Help with port forwarding in winsock

Hi,

I changed the port forward settings to the folowing in my broadband router.
Here are the entries.

Name: CCL
Trigger Port: 50 - 50
Public Port: 90
Trigger Type: UDP
Public Type: UDP

I have also made a server and client application that uses winsock control, these applications communicate well with the 127.0.0.1 address.

I then changed the IP address to 192.168.1.1 (the ip address to my router-LAN address, the LAN address on my PC is through DHCP).

When I run the application I find that an error 'Run Time error 10054, the connection is reset by remote side' occurs.

Kindly advise how I can correct this I would like my server/client to run in an router environment.

Server Code:

VB Code:

Option Explicit
 
Private Sub Form_Load()
 
Winsock1.LocalPort = 50
Winsock1.RemotePort = 90
Winsock1.RemoteHost = "192.168.1.1"
Winsock1.Protocol = sckUDPProtocol
 
Winsock1.Bind Winsock1.LocalPort
 
End Sub
 
Private Sub Text1_Change()
 
Winsock1.SendData Text1.Text
 
End Sub
 
 
Private Sub Winsock1_DataArrival(ByVal bytesTotal As Long)
 
Dim m_data As String
 
Winsock1.GetData m_data
 
Label1.Caption = m_data
End Sub

Client Code:

VB Code:

Option Explicit
 
Private Sub Form_Load()
 
Winsock1.LocalPort = 90
Winsock1.RemotePort = 50
Winsock1.RemoteHost = "192.168.1.1"
Winsock1.Protocol = sckUDPProtocol
 
Winsock1.Bind Winsock1.LocalPort
 
End Sub
 
Private Sub Text1_Change()
Winsock1.SendData Text1.Text
 
End Sub
 
Private Sub Winsock1_DataArrival(ByVal bytesTotal As Long)
 
Dim m_data As String
 
Winsock1.GetData m_data
 
Label1.Caption = m_data
 
End Sub

Thanks
arunb

To be honest I don't actually know what you're trying to do... Can you elaborate?

Sorry, I am trying to use the winsock control to send/receive data from the internet . The internet connection is done through a broadband router. The applications (code for which is posted above) are used for sending and receiving data.

I was advised to use port forwarding for doing this..The router settings are also given.

thanks
arun

So someone will connect from the outside world directly into your computer?
If your computer is establishing the connection out from your computer to another host on the internet then you don't need to use port forwarding - even for the inbound data on that connection.

So how do I do connect using winsock ???
thanks

Winsock works the same, whether you're port forwarding or not.

Your problem is that you set up port triggering, not port forwarding - they're not the same thing. Set the computer the Winsock program will be running on to have a static internal IP that's outside the range of the DHCP server in the router. IOW, if the DHCP server leases .100 to .254, use an IP in the range of .2 to .99. (If the DHCP server leases .2 to .254, you're going to have to change that range in the router, because all addresses except the gateway are leased.)

Note: Some routers will forward to leased addresses, others won't. ALL routers will forward to static (non-leased) addresses, so it doesn't hurt to just set a static address, unless you know that your router will forward to a leased address. (Which will cause you problems if you ever boot the computers on the LAN in a different order - the one needing forwarding will have the wrong address.)

Now just forward whatever port(s) you're using to that address. (Use Both [TCP and UDP] unless you know which type of traffic you're looking for). This is for incoming connections - connections that your program initiates will work whether you have ports forwarded or not. (Port 80 is blocked, yet your web browser works just fine initiating connections on port 80.)

Connections from outside your router are made to your external address - the one you see when you connect to http://www.whatsmyip.org/. Connections from inside the LAN are made to your 192.168.1.<whatever> address. Some routers will loop back - do an internal connection if the address you're going to is the router's external address - some won't know how to handle the request and you'll never connect, so use the internal address from inside.