetZip but I do know about reading resources out of your app using a memory stream and I doubt you can pass a memory stream to DotNetZip, which if true means you'd need to extract the zip file to the user's temp folder (you can delete it when done extracting from it) then pass the file path to the DotNetZip extract method and go from there.

---

Yes, I was thinking about doing that. Thanks for the reply.

I wont 'resolve' the thread yet, I might need further assistance.

Thanks again,

-Conroy

If DotNetZip doesn't accept memory streams, that's pretty lame. I use SharpZipLib, all it wants is a stream.. doesn't care if it's a memory stream, file stream or what, as long as it is a stream. In fact, my use of it makes heavy use of memory streams, zipping and unzipping the data.

-tg

Quote:

---

Does the library support zipping to a stream? Or unzipping from a stream?
Yes, you can zip up files and Save the zip archive to a stream. As well you can Read a zip archive from an open stream - I use this for embedded resources in apps: I call GetManifestResourceStream(), and then unzip that resource. Reading and writing streams complements the capability of being able to Save to a plain file or read from a plain file. The Save-to-a-stream capability allows you to write a zip archive out to, for example, the ASP.NET Response.Output stream, without creating an intermediate file. Very nice for ASP.NET applications.

---

I just found out it does support Stream, but I am unsure how to do it. It sounds complicated and I find it easier just moving the .ZIP to a temp folder. On the other hand, if you would like to show me how Stream, be my guest. :)

Thanks,

-Conroy

Ok, so when you use the memory stream to extract the file from the resources instead of passing it to a FileStream (to write it to the hard drive) pass it to the dll for extraction.

Quote:

---

Originally Posted by JuggaloBrotha

Ok, so when you use the memory stream to extract the file from the resources instead of passing it to a FileStream (to write it to the hard drive) pass it to the dll for extraction.

---

Could you show me an example? The .ZIP is named 'Conroy.zip'.

Take a look at FileStreams at MSDN.

Code:

---

Dim fs As FileStream = Me.GetType().Assembly.GetManifestResourceStream("Conroy.zip")
Using zip1 As ZipFile = ZipFile.Read(fs)

---

Returns null, any ideas?

Something like this:

Code:

---

Using s As Stream = Me.GetType().Assembly.GetManifestResourceStream(Me.GetType(), "Conroy.zip")

'Pass "s" to the zip dll thing

End Using

---

I appreciate your help.

Code:

---

Using s As Stream = Me.GetType().Assembly.GetManifestResourceStream(Me.GetType(), "Conroy.zip")
For Each File In s
File.Extract("C:\Users\Dale\Desktop", ExtractExistingFileAction.OverwriteSilently)
Next
End Using

---

Error 1: Expression is of type 'System.IO.Stream', which is not a collection type.

s is the stream itself, you pass the stream to the dll and let the dll extract the files from the zip file.

Could you show me another example, please? Sorry to bother you, I just don't understand it.

Thanks,

-Conroy.

If you dont want to use 3rd party .ZIP tools, you can use the built in to windows, shell32.dll
check out the link in my signature about Extracting/Zipping using shell32

PS: its so much easier.

I know how to extract zip's on my hard drive, so that's not a problem, it's just using them from my resources which confuses me.

-Conroy

conroy, without me having the dll here to work with, I can't really provide any more info than I already have. Besides if you follow what's been said in this thread, it shouldn't be very difficult to pass the stream to the unzipping function (which you say it supports) and I've shown how to get the stream, so just pass it in.

I do understand that for some more experienced VS2010 VB programmers, it would be easy to understand about passing streams to the dll, but I just recently got VS2010 and have never handled dll's before. I used to use VB6 to make very simple programs, and this is a big step for me. I would appreciate more simple help. 'pass the stream to the dll' is new for me, I have no clue how to do this. If you or anyone else can simplify this down for a beginner to understand, it would be a whole lot better for me to take in and learn.

Thanks,

-Conroy

You know how to pass something to another thing, in post #15 you posted your code:
File.Extract("C:\Users\Dale\Desktop", ExtractExistingFileAction.OverwriteSilently)
Where you're trying to pass "C:\Users\Dale\Desktop" and ExtractExistingFileAction.OverwriteSilently to the File.Extract method, which is in the dll. So instead of passing "C:\Users\Dale\Desktop" to it, pass it s (the stream) instead. Though it may be a different method call that takes the stream, which I couldn't tell you any more than that because I dont have the dll, I dont know what methods (and arguments) it takes. Someone would have to send me the dll before I could answer anything else at this point.

Sent you a PM.

The function is File.Extract(TargetDir, ExtractExistingFileAction.OverwriteSilently)

OK... there is a LOT of confusion here on what is what...

http://dotnetzip.codeplex.com/

The zipped file is in a resource, correct?
OK.. so... what you need is to get a stream that contains the data of the resource, and feed it to the DotNetZip object that represents the zipped file. At this point, we aren't even to "File.Extract" level yet... so let's not worry about it.

From the CodePlex page where the project is hosted, is this sample code:

Code:

---

  Dim ZipToUnpack As String = "C1P3SML.zip" 
  Dim TargetDir As String = "C1P3SML" 
  Console.WriteLine("Extracting file {0} to {1}", ZipToUnpack, TargetDir) 
  Using zip1 As ZipFile = ZipFile.Read(ZipToUnpack) 
      AddHandler zip1.ExtractProgress, AddressOf MyExtractProgress 
      Dim e As ZipEntry 
      ' here, we extract every entry, but we could extract   
      ' based on entry name, size, date, etc. 
      For Each e In zip1 
          e.Extract(TargetDir, ExtractExistingFileAction.OverwriteSilently) 
      Next 
  End Using

---

OK... so now, let's modify that to work with a stream. PLEASE NOTE: this is untested.

vb Code:

' This creates the stream from the resource 
Using s As Stream = Me.GetType().Assembly.GetManifestResourceStream(Me.GetType(), "Conroy.zip")
    Dim TargetDir As String = "C1P3SML"  'Naturally adjust this to suit your needs.
   Using zip1 As ZipFile = ZipFile.Read(s)   'as Juggalo stated: Pass "s" to the zip dll thing
       AddHandler zip1.ExtractProgress, AddressOf MyExtractProgress   ' I'm guessing this is optional if you want to show progress....
       Dim e As ZipEntry   
       ' here, we extract every entry, but we could extract    
       ' based on entry name, size, date, etc.   
       For Each e In zip1   
           e.Extract(TargetDir, ExtractExistingFileAction.OverwriteSilently)   ' This is what will actually write your files out
       Next  
   End Using  'zip1
End Using 'Stream

By the time you get to File.Extract, you should have already read the stream to the archive file. The File.Extract has nothing to do with the stream by that point.

-tg

side note - took me less than 3 minutes to look all that info up and put it together. it isn't rocket science.

conroy, I got your PM and what TG has already posted here is what I was talking about (even though I didn't have the actual dll, nor the codeplex website to reference)

Finally, it works with that code. Hopefully I'll know in the future, thanks both of you.

-Conroy