Need simple cad program

I writing a proposal building software for a heating company. I need a free VB6 based simple program to make sketches with that can be integrated into my software. I have tried free cad and it looks like it would work well but I can't get it to work. To technical for me. I'm a bit of a nube. Does anyone know of a good simple open source program.

Here you have a list with several free choices

http://en.wikipedia.org/wiki/Compari...ditors_for_CAE
http://en.wikipedia.org/wiki/Compari...ditors_for_AEC

EDIT: Or did you mean open source in VB?

Maybe I should redefine my request. I need a cad like program, not a program for cad files. Something simple I can make simple drawings of floor plans and where the heating equipment will go.

Those are CAD programs, and some are open source/free. If you need one coded in VB, try Planet Source Code.

Hon

If those CAD programs that Baja referenced (one, I noticed, is
written in C++) do not meet your needs (especially if it is to
also be integrated with the rest of your VB app), perhaps you
could develop a "simple" one on your own.

Basically, to generate "sketches", all you'd need would be
a PictureBox control (your drawing surface). Then, you could
draw the floor plan using the Line method (alot of them !!).

Are you interested in building your own VB6 CAD app?

I'll be glad to give you some pointers along the way (but
I'm not interested in writing the whole thing for you).

Spoo

Thank you so much for the offer. I have a very big program that has to be ready for beta testing in two weeks. I'm also a newbe. If it's simple maybe I can do it but i have very little time. FreeCad makes a VB revision that i can use but it has to be installed peace by peace. I have read the web page many times and there is so much terminology I don't understand. Maybe you can turn it into simple lingo for me. From what I see it just needs to be loaded. They say it's very simple. The problem is they put so much BS filler in the instructions. Why can't they just say 1. do this 2 do this 3 do this.

Hon

Sorry to hear about your deadline.

Here is a mock-up of what I had in mind (see image below)
It involves 2 things

• a text file named Rooms.txt, and which contains room "dimensions"
• a form with a CommandButton named cbRooms and a PictureBox named PB1

Here is what the text file looks like

Code:

---

1,Room,1,0,0,12,8,-3,2,-9,-10
2,Room,2,0,10,9,2,3,8,-12,-10
3,Room,3,12,0,20,12,-10,8,-10,-8,-3,-4,3,-8
4,Room,4,22,12,10,8,-10,-8
5,HVAC,1,27,3,3,3,-3,-3

---

The "fields" (comma separated) are as follows (origin shown in red for clarity)

• 1 id number
• 2 room type
• 3 room number
• 4 origin-x
• 5 origin-y
• 6+ dimension

.. where origin is always the upper-left corner of the room, and

.. where dimension is a length. You begin at the room's origin,
and go clockwise around the room's perimeter, giving each dimension
to get you back to the origin.

• right and down are positive
• left and up are negative

Here is the code:

Code:

---

' 1. form load
Private Sub Form_Load()
    With Me
        .Top = 2000
        .Left = 1000
        .Height = 6000
        .Width = 7000
    End With
End Sub
' 2. button that starts the app
Private Sub cbRooms_Click()
    With cbRooms
        .Top = 300
        .Left = 300
    End With
    With PB1
        .Cls
        .Top = 800
        .Left = 500
        .Height = 4000
        .Width = 5000
        .Visible = True
        .AutoRedraw = True
    End With
    Dim aRMS(5, 15)    ' main array, fixed dimensions for simplicity
    ' read rooms file
    fn = "c:\VBForum Stuff\Rooms.txt"
    Open fn For Input As #1
    For ii = 1 To 5
        Line Input #1, xtr
        v1 = Split(xtr, ",")
        For jj = 1 To UBound(v1)
            aRMS(ii, jj - 1) = v1(jj)
        Next jj
        If EOF(1) Then
            Exit For
        End If
    Next ii
    Close #1
    ' plot rooms
    For ii = 1 To 5
        rtype = aRMS(ii, 0)
        rnum = aRMS(ii, 1)
        ' set line color
        If rtype = Empty Then
            Exit For
        ElseIf rtype = "Room" Then
            cc = vbBlack
        ElseIf rtype = "HVAC" Then
            cc = vbRed
        End If
        oo = 1000
        fac = 100
        ox = Val(aRMS(ii, 2)) * fac + oo
        oy = Val(aRMS(ii, 3)) * fac + oo
        For jj = 2 To 15
            ' id the origin
            If jj = 2 Then
                ZDOT ox, oy, 6, cc
                PB1.CurrentX = ox - 200
                PB1.CurrentY = oy - 200
                PB1.Print Trim(ii)
            End If
            ' plot a wall
            nxt = Val(aRMS(ii, jj + 2))
            resu = jj Mod 2
            If resu = 0 Then        ' left/right
                xx1 = ox
                xx2 = ox + nxt * fac
                yy1 = oy
                yy2 = oy
                ZLINE xx1, xx2, yy1, yy2, 1, cc
                ' reset orig
                ox = xx2
                oy = yy2
            ElseIf resu = 1 Then    ' up/down
                xx1 = ox
                xx2 = ox
                yy1 = oy
                yy2 = oy + nxt * fac
                ZLINE xx1, xx2, yy1, yy2, 1, cc
                ' reset orig
                ox = xx2
                oy = yy2
            End If
            ' exit
            If aRMS(ii, jj + 3) = Empty Then
                Exit For
            End If
        Next jj
    Next ii
End Sub
' 3. sub to draw a "dot"
Sub ZDOT(nXX1, nYY1, nDW, nCC)
    With PB1
        .DrawWidth = nDW
        PB1.PSet (nXX1, nYY1), nCC
    End With
End Sub
' 4. sub to draw a line
Sub ZLINE(nXX1, nXX2, nYY1, nYY2, nDW, nCC)
    With PB1
        .DrawStyle = 0
        .DrawWidth = nDW
        PB1.Line (nXX1, nYY1)-(nXX2, nYY2), nCC
    End With
End Sub

---

The basic steps are

• read the text file line by line, into v1 (temporary array, holds results of Split function)
• assign to main array, aRMS()
• loop through aRMS(), room-by-room, and plot its perimeter (and flag its origin)

In the image below

• rooms are shown in black
• HVAC unit is shown in red

This app is "crude", but is pretty simple.
Hope this gives you some ideas.

Spoo

.