[RESOLVED] Graphics problems

hi.
i have the code for the graphics effects, but i can't implant. because i can see errors. use the teste project(that is in of my group project) for see the problems. tell me if you can enter in my group project.
thanks

hello again Joaquim.
If you open Group1.vbg with notepad you see something like this

Code:

---

VBGROUP 5.0
StartupProject=..\..\..\..\..\..\Documents and Settings\Joaquim\Os meus documentos\Visual Basic 6.0\Objectos\Sprite\teste.vbp
Project=pjtSprite.vbp

---

It should be more like this

Code:

---

VBGROUP 5.0
StartupProject=teste.vbp
Project=pjtSprite.vbp

---

There are similar problems with teste.vbp and pjtSprite.vbp
I think you can fix this by going through the project and resaving all the different compontants, use SaveAs. Then check to see if that corrects all the pathnames.

hi.
you have right in everything. but i don't know do what is needed.
1-if i change the groupproject i don't have problems;
2-if i change the teste.vbp and pjtSprite.vbp and load the group project i recive errors;
3-i try "save group as" but continue with same path error.
can you help me more?
thanks

ok now i think that is resolved... i think that you can open it without a problems...
heres the group project updated....
now(tomorrow) i think that we can work... i'm so sorry and thanks

Okay, so this version loads up with no problems...

Can you see the small window in the attached picture? Is it supposed to be there? This window is modal and won't close unless I use ctrl/break which in turn messes everything up. The only way to stop the project is via the taskmanager. Nothing in the main window can be clicked.

There seems to be a problem with the subclassing you are using, do you know an easy way to disable it?

yes is these window. for close these window i, always, use the close window button(teste form). i never use the close IDE button, is why you recive 1 error message in debug window.
for that messagebox appear, you use the joystick, right?
did you teste the graphics effects with every type images?

thanks

maybe that window is an error. in form code delete theses lines:

Code:

---

Private Sub Sprite1_Joystick(JoystickNumber As Long, JoystickDirection As pjtSprite.Direction, JoystickButton As Long)
    If JoystickButton <> 0 Then MsgBox JoystickButton
    If JoystickDirection <> DirectionNone Then MsgBox JoystickDirection
End Sub

---

i don't recive that messagebox. only if i use a joystick. but delete theses lines, maybe resolve the problem.
thanks

i found that window problem. in usercontrol there is 1 timer control tmrnewevents. here there is 2 sections(events): 1 for control move and other
for joystick. in joystick section is the error. if you want you can change these line:

Code:

---

If (blnJoystickActivate = True And StartJoystick(0) = True) Then

---

Yes that has solved the problem, the close button now works and the animations run. I don't have a joystick.

Here is a table showing whats working and whats not.

Code:

---

Source                Mirror        Rotate        GreyS        50%Alpha
           
Gif                Yes        Yes*        Yes        No
Cursor                No        No        No        No
Bmp Strip        No        Yes*        Yes        No
Bmp                No        No        Yes        No

---

*The rotation degrades with the sprite/sheet and does not resize the image, so bits are cut off.

Quote:

---

Originally Posted by Milk

Yes that has solved the problem, the close button now works and the animations run. I don't have a joystick.

Here is a table showing whats working and whats not.

Code:

---

Source                Mirror        Rotate        GreyS        50%Alpha
           
Gif                Yes        Yes*        Yes        No
Cursor                No        No        No        No
Bmp Strip        No        Yes*        Yes        No
Bmp                No        No        Yes        No

---

*The rotation degrades with the sprite/sheet and does not resize the image, so bits are cut off.

---

yes the rotate function don't resize the control.
now my problem is why the graphics effects(except the alpha, these one i don't know why it does these) works in some images and others no?
thanks

I'm finding lots of little problems and I'm not sure I have time to run through all this.

Whilst developing a program it's a good idea to disable any subclassing as it makes debugging hard. I suggest you disable it until you have resolved all the problems.

There is a problem with the animated cursor class, you should always destroy graphics objects when you have finished with them...

Code:

---

Private Declare Function DestroyCursor Lib "user32" (ByVal hCursor As Long) As Long

---

And you are creating 480x480 pixel pictureboxes, which is why it won't rotate properly.

When rotating images some information is lost, if you rotate an image several times the image will degrade. You should keep a copy of the original and rotate from that, it will improve the quality.

You can't use Alphablend like you are. When you use Alphablend it blends the source image with the background image which in this case is the maskcolour of the control.

I hate to say this, but I think your overall concept might be flawed. A usercontrol is a very heavy way to handle a sprite. I doubt that it will perform well with any more than a handful of sprites. A Sprite class (not control) that renders to a target hDC using either BitBlt or AlphaBlend should be able to handle several hundred animated sprites with no problems.

"I'm finding lots of little problems and I'm not sure I have time to run through all this."
if you don't have time, that's ok... thanks for help me...

"Whilst developing a program it's a good idea to disable any subclassing as it makes debugging hard. I suggest you disable it until you have resolved all the problems."
how i can disable a subclass? i honly do that(i think) when the sprite control is terminate or when is used a Destroy method.

"There is a problem with the animated cursor class, you should always destroy graphics objects when you have finished with them...

Code:

---

Private Declare Function DestroyCursor Lib "user32" (ByVal hCursor As Long) As Long

---

"
ok i just did that change...

Code:

---

Option Explicit

Private Declare Function LoadCursorFromFile Lib "user32" Alias _
    "LoadCursorFromFileA" (ByVal lpFileName As String) As Long
Private Declare Function DrawIconEx Lib "user32" (ByVal hdc As Long, ByVal xLeft As Long, ByVal yTop As Long, ByVal hIcon As Long, ByVal cxWidth As Long, ByVal cyWidth As Long, ByVal istepIfAniCur As Long, ByVal hbrFlickerFreeDraw As Long, ByVal diFlags As Long) As Long
Private Declare Function DestroyCursor Lib "user32" (ByVal hCursor As Long) As Long

Const DI_MASK = &H1
Const DI_IMAGE = &H2
Const DI_DEFAULTSIZE = &H8
Const DI_NORMAL = DI_MASK Or DI_IMAGE Or DI_DEFAULTSIZE

Public Function AnimatedCursor(AniFilePath As String, picDestany As Variant)
    Dim lngNewCursor As Long
    Dim result As Long
    Dim i As Long
    If picDestany.Count > 1 Then
        For i = 1 To picDestany.Count - 1
            Unload picDestany(i)
        Next i
    End If
    picDestany(0).Cls
    i = 0
    lngNewCursor = LoadCursorFromFile(AniFilePath)
    Do
        If i > 0 Then Load picDestany(i)
        result = DrawIconEx(picDestany(i).hdc, 0, 0, lngNewCursor, 32, 32, i, 0, DI_NORMAL)
        picDestany(i).Width = 32 * Screen.TwipsPerPixelX
        picDestany(i).Height = 32 * Screen.TwipsPerPixelY
        If UCase(AniFilePath) Like "*.CUR" Then Exit Do
        i = i + 1
    Loop Until result = 0
    Unload picDestany(i - 1)
    DestroyCursor lngNewCursor
End Function

---

"And you are creating 480x480 pixel pictureboxes, which is why it won't rotate properly." i don't hunderstand what you said... :(

"When rotating images some information is lost, if you rotate an image several times the image will degrade. You should keep a copy of the original and rotate from that, it will improve the quality." thanks for the information.
i was thinking put 1 method for restore the image(s).

"You can't use Alphablend like you are. When you use Alphablend it blends the source image with the background image which in this case is the maskcolour of the control." why?

"I hate to say this, but I think your overall concept might be flawed. A usercontrol is a very heavy way to handle a sprite. I doubt that it will perform well with any more than a handful of sprites. A Sprite class (not control) that renders to a target hDC using either BitBlt or AlphaBlend should be able to handle several hundred animated sprites with no problems."
i'm using a picturebox array for put the images/subimages and the usercontrol for show it(with help of a timer, if theres is more than 1 subimage).

thanks for everything

for AniGif and clsAnimatorCursor, did you think that is better a module(and maybe resolve that error, when we click in close IDE button)?
these is the error message when we click in close IDE button:"Object variable or With block variable not set"
thanks

Code:

---

picDestany(i).Width = 32 * Screen.TwipsPerPixelX

---

should be

Code:

---

picDestany(i).Width = 32

---

The scalemode is already set to pixels so 32 * Screen.TwipsPerPixelX = 480
It also assumes the animated cursor is 32x32 pixels which I don't think is always the case. This should be in a module as you only need one instance of it.

Quote:

---

Originally Posted by Joaquim

i'm using a picturebox array for put the images/subimages and the usercontrol for show it(with help of a timer, if theres is more than 1 subimage).

---

An array of pictureboxes is unnecessary and a waste of resources, an array of stdPictures would be less wasteful. Its still not a great way to show animations, direct rendering from a sprite sheet to the target device context is the most efficient way.

To use AlphaBlend properly you will need to pass it the hDC of the control that your sprite control lies in, otherwise it has nothing to blend it with. You would need to use AlphaBlend each time you wanted to render a frame. What you are trying to do simply won't work, it won't ever be transparent.

"

Code:

---

picDestany(i).Width = 32 * Screen.TwipsPerPixelX

---

should be

Code:

---

picDestany(i).Width = 32

---

The scalemode is already set to pixels so 32 * Screen.TwipsPerPixelX = 480"
i did the changes.

"It also assumes the animated cursor is 32x32 pixels which I don't think is always the case."
but the problem is that i don't know how can i see the real size of image.

"This should be in a module as you only need one instance of it."
i change theses classs, animtor cursor and gif animator, for a module.


"An array of pictureboxes is unnecessary and a waste of resources, an array of stdPictures would be less wasteful. Its still not a great way to show animations, direct rendering from a sprite sheet to the target device context is the most efficient way."
for these i must use hdc's(i don't know use it), but i only can do these for animator cursors. because the gif animtor is different.

"To use AlphaBlend properly you will need to pass it the hDC of the control that your sprite control lies in, otherwise it has nothing to blend it with. You would need to use AlphaBlend each time you wanted to render a frame. What you are trying to do simply won't work, it won't ever be transparent."
if i hunderstand, i must do directly with usercontrol, right?

i'm sorry if i'm bored you with so many work... i'm sorry and thanks

here you go, this finds out the cursors size

Code:

---

Option Explicit

Private Type tICONINFO
    StructureSize As Long
    IsIcon As Long
    XHotspot As Long
    YHotspot As Long
    hBmpMask As Long
    hBmpColour As Long
End Type

Private Type tBITMAP '24 bytes
    bmType As Long
    bmWidth As Long
    bmHeight As Long
    bmWidthBytes As Long
    bmPlanes As Integer
    bmBitsPixel As Integer
    bmBits As Long
End Type

Private Declare Function LoadCursorFromFile Lib "user32" Alias "LoadCursorFromFileA" (ByVal lpFileName As String) As Long
Private Declare Function DrawIconEx Lib "user32" (ByVal hdc As Long, ByVal xLeft As Long, ByVal yTop As Long, ByVal hIcon As Long, ByVal cxWidth As Long, ByVal cyWidth As Long, ByVal istepIfAniCur As Long, ByVal hbrFlickerFreeDraw As Long, ByVal diFlags As Long) As Long
Private Declare Function DestroyCursor Lib "user32" (ByVal hCursor As Long) As Long
Private Declare Function GetIconInfo Lib "user32" (ByVal hIcon As Long, Info As tICONINFO) As Long
Private Declare Function GetObjectA Lib "gdi32" (ByVal hObject As Long, ByVal nCount As Long, lpObject As Any) As Long

Const DI_MASK = &H1
Const DI_IMAGE = &H2
Const DI_DEFAULTSIZE = &H8
Const DI_NORMAL = DI_MASK Or DI_IMAGE Or DI_DEFAULTSIZE

Public Function AnimatedCursor(AniFilePath As String, picDestany As Variant)
    Dim lngNewCursor As Long
    Dim result As Long
    Dim i As Long
    Dim IconInfo As tICONINFO
    Dim BmpInfo As tBITMAP
   
    If picDestany.Count > 1 Then
        For i = 1 To picDestany.Count - 1
            Unload picDestany(i)
        Next i
    End If
    picDestany(0).Cls
    i = 0
    lngNewCursor = LoadCursorFromFile(AniFilePath)
    If lngNewCursor Then
     
      GetIconInfo lngNewCursor, IconInfo
      GetObjectA IconInfo.hBmpMask, 24, BmpInfo
     
      Do
          If i > 0 Then Load picDestany(i)
          result = DrawIconEx(picDestany(i).hdc, 0, 0, lngNewCursor, BmpInfo.bmWidth, BmpInfo.bmHeight, i, 0, DI_NORMAL)
          picDestany(i).Width = BmpInfo.bmWidth
          picDestany(i).Height = BmpInfo.bmHeight
          picDestany(i).Picture = picDestany(i).Image
          If UCase(AniFilePath) Like "*.CUR" Then Exit Do
          i = i + 1
      Loop While result
     
      DestroyCursor (lngNewCursor)
    End If
    Unload picDestany(i - 1)
End Function

---

thank you very much... thank you my friend... thanks...
why, when i rotate the image, the cursor and the normal image stay like transparent(some pixels desappear)?
yes after some changes i can do somethings with graphics effects.
thanks

heres the project updated...
i change the mousehover and mouseleave events. now it's great... for mousehover i use another timer control and 1 property for control the timer.
i enable the mousehover timer, mouseleave and mouseenter events with mousemove event.
thanks