VB.Net client/server file transfer

Hi I am using this as an guideline for my client/server: http://www.vbforums.com/showthread.php?t=502795

I was wondering if there is an example on how to do a file transfer client to server and back?

I did a few searches but couldn't find anything, could be my search tags weren't exact enough.:(

I've never tried it but I think as you are already just sending and receiving Bytes using that method that is in that thread you linked to then all you would need to do is get the Byte representation of the file and just send that in the same way as anything else.
So for example you could open a FileStream to the file you want to send and then just call the Read or ReadByte method on the FileStream to fill up a Byte array with the data from the file, then send that Byte array in the same way you would send any other message.

Thanks for the help.

Wondering if the File.ReadAllBytes() would work just as well?

The way I am sending info to the server is sending some kind of identifier to tell what kind of message it is. Like "m|abc123" Would mean the client sent a chat message of abc123. How would I incorporate that into sending the file? Like.."f|bytes"
That way the server would know everything after f| is part of a file?

yeah ReadAllBytes is probably a lot easier :) totally forgot that existed...
and yeah thats how I would do it, just use an identifier at the start of each message, so your receiving server would split the string on the first instance of the | character and then process the message based on the characters found before that.

I am unsure on how to add the string to the byte array.
I have my readallbytes into the byte array, but how would I add say "f|" at the very beginning converting the string to byte format?

You can convert a string to bytes using System.Text.Encoding.ASCII.GetBytes (or something like that)

Hm, I send the bytes and everything, but when I display the info the server is receiving it is always shown as: "System.Byte[]"

I have tried the encoding getstring but it just displays System.Byte[] always. Any ideas on what I am doing wrong?

Are you sure you are using GetString correctly? Its a function so it will return the resulting string, not convert the original byte array (but I'm guessing you already know that). Can you post the relevant parts of your code here for us to take a look at?

I am most likely not understanding on how to use something properly, here's exactly what I am doing:

Client side I am sending a simple text file that says test 101 inside of it.

vb Code:

Dim b As Byte() = File.ReadAllBytes(txtFile.Text)
sw.Write("f|")
sw.Write(b)
sw.Write("|" & EndChr & ControlChars.Cr)
sw.Flush()

Server side I get the data and do this just for testing:

vb Code:

Dim message As String = System.Text.Encoding.UTF8.GetString(readBuffer, 0, bytesRead)
MsgBox(message)

It says

Code:

---

"f|System.Byte[]|~:

---

The beginning and end of it is good just the system.byte[] I need to figure out what to do with it.
Now if I dont send the f| and everything, just the byte array itself and when I receive it server side and do a file.writeallbytes it will write System.Byte[] to the file and not the actual data.

Do I have to do some kind of conversion or something to the data that is displaying System.Byte[]? I'm doing something wrong or missing something, but unsure of what that is.

I'm assuming your "sw" object is of type StreamWriter? Change it to type NetworkStream (use the TcpClient.GetStream method to return a NetworkStream for the current connection) and then you can use the WriteByte method :)

Ok, I have got everything working and updated.

Right now I am just using File.ReadAllBytes and sending it all instantly with a BinaryWriter.

How would I go about determining the speed of the upload and how much is currently uploaded? Basically..a progress bar telling me how far along the upload is (if it is a larger file).

Quote:

---

Originally Posted by Disyne

Ok, I have got everything working and updated.

Right now I am just using File.ReadAllBytes and sending it all instantly with a BinaryWriter.

How would I go about determining the speed of the upload and how much is currently uploaded? Basically..a progress bar telling me how far along the upload is (if it is a larger file).

---

In order for you to do this, I believe you must do something that I still think you should, and that is read and send portions of the file continuously.
Create a buffer (array of bytes) of say 8192 bytes.
Open a FileStream to the file you are intending to send, and then just do the following until you reach the end of the FileStream:

1. Fill the buffer up as much as possible with data from the FileStream, possibly using its Read method. Note that the Read method also returns an integer telling you exactly how much bytes where actually read. It is not always so that the buffer will be completely filled.

2. Write the bytes that was placed in the buffer, to the NetworkStream, using the BinaryWriter.

3. Keep track of how much you've sent so far. Report progress if you'd like. Though it may be too frequent to report progress for each 8192 bytes sent, so you might want to consider making the buffer larger, or just keeping track so that you are not reporting progress every iteration.


The reason I think you should've done something like this in the first place is that in case of really large files, you would'nt be hogging up memory by reading it all into a byte array, then sending it.

I have made a new class for the client side called FileUpload:

vb Code:

Imports System.IO
Public Class FileUpload
    Public PB As ProgressBar
    Public FilePath As String
    Public FileName As String
    Private fs As FileStream
    Private BYTES_TO_READ As Integer = 10000
    Private buffer(BYTES_TO_READ) As Byte
    Private totalRead As Integer = 0
 
    Public Sub FileUpload()
        fs = New FileStream(FilePath, FileMode.Open)
        If fs.CanRead Then
            SendServer("UPLO", FileName, fs.Length)
            Do Until totalRead = fs.Length
                totalRead += fs.Read(buffer, 0, BYTES_TO_READ)
                SendRaw(buffer)
                ProgressSet(totalRead / fs.Length * 100)
            Loop
        End If
        fs.Close()
    End Sub
 
    Public Delegate Sub ProgressSetInvoker(ByVal value As Integer)
    Public Sub ProgressSet(ByVal value As Integer)
        If PB.InvokeRequired Then
            PB.Invoke(New ProgressSetInvoker(AddressOf ProgressSet), value)
        Else
            PB.Value = value
        End If
    End Sub
End Class

It (visually) seems to be working.

Now server side, it is receiving my identifier command "UPLO" and the name and size of the file being sent. I then order the server to ReadBytes the amount of the filesize.

d is the filename.
d2 is the filesize in bytes.

It is not not going past bw.ReadBytes(d2)
I am unsure what I am doing wrong.

vb Code:

Case "UPLO"
d = bw.ReadString()
d2 = bw.ReadInt32()
Dim bdata() As Byte = bw.ReadBytes(d2)
File.WriteAllBytes(UsersDir & Username & "\" & d, bdata)

Here are the SendRaw and SendServer subs:

vb Code:

Public Sub SendServer(ByVal command As String, ByVal ParamArray data() As String)
        Dim bw As IO.BinaryWriter
        Dim b As Byte() = System.Text.Encoding.UTF8.GetBytes(command)
        Try
            SyncLock client.GetStream
                bw = New IO.BinaryWriter(client.GetStream)
                bw.Write(b)
                For i As Integer = 0 To UBound(data)
                    bw.Write(data(i))
                Next
                bw.Flush()
            End SyncLock
        Catch ex As Exception
            MessageBox.Show(ex.ToString)
        End Try
    End Sub
 
    Public Sub SendRaw(ByVal data() As Byte)
        Dim bw As IO.BinaryWriter
        Try
            SyncLock client.GetStream
                bw = New IO.BinaryWriter(client.GetStream)
                bw.Write(data)
                bw.Flush()
            End SyncLock
        Catch ex As Exception
            MessageBox.Show(ex.ToString)
        End Try
    End Sub

I have had some progress it seems.

This is the server side part that handles the upload from the client:

d = filename
d2 = file size in bytes

vb Code:

d = bw.ReadString()
                        d2 = bw.ReadString()
                        Dim read As Integer = 0
                        Dim totalRead As Integer = 0
                        Dim bdata(10000) As Byte
                        Dim fs As FileStream = File.Create(UsersDir & Username & "\" & d)
                        Do Until totalRead = d2
                            read = Me.mClient.GetStream.Read(bdata, 0, 10000)
                            totalRead += read
                            fs.Write(bdata, 0, read)
                        Loop

This is the client side part that handles the upload:

vb Code:

Public Sub FileUpload()
        fs = New FileStream(FilePath, FileMode.Open)
        If fs.CanRead Then
            SendServer("UPLO", FileName, fs.Length.ToString)
            Do Until totalRead = fs.Length
                read = fs.Read(buffer, 0, BYTES_TO_READ)
                totalRead += read
                ReDim sendBuffer(read - 1)
                Array.Copy(buffer, sendBuffer, read - 1)
                SendRaw(sendBuffer)
                ProgressSet(totalRead / fs.Length * 100)
            Loop
        End If
        fs.Close()
    End Sub

The server receives the total amount of bytes that it should, but say if I upload an image. The server will receive it and make the file and the size will be the same on the client side, but the image will be partially correct other parts will be discolored or distorted.

Now if I sent a .txt file the server will receive all the text inside of it, but the last character will be replaced with a space.

So say I sent a .txt file with the following inside : "test 123"
The server would write to the .txt "test 12 "
Always a space as the last character.

bump