Walk through treeview. How?

Hello guys,

am writing code that walks through treeview. i am trying to move through the treeview i.e.

when i click next it moves from parent to child if in parent, another next moves to next child, another next to next child, if at the end of the child, it moves to next parent until the end. please see the attached picture

but cant figure it out.


any help

Try this. Tested on this type of structure & worked well. Nodes were not added in topographical order either; just like in real life where the child nodes may be added well after the parent nodes have been added.
Attachment 75882
1. Use a timer for testing, set its interval about 1/2 second
2. Ensure TreeView1.HideSelection = False
3. Ensure the root node is selected first then enable the timer

Code:

---

Private Sub Timer1_Timer()

    Dim tNode As Node
    Set tNode = TreeView1.SelectedItem
   
    If tNode.Children Then ' has child nodes; move to 1st child
        Set tNode = tNode.Child.FirstSibling
    ElseIf tNode.Next Is Nothing Then ' gotta move up level(s)
        Set tNode = tNode.Parent
        Do Until tNode Is Nothing  ' if Nothing, then done
            If Not tNode.Next Is Nothing Then
                Set tNode = tNode.Next
                Exit Do
            End If
            Set tNode = tNode.Parent ' move up again
        Loop
    Else
        Set tNode = tNode.Next ' move to next sibling
    End If
   
    If tNode Is Nothing Then
        ' keep looping around & around until you stop the timer
        Set TreeView1.SelectedItem = TreeView1.Nodes(1).Root
    Else
        Set TreeView1.SelectedItem = tNode
    End If
End Sub

---

The code is set to go around & around from top to bottom, again and again. While it is running, you can click on any node to set the current starting position.

Sorry to be dense, but Bill Clinton would have asked exactly what exactly "it" is...

Quote:

---

when i click next it moves

---

The highlight, the selection or the node? The up/down arrow keys work nicely for selection, and Volpe's code appears sufficient for emulating their behavior (...although if you are relying on mouse imput, why not just select the desired node with the mouse?)

This leads me to wonder if you might want to move the node up and down. That's not so easy, but the attached demo shows that it is possible. As written, however, nodes won't leave their original family -- but there's no reason why that couldn't be worked out as well.

Quote:

---

Originally Posted by FredZone

Sorry to be dense, but Bill Clinton would have asked exactly what exactly "it" is...



The highlight, the selection or the node? The up/down arrow keys work nicely for selection, and Volpe's code appears sufficient for emulating their behavior (...although if you are relying on mouse imput, why not just select the desired node with the mouse?)

This leads me to wonder if you might want to move the node up and down. That's not so easy, but the attached demo shows that it is possible. As written, however, nodes won't leave their original family -- but there's no reason why that couldn't be worked out as well.

---

What i simply want is to move the treeview selection from parent -> child -> subchild -> parent and so on.

Am not moving the node, just selection. when i select anything child or parent in the treeview, I display associated data in a textbox.

Got it?

@LaVolpe Thanks

but can u help me one more time

1. i don't want to loop a single parent
2. i would want the next selection highlighted and if it has children, expanded

in the down arrow see d code i inserted there

Code:

---

If ndNode.Children Then ' has child nodes; move to 1st child
                Set ndNode = ndNode.Child.FirstSibling
                ndNode.EnsureVisible
                ndNode.Expanded = True
            ElseIf ndNode.Next Is Nothing Then ' gotta move up level(s)
                Set ndNode = ndNode.Parent.Next
            Else
                Set ndNode = ndNode.Next ' move to next sibling
            End If

---

I'm not following, can you use the Image in post #2 above and describe the scenario with that image? Example> Start at "Mom" move to ... then to if ...

Quote:

---

Originally Posted by LaVolpe

I'm not following, can you use the Image in post #2 above and describe the scenario with that image? Example> Start at "Mom" move to ... then to if ...

---

on pressing down arrow button, program starts (and selects) mom if no current selection or from current selection.

on pressing down again, program moves selection to first child if mom has children or moves to aunt if no children.

if down is pressed again it moves selection to next child, or child children if it has any and so on.

if down is pressed if at end of child, it moves to aunt or next parent

Hope you got it now

thanks 4 ur help

Still got a misconnect between you & me. :(

:: From Mom

:: on pressing down again, program moves selection to first child if mom has children or moves to aunt if no children.
-- the code I posted does that, no?

:: if down is pressed again it moves selection to next child, or child children if it has any and so on.
-- the code I posted does that, no?

:: if down is pressed if at end of child, it moves to aunt or next parent
-- the code I posted does that, no?

So I guess the better question is what specific scenario failed with the posted code?

I'd have to recreate the tree to play with it, but I am assuming you already tried what I posted with a timer? If so, you will have also seen that when moving to an unexpanded node, the node self-expands.

Hmmm, are you placing that code in the treeview's KeyDown event?
If so, add the exact code I posted (changing Treeview1 to your treeview's name) and append this line at the end:
:: KeyCode = 0

Quote:

---

Originally Posted by LaVolpe

Still got a misconnect between you & me. :(

:: From Mom

:: on pressing down again, program moves selection to first child if mom has children or moves to aunt if no children.
-- the code I posted does that, no?

:: if down is pressed again it moves selection to next child, or child children if it has any and so on.
-- the code I posted does that, no?

:: if down is pressed if at end of child, it moves to aunt or next parent
-- the code I posted does that, no?

So I guess the better question is what specific scenario failed with the posted code?

I'd have to recreate the tree to play with it, but I am assuming you already tried what I posted with a timer? If so, you will have also seen that when moving to an unexpanded node, the node self-expands.

---

Thanks for the quick respons, but your code uses a timer, and it loops the treeview. what i want if you could help me out is to do the moving of selection only when i click down or up arrow

you code works fine, but can seem to figure it out for my solution

thanks again

I posted just before you. Read my previous reply.

Quote:

---

Originally Posted by LaVolpe

Hmmm, are you placing that code in the treeview's KeyDown event?
If so, add the exact code I posted (changing Treeview1 to your treeview's name) and append this line at the end:
:: KeyCode = 0

---

am not placing ther code in the treeview keydown event. if you look at post #1, you'll see in that picture that i have two blue arrow button (up and down). its actually a toolbar. so i place the code in the toolbar button press event

Ok, post your complete click/keydown event for the down arrow please. The code I posted should still work just fine, whether a timer is calling it or your click event is calling it, makes no difference. I think it is something else.

ok let me do som troubleshooting, i'll get back to you. thanks for your ideas

Ok, your up-arrow code will be different. Here's something that I think will work.

Code:

---

    Set tNode = TreeView1.SelectedItem
    If tNode.Previous Is Nothing Then
        Set tNode = tNode.Parent
    Else
        Set tNode = tNode.Previous
        Do Until tNode Is Nothing
            If tNode.Children Then
                Set tNode = tNode.Child.LastSibling
            Else
                Exit Do
            End If
        Loop
    End If
    If Not tNode Is Nothing Then Set TreeView1.SelectedItem = tNode

---

@LaVolpe thanks i tried your code. the "up" works but, it does not expand the highlighted
node. the "down" dosent work. pls can you hlp me one more time.

vb Code:

Case "down"
            Set ndNode = trvMain.SelectedItem
            If ndNode.Next Is Nothing Then
                Set ndNode = ndNode.Parent
            Else
                Set ndNode = ndNode.Next
                Do Until ndNode Is Nothing
                    If ndNode.Children Then
                        Set ndNode = ndNode.Child.LastSibling
                    Else
                        Exit Do
                    End If
                Loop
            End If
            If Not ndNode Is Nothing Then Set trvMain.SelectedItem = ndNode
 
        Case "up"
            Set ndNode = trvMain.SelectedItem
            If ndNode.Previous Is Nothing Then
                Set ndNode = ndNode.Parent
            Else
                Set ndNode = ndNode.Previous
                Do Until ndNode Is Nothing
                    If ndNode.Children Then
                        Set ndNode = ndNode.Child.LastSibling
                    Else
                        Exit Do
                    End If
                Loop
            End If
            If Not ndNode Is Nothing Then Set trvMain.SelectedItem = ndNode

Well, take no offense, but I already provided the code that appears to work for the Down method in post #2. If you don't want to use it, that is up to you.

Regarding the "up" not expanding? I couldn't reproduce the problem on my end, but it could be this simple tweak?
:: before Set ndNode = ndNode.Child.LastSibling
:: add ndNode.Expanded = True