[RESOLVED] Treeview problem Urgent!!

VB Code:

Dim strKEy As String
Dim RemoteHost As String
 
 Private Sub Form_Load()
    Dim x
    Dim PCName As String
    Dim Command As String
    Dim Msg As String
    Dim i As Integer
 
 ' Declarations
    Dim intIDX As Integer
    
    ' Get List of Computers on Network (Type All: Server and Workstation)
    ServerList = EnumServer(SRV_TYPE_ALL)
    
     ' Loop through all the computers and add them to the treeview
    If ServerList.Init Then
    
        Dim rt As Node
        Dim ch As Node
        Dim strServer As String
        Dim t
        Set rt = TreeView1.Nodes.Add(, , "rootnode", "Sistem Kawalan Makmal")
      
        For intIDX = 1 To UBound(ServerList.List)
            strServer = ServerList.List(intIDX).ServerName
            t = strServer & intIDX
            Set ch = TreeView1.Nodes.Add(rt, tvwChild, t, strServer)
            rt.Expanded = True
          
        Next
           
    End If
  
 TreeView1.Nodes(1).Selected = True
   strKEy = TreeView1.SelectedItem.Key
End Sub
 
Private Sub TreeView1_MouseDown(Button As Integer, Shift As Integer, x As Single, y As Single)
Dim str
 
If strKEy <> "" Then
    If TreeView1.Nodes(strKEy).Parent Is Nothing Then
 
        If Button = 2 Then ' if the mousebutton 2 is pressed (right)
            PopupMenu Rclick ' then it calls the menu which is hidden to be shown at the cordinates of the mousepointer (x,y)
 
        Else
 
            Button = 1
            RemoteHost = TreeView1.Nodes(strKEy).Text
            sckControlPanel.RemoteHost = RemoteHost
            sckControlPanel.RemotePort = 8005
            sckControlPanel.Connect
            MsgBox (" " & TreeView1.Nodes(strKEy).Text)
        End If
    End If
Else
 
sckControlPanel.Close
Call sckControlPanel_Close
 
End If
 
Data1.Refresh
End Sub

Hai you guys, the above are the code to generate connected computer on the same network and displaying it in treeview. The problem here is the left click can't seem to function. I have tried putting a MsgBox at the button 1 to see what is it displaying when i click on the node and no matter what i click it will only display the root node name. This mean that i can't select the other computer name so it can't connect to the other computer.

RemoteHost = TreeView1.Nodes(strKEy).Text

Is there something wrong with this line. Can someone tell me what is wrong? Thanks in advanced

try to remove the Button = 1

just a wild gues

whats EnumServer?

No that doesn't work i just tried it. Thanks anyway

The value of the variable strKey is set in the Form_Load event but is never changed, so the code

TreeView1.Nodes(strKEy).Text

will always point to the same Node.

Plus, based on the code, you only have one Root node which means all other nodes have a Parent. The If Node.Parent Is Nothing will only be True for this Root node

Please tell me what do i have to change? I have been stuck with this for 1 week and no one know what is wrong with it? Please help me...
Thanks

Can anyone help me with this???

strKEy = TreeView1.SelectedItem.Key
try
strKEy = TreeView1.SelectedItem.index

VB Code:

Private Sub TreeView1_MouseDown(Button As Integer, Shift As Integer, x As Single, y As Single)
If strKEy <> "" Then
    'If TreeView1.Nodes(strKEy).Parent Is Nothing Then
 
        If Button = 2 Then ' if the mousebutton 2 is pressed (right)
            PopupMenu Rclick ' then it calls the menu which is hidden to be shown at the cordinates of the mousepointer (x,y)
 
        Else
 
            Button = 1
            RemoteHost = TreeView1.SelectedItem 'TreeView1.Nodes(strKEy).Text
            sckControlPanel.RemoteHost = RemoteHost
            sckControlPanel.RemotePort = 8005
            sckControlPanel.Connect
          'MsgBox (" " & TreeView1.SelectedItem)
        End If
    'End If
Else
 
sckControlPanel.Close
Call sckControlPanel_Close
 
End If
 
Data1.Refresh
End Sub

I have tried with this MsgBox (" " & TreeView1.SelectedItem) and it can display the correct node name. But the the mouse click always go to the root node and not the node which i want to click, i have to use the down button then only i can click on the other node. Why is this so? I tried with

Button = 1
RemoteHost = TreeView1.SelectedItem
sckControlPanel.RemoteHost = RemoteHost
sckControlPanel.RemotePort = 8005
sckControlPanel.Connect

But due to the problem above it can't work. I have tried to just set the remote host to the client IP and it can connect fine. Can someone help me with this...??

Thanks in advance

The strKey portion is still unclear to me so I ignored it. The following might give you some new ideas. Handle the Right Mouse click in MouseDown but use the NodeClick event when setting the sckControlPanel properties. NodeClick is like a "GotFocus" event for each Node.

VB Code:

Private Sub TreeView1_MouseDown(Button As Integer, Shift As Integer, x As Single, y As Single)
    Dim oNode As Node
    If Button = vbRightButton Then
        'make sure the user clicked on a node
        Set oNode = TreeView1.HitTest(x, y)
        If Not oNode Is Nothing Then
            PopupMenu mnuPopup, , x, y
        End If
    End If
End Sub
 
Private Sub TreeView1_NodeClick(ByVal Node As MSComctlLib.Node)
    RemoteHost = Node.Text
    sckControlPanel.RemoteHost = RemoteHost
    sckControlPanel.RemotePort = 8005
    sckControlPanel.Connect
End Sub

Thank alot brucevde :thumb:

You are the best. I have asked in many forums but no one knew what is the problem or how to solve it. But with the coding you gave solve my problem. Thanks alot. After stuck in this part for so long now i can move on to the next part which is the colour of the nodes.

Thanks you so very much you are the best.

Thanks to all you guys who try to help me too. Thanks alot....

To brucevde

Private Sub TreeView1_MouseDown(Button As Integer, Shift As Integer, x As Single, y As Single)
Dim oNode As Node
If Button = 2 Then 'vbRightButton
'make sure the user clicked on a node
'Set oNode = TreeView1.HitTest(x, y)
'If Not oNode Is Nothing Then
PopupMenu Rclick ', , x, y
'End If
End If
End Sub

I have close these lines

'Set oNode = TreeView1.HitTest(x, y)
'If Not oNode Is Nothing Then
PopupMenu Rclick ', , x, y
'End If
Except for the PopupMenu Rclick because when i use it the pop up menu pop up at the top of the form and not at the tip of the mouse cursor. What is the above line for? Can you tell it to me. Thanks alot

Quote:

---

Set oNode = TreeView1.HitTest(x, y)
If Not oNode Is Nothing Then

---

The first line checks to see if a Node is located at the Mouse coordinates (x,y). IE Did the user Right Click on a Node? If Yes, the oNode variable will reference a Node in the TreeView. If No, the oNode variable will be Nothing.

Basically, the popup menu is only shown if the user Right Clicks on the text of a Node. If that is not a requirement for you then obviously comment out (or delete)those lines as you already have done.

that was smart coding bruce!! .by the way one thing how can one change the color of a particular node in a similar way .

Thanks for your explaination Bruce. I also use the right click function but i have make a bit change to it

VB Code:

Private Sub TreeView1_MouseDown(Button As Integer, Shift As Integer, X As Single, Y As Single)
    Dim oNode As Node
    If Button = vbRightButton Then
        'make sure the user clicked on a node
        Set oNode = TreeView1.HitTest(X, Y)
        If Not oNode Is Nothing Then
            PopupMenu Rclick
            
   Else
      sckControlPanel.Close
    Call sckControlPanel_Close
    
        End If
        
    End If
End Sub

You see the originally coding
PopupMenu Rclick, , x, y

With the ", , x, y" behind PopupMenu Rclick will make the popup run to the top of the form. So i have taken it out and the popup will popup at the tip of the mouse cursor. Now my next step is to make the nodes to dispaly in different colour. Thanks alot

Quote:

---

Now my next step is to make the nodes to dispaly in different colour.

---

That is easy, each Node has ForeColor and BackColor properties. Unfortunately, the Treeview itself does not have a Backcolor property, so setting the BackColor property of each Node is just ugly. But ForeColor is alright, here is a quick example.

VB Code:

Private Sub Form_Load()
    Dim lngIdx As Long
    Dim oNode As Node
    
    With Me.TreeView1
        .LineStyle = tvwRootLines
        For lngIdx = 1 To 3
            Set oNode = .Nodes.Add(, , , "Root " & lngIdx)
            oNode.ForeColor = vbRed
            oNode.Expanded = True
        Next
    
        For lngIdx = 1 To 3
            'VB Color constants
            Set oNode = .Nodes.Add(lngIdx, tvwChild, , "Parent " & lngIdx)
            oNode.ForeColor = vbBlue
            
            'or use the RGB function
            Set oNode = .Nodes.Add(lngIdx, tvwChild, , "Parent " & lngIdx)
            oNode.ForeColor = RGB(0, 0, 172)
        Next
    
    End With
End Sub

:thumb: Thanks alot for your coding Bruce. I just use like this to display the Parent and the children nodes colour

'To display computer in TreeView
Set rt = TreeView1.Nodes.Add(, , "Root Node", "Lab Control")
rt.ForeColor = vbBlue ' Set the colour of Root to blue

For intIDX = 1 To UBound(ServerList.List)
strServer = ServerList.List(intIDX).ServerName
t = strServer & intIDX
Set ch = TreeView1.Nodes.Add(rt, tvwChild, t, strServer)
ch.ForeColor = vbGreen
rt.Expanded = True


Next

End If

I have set all to green 1st then when i lock the computers it should be green then when the computer is in use the node forecolor will be set to vbRed. If i is shutdown then then forecolor will be set to vbBlack.

Take care and have a nice day.... Thanks again