Searching with a list box instead of a textbox.

Hey guys I have a sub that searches for registry keys I enter in a textbox its caled text1.

The sub that scans is this ..

VB Code:

Private Sub SearchRegMachine()
  Dim i As Integer
    Dim lngKeyHandle As Long
    Dim lngResult As Long
    Dim lngCurIdx As Long
    Dim strValue As String
    Dim lngValueLen As Long
    Dim strClass As String
    Dim lngClassLen As Long
    Dim strResult As String
    Dim lngTime As FILETIME
    Dim strSearch As String
    Dim intSearchLen As Integer
    Dim blnMatch As Boolean
    
    
     'PlaySound App.path & "\StartReg.WAV", ByVal 0&, SND_FILENAME Or SND_ASYNC
    i = 0
    ' Clear the current results
    
    ' Assign the new string to search for
    strSearch = Text1.Text
    intSearchLen = Len(strSearch)
    
    ' Open the Root Branch to search
    lngResult = RegOpenKeyEx(strBranch, _
            "", _
             0&, _
             KEY_READ, _
             lngKeyHandle)
    
    If lngResult <> ERROR_SUCCESS Then
        MsgBox "Cannot open key.", , "Search Registry Keys"
    Else
    ' If the Root branch can be opened, disable
    ' the buttons and begin the search
        startscanregbutton.Enabled = False
       ' Command2.Enabled = False
        listreg.Enabled = False
        Reg.MousePointer = 11
        
        lngCurIdx = 0
        Do
            lngValueLen = 2000
            strValue = String(lngValueLen, 0)
            lngClassLen = 2000
            strClass = String(lngClassLen, 0)
        
            ' Enumerate all the sub keys
            lngResult = RegEnumKeyEx(lngKeyHandle, _
                 lngCurIdx, _
                 ByVal strValue, _
                 lngValueLen, _
                 0&, _
                 ByVal strClass, _
                 lngClassLen, _
                 lngTime)
           
            ' Increment the index of found keys
            lngCurIdx = lngCurIdx + 1
        
            If lngResult = ERROR_SUCCESS Then
                ' Trim the current key to its actual length
                strResult = Left(strValue, lngValueLen)
                
                ' Eliminate case if the search is insensitive
                blnMatch = False
                strValue = strResult
                If Check1.Value = 0 Then
                    strResult = LCase(strResult)
                    strSearch = LCase(strSearch)
                End If
 
                ' Compare strings based upon search type
                Select Case Combo2.ListIndex
                    Case 0
                        ' Check if any portion of the search string is found.
                        If InStr(strResult, strSearch) Then blnMatch = True
                    Case 1
                        ' Check if an exact match is found.
                        If strResult = strSearch Then blnMatch = True
                    'Case 2
                        ' Check if the search string matches the
                        ' left portion of the key string.
                       ' If Left(strResult, intSearchLen) = strSearch Then blnMatch = True
                   ' Case Else
                        ' Check if the search string matches the
                        ' right portion of the key string.
                        'If Right(strResult, intSearchLen) = strSearch Then blnMatch = True
                End Select
                
                ' Populate the list with keys that match
                ' the search criteria
                If blnMatch Then
                    i = i + 1
                    listreg.AddItem strValue
                End If
            End If
        
        ' Keep looking for more keys
        Loop While lngResult = ERROR_SUCCESS
        ' Close the Root Branch
        lngResult = RegCloseKey(lngKeyHandle)
    
        ' Enable the buttons
        Reg.MousePointer = 0
        listreg.Enabled = True
        startscanregbutton.Enabled = True
      '  Command2.Enabled = True
        
        ' Display the total matches
        
    
        Label3.Caption = Str(i) & " Possible Problematic Registry Keys"
       
        Text4.Text = "Scanning Complete" & Str(i) & " Possible Problematic Registry Keys Detected."
    End If
 End Sub

Now basically what it does is searches for registry keys that are inputed in text1 and ptus the result in listreg.

Now is there a way to change it so instead of searching for one at a time in a textbox, it searchs from keys loaded to a listbox one at a time.

Can anyone tell me how to do that?

Thanks!

a simple change can do it

Change the sub header to

Code:

---

Private Sub SearchRegMachine(Byval strSearch as String)

---

Remove the
Dim strSearch As String and strSearch = Text1.Text within the sub.

say you list is list1

Code:

---

Dim i As Long
   
    For i = 0 To list1.ListCount - 1
        SearchRegMachine list1.List(i)
    Next

---

would do it

:wave:

Ok, thanks.

Umm I get an arugment not optional error when I try to call the sub.

Since the subs name changed, how would I call it now?

Quote:

---

Originally Posted by Justin M

Umm I get an arugment not optional error when I try to call the sub.

---

Look at the help for the error - it tells you that the sub/function needs more parameters than you passed to it.

Quote:

---

Since the subs name changed,

---

erm.. it was SearchRegMachine, and still is. :confused:

Quote:

---

how would I call it now?

---

See the second half of zeezee's post (from "say" onwards), it contains an example - which would not give the error you got.

I think I see what you mean, but when I go to scan the registry now I get the arrugment not optional and it highlights the code "Call SearchRegMachine"

in the block of code

VB Code:

Private Sub startscanregbutton_Click()
listreg.Clear
Text3.Text = Text3.Text & vbNewLine & "Scanning in progress...Please Wait.."
 Combo1.ListIndex = 0
 
   Call SearchRegMachine
   
   Combo1.ListIndex = 1
    Call SearchRegMachine
    
    Text3.Text = Text3.Text & vbNewLine & Text4.Text
End Sub

Of course it does - compare that line (in fact, lines 4 to 9) with zeezee's example. ;)

But his code to switch from text1 to the list was put in the sub - the SearchRegMachine

Quote:

---

Originally Posted by Justin M

But his code to switch from text1 to the list was put in the sub - the SearchRegMachine

---

Try this

Code:

---

  Private Sub SearchRegMachine()

  Dim i As Integer
    Dim lngKeyHandle As Long
    Dim lngResult As Long
    Dim lngCurIdx As Long
    Dim strValue As String
    Dim lngValueLen As Long
    Dim strClass As String
    Dim lngClassLen As Long
    Dim strResult As String
    Dim lngTime As FILETIME
    Dim strSearch As String
    Dim intSearchLen As Integer
    Dim blnMatch As Boolean
   
   
    'PlaySound App.path & "\StartReg.WAV", ByVal 0&, SND_FILENAME Or SND_ASYNC
    i = 0
    ' Clear the current results
   
    ' Assign the new string to search for
    'strSearch = Text1.Text
    Dim intListCount As Integer
    For intListCount = 0 To List1.ListCount
      strSearch = List1.List(intListCount)
        intSearchLen = Len(strSearch)
   
    ' Open the Root Branch to search
    lngResult = RegOpenKeyEx(strBranch, _
            "", _
            0&, _
            KEY_READ, _
            lngKeyHandle)
   
    If lngResult <> ERROR_SUCCESS Then
        MsgBox "Cannot open key.", , "Search Registry Keys"
    Else
    ' If the Root branch can be opened, disable
    ' the buttons and begin the search
        startscanregbutton.Enabled = False
      ' Command2.Enabled = False
        listreg.Enabled = False
        Reg.MousePointer = 11
       
        lngCurIdx = 0
        Do
            lngValueLen = 2000
            strValue = String(lngValueLen, 0)
            lngClassLen = 2000
            strClass = String(lngClassLen, 0)
       
            ' Enumerate all the sub keys
            lngResult = RegEnumKeyEx(lngKeyHandle, _
                lngCurIdx, _
                ByVal strValue, _
                lngValueLen, _
                0&, _
                ByVal strClass, _
                lngClassLen, _
                lngTime)
         
            ' Increment the index of found keys
            lngCurIdx = lngCurIdx + 1
       
            If lngResult = ERROR_SUCCESS Then
                ' Trim the current key to its actual length
                strResult = Left(strValue, lngValueLen)
               
                ' Eliminate case if the search is insensitive
                blnMatch = False
                strValue = strResult
                If Check1.Value = 0 Then
                    strResult = LCase(strResult)
                    strSearch = LCase(strSearch)
                End If

                ' Compare strings based upon search type
                Select Case Combo2.ListIndex
                    Case 0
                        ' Check if any portion of the search string is found.
                        If InStr(strResult, strSearch) Then blnMatch = True
                    Case 1
                        ' Check if an exact match is found.
                        If strResult = strSearch Then blnMatch = True
                    'Case 2
                        ' Check if the search string matches the
                        ' left portion of the key string.
                      ' If Left(strResult, intSearchLen) = strSearch Then blnMatch = True
                  ' Case Else
                        ' Check if the search string matches the
                        ' right portion of the key string.
                        'If Right(strResult, intSearchLen) = strSearch Then blnMatch = True
                End Select
               
                ' Populate the list with keys that match
                ' the search criteria
                If blnMatch Then
                    i = i + 1
                    listreg.AddItem strValue
                End If
            End If
       
        ' Keep looking for more keys
        Loop While lngResult = ERROR_SUCCESS
        ' Close the Root Branch
        lngResult = RegCloseKey(lngKeyHandle)
   
        ' Enable the buttons
        Reg.MousePointer = 0
        listreg.Enabled = True
        startscanregbutton.Enabled = True
      '  Command2.Enabled = True
       
        ' Display the total matches
       
   
        Label3.Caption = Str(i) & " Possible Problematic Registry Keys"
     
        Text4.Text = "Scanning Complete" & Str(i) & " Possible Problematic Registry Keys Detected."
    End If
    Next
 End Sub

---

Quote:

---

Originally Posted by Justin M

But his code to switch from text1 to the list was put in the sub - the SearchRegMachine

---

No it wasn't - zeezee's example (from "say" onwards) was example usage, and is the equivalent of lines 4 to 9 of your code in post #5, but without the errors.

All you needed to do was change list1 to Combo1.

Ok do you mean I add this code then

Dim ix As Long

For ix = 0 To Combo1.ListCount - 1
SearchRegMachine Combo1.List(ix)
Next


But I still get an argument not optional error when I call the SearchRegMachine sub

Hey Justin, can you post the New SearchRegMachine again.
At least the sub header ?

:wave:

Absolutely

VB Code:

Private Sub SearchRegMachine(ByVal strSearch As String)
 
        Dim i As Integer
 
     Dim lngKeyHandle As Long
 
          Dim lngResult As Long
   
          Dim lngCurIdx As Long
  
          Dim strValue As String
  
          Dim lngValueLen As Long
  
          Dim strClass As String
 
          Dim lngClassLen As Long
 
          Dim strResult As String
 
          Dim lngTime As FILETIME
 
          Dim strSearch As String
 
          Dim intSearchLen As Integer
  
          Dim blnMatch As Boolean
 
         
 
         
 
           'PlaySound App.path & "\StartReg.WAV", ByVal 0&, SND_FILENAME Or SND_ASYNC
 
          i = 0
  
          ' Clear the current results
 
         
 
          ' Assign the new string to search for
 
         'strSearch = Text1.Text
         
         Dim ix As Long
    
    For ix = 0 To Combo1.ListCount - 1
        SearchRegMachine Combo1.List(ix)
    Next
 
          intSearchLen = Len(strSearch)
  
 
          ' Open the Root Branch to search
 
          lngResult = RegOpenKeyEx(strBranch, "", 0&, KEY_READ, lngKeyHandle)
  
 
          If lngResult <> ERROR_SUCCESS Then
  
              MsgBox "Cannot open key.", , "Search Registry Keys"
  
          Else
  
          ' If the Root branch can be opened, disable
 
          ' the buttons and begin the search
 
              startscanregbutton.Enabled = False
 
             ' Command2.Enabled = False
 
              listreg.Enabled = False
 
              Reg.MousePointer = 11
 
             
 
              lngCurIdx = 0
 
              Do
 
                  lngValueLen = 2000
 
                  strValue = String(lngValueLen, 0)
 
                  lngClassLen = 2000
 
                  strClass = String(lngClassLen, 0)
  
             
 
                  ' Enumerate all the sub keys
 
                  lngResult = RegEnumKeyEx(lngKeyHandle, lngCurIdx, ByVal strValue, lngValueLen, 0&, ByVal strClass, lngClassLen, lngTimex)
  
                 
  
                  ' Increment the index of found keys
  
                  lngCurIdx = lngCurIdx + 1
  
             
  
                  If lngResult = ERROR_SUCCESS Then
  
                      ' Trim the current key to its actual length
  
                      strResult = Left(strValue, lngValueLen)
  
                     
  
                      ' Eliminate case if the search is insensitive
  
                      blnMatch = False
  
                      strValue = strResult
 
                      If Check1.Value = 0 Then
 
                          strResult = LCase(strResult)
  
                          strSearch = LCase(strSearch)
  
                      End If
  
       
  
                      ' Compare strings based upon search type
  
                      Select Case Combo2.ListIndex
  
                          Case 0
  
                              ' Check if any portion of the search string is found.
  
                              If InStr(strResult, strSearch) Then blnMatch = True
  
                          Case 1
  
                              ' Check if an exact match is found.
  
                              If strResult = strSearch Then blnMatch = True
 
                          'Case 2
  
                              ' Check if the search string matches the
  
                              ' left portion of the key string.
  
                             ' If Left(strResult, intSearchLen) = strSearch Then blnMatch = True
  
                         ' Case Else
  
                              ' Check if the search string matches the
  
                              ' right portion of the key string.
  
                              'If Right(strResult, intSearchLen) = strSearch Then blnMatch = True
  
                      End Select
  
                     
  
                      ' Populate the list with keys that match
  
                      ' the search criteria
  
                      If blnMatch Then
 
                          i = i + 1
  
                          listreg.AddItem strValue
 
                      End If
  
                  End If
  
             
 
              ' Keep looking for more keys
 
              Loop While lngResult = ERROR_SUCCESS
 
              ' Close the Root Branch
              lngResult = RegCloseKey(lngKeyHandle)
 
         
 
              ' Enable the buttons
 
              Reg.MousePointer = 0
 
              listreg.Enabled = True
 
              startscanregbutton.Enabled = True
 
            '  Command2.Enabled = True
 
             
 
              ' Display the total matches
 
             
 
         
 
              Label3.Caption = Str(i) & " Possible Problematic Registry Keys"
 
             
 
              Text4.Text = "Scanning Complete" & Str(i) & " Possible Problematic Registry Keys Detected."
 
          End If
 
       End Sub

:D
You are doing it in the wrong place.
See the Loop is inside the sub and calling the same sub. It should make your app in a infinite loop with a stack over flow ;)

Code:

---

Dim ix As Long
    For ix = 0 To Combo1.ListCount - 1
        SearchRegMachine Combo1.List(ix)
    Next

---

This should come out of the Sub SearchRegMachine

was there a place you called this sub earlier changing its header?
Thats where this should come.
For an Example, if there is a Command Button to Start the search, that's where this part should come.
Anyway, even in the place it is now, cant imagine why an Argument not Optional comes :confused:

try and see
:wave:

Ohh, the sub gets called here

VB Code:

Private Sub startscanregbutton_Click()
listreg.Clear
Text3.Text = Text3.Text & vbNewLine & "Scanning in progress...Please Wait.."
 Combo1.ListIndex = 0
 
   Call SearchRegMachine
   
   Combo1.ListIndex = 1
    Call SearchRegMachine
    
    Text3.Text = Text3.Text & vbNewLine & Text4.Text
End Sub

You see, thats why its not wroking

Code:

---

Call SearchRegMachine

---

has no arguments, Thats the reason.

Ok that event procedure should look like this

Code:

---

Private Sub startscanregbutton_Click()
    Dim ix As Long
   
    listreg.Clear
    Text3.Text = Text3.Text & vbNewLine & "Scanning in progress...Please Wait.."
   
    For ix = 0 To Combo1.ListCount - 1
        SearchRegMachine Combo1.List(ix)
    Next
   
   
    Text3.Text = Text3.Text & vbNewLine & Text4.Text
End Sub

---

few tips.

Code:

---

Label3.Caption = Str(i) & " Possible Problematic Registry Keys"
Text4.Text = "Scanning Complete" & Str(i) & " Possible Problematic Registry Keys Detected."

---

This part inside the SearchRegMachine should also come out.

In the Private Sub startscanregbutton_Click() , after the loop, put it like this

Code:

---

Label3.Caption = Str(listreg.ListCount) & " Possible Problematic Registry Keys"
Text4.Text = "Scanning Complete" & Str(listreg.ListCount) & " Possible

Problematic Registry Keys Detected."

---

Try and see
:wave:

Ok, but I get an error, that variable lngTimex is not defined inthe line of code.

VB Code:

lngResult = RegEnumKeyEx(lngKeyHandle, lngCurIdx, ByVal strValue, lngValueLen, 0&, ByVal strClass, lngClassLen, lngTimex)

this is in the searchregmachiensub

Quote:

---

that variable lngTimex is not defined inthe line of code.

---

Hmm. the Error is self explanatory. You haven't defined the variable.
Check that line against the code in your first post. You will see the difference. ;)

:wave:

Well which sub should I use, the one in my first post or the modified one.

Cause the one in the first post only scans for reg keys manually enter in text1. I would like to have it search for each item in a list2 lsitbox instead.

:D no no.
Lets resolve it like this.
We changed the sub in post #1 to the new one.
What we changed was, the sub header, and the string to search part.
Nothing else
You need the new one to search for multiple keys. right?

So this last error , is due to a change, which was not mentioned here.
And as the error says, you haven't declared the variable.
But if you compare that line with the new one, you should the spot the error.
Its pretty simple.

Don't get this wrong, I can tell exactly how to resolve the error, but since this a simple error , and you being unable to resolve that, is not good. Thats why I think its better you understand whats the error and how to resolve it. ;)
(BTW If you need to resolve it, just say, I ll tell how:D)

Cheers!

:wave:

lol i think I see the prob lngTimex is not real.

It was a typo its supposed to be lngTime

So does this mean I still need to enter keys in text1? But now I just click on a item in list2 and it goes to text1?

OK. :)

What You need is to search multiple entries right?
So what you should do is , load the required search values to the Combo box (Combo1)
Then do the search. You can remove the Text Box I think.
I cant tel this exactly without seeing the full app or at least a screen shot.
Just a hint

:wave:

Well what the combo box does is set what you search in.

Like for one instance I search in the HKEY_LOCAL_MACHINE and another time in the
HKEY_USERS

which is why I had the code

Combo1.ListIndex = 0


Combo1.ListIndex = 1
in the button code to search.

ok clarification

Quote:

---

Originally Posted by In Post #1

Now is there a way to change it so instead of searching for one at a time in a textbox, it searchs from keys loaded to a listbox one at a time.

---

this asks how to do the search for multiple values in a list box.
I am assuming that this Combo1 is the list you have mentioned,
Is that right?

:wave:

my combo1 is a drop down box.

list2 is where all the keys I want to search for are.

so the values to be searched are in list2?

so you have some registry keys in List2, and you want to search whether these keys are in the registry?

If this is true, what is Combo1?

:wave:

ITs where you can pick between to search in the HKEY_LOCAL_MACHINE OR the

HKEY_USERS

ok next question, if the Combo1 has the starting point and list1 has the keys, where do these values get used in your SearchRegMachine method?
I believe that the heart of this method is RegOpenKeyEx and RegEnumKeyEx

If that is so, in which part are these values in Combo1 and List1 are used?

Can you give an example on how you intend to use them?

:wave:

list2 has the keys

see the searchregmachine is currently set up to work with text1 which only holds 1 key at a time. I was wondering how to get it so it would search they keys in list2.

Or have it so when the scan button is pressed, each key in the list2 is put in the text1.text and each key is scanned for one at a time.

ok, i m confused :eek:

This the code for searching the list1

Code:

---

Private Sub startscanregbutton_Click()
    Dim ix As Long
   
    listreg.Clear
    Text3.Text = Text3.Text & vbNewLine & "Scanning in progress...Please Wait.."
   
    For ix = 0 To List1.ListCount - 1
        SearchRegMachine List1.List(ix)
    Next
   
   
    Text3.Text = Text3.Text & vbNewLine & Text4.Text
End Sub

---

but still, i dont know where Combo1 comes to the drama :confused:
Try above code and see if it works.

:wave:

lol the combo 1 is where you pick what part of the registry to scan, its in the scanregmachine.

that above code should be list2, i just noticed that now lol

Quote:

---

lol the combo 1 is where you pick what part of the registry to scan, its in the scanregmachine.

---

ok there is a Combo2 there, but not Combo1,
It was there and we removed it i think.

ok ok, now does it work correctly with above code changed to list2?

:wave:

It does scan I can see that.

The odd thing, which may be in the prog itself since i got this code from the microsoft webiste.

It does not pick up things.

Though I am not too sure how to format the items.

I enter things like this in list2
HKEY_CURRENT_USER\software\winspykiller mscheduledscan

or even HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main\Default_Page_Url

but it does not pick it up.

hmm.
No idea :(
Since I haven't done this Reg scan things before, I cant help you on that part.

Anyway, if thats a problem, may be you can put up another thread for that.

And If you think your original question has a solution , you may resolve the thread.

;)

:wave:

Justin: Have you read and understood the code you obtained?

I don't think it's doing what you expect and, as it is, will not work.

This call:

Code:

---

    lngResult = RegOpenKeyEx(strBranch, _
            "", _
            0&, _
            KEY_READ, _
            lngKeyHandle)

---

will fail with a Type Mismatch since it expects a Long value as opposed to a string for the Root Key,
eg one of these:

Code:

---

Private Const HKEY_CLASSES_ROOT = &H80000000
Private Const HKEY_CURRENT_CONFIG = &H80000005
Private Const HKEY_CURRENT_USER = &H80000001
Private Const HKEY_LOCAL_MACHINE = &H80000002
'
' and in your code, for example:
'
    lngKey = HKEY_CURRENT_USER
    lngResult = RegOpenKeyEx(lngKey, _
            "", _
            0&, _
            KEY_READ, _
            lngKeyHandle)

---

Also this statement

Code:

---

If InStr(strResult, strSearch) Then blnMatch = True
'
' Should be
'
 If InStr(strSearch, strResult) Then blnMatch = True

---

The code only enumerates keys one level down from the root
eg
HKEY_CURRENT_USER\Software
so if you specified
HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main\Default_Page_Url

as your search, and looked for a partial match (ie Combo2.ListIndex = 0) it would find 'Software' and insert that into the ListBox. If you performed an exact match (Combo2.ListIndex = 1) it would not find anything.

To eumerate all the way down the structure would need some fairly significant modifications to the existing code.