Come on experts answer this.

Ok, so now I've got your attention.
I need a routine that will allow me to run another application and detect when it has finished loading.

I don't meen using the shell command I meen 32Bit Windows applications.

I don't even know if this is possible, anyone got any ideas?

The Shell function in VB will start another (Win32) application, and return a long with the program's ID if it was successful or a 0 if it wasn't.

However, the problem with this is that Shell is asynchronous. Meaning the code after the Shell function might execute before the program that Shell started finishes starting up so checking if Shell returned a zero straight after the Shell function is not always a good idea.


Sunny

Ok so maybe I can use the shell command.
Are you saying that I could keep checking the value returned from the shell command until the application is loaded?

I assumed that you could only get a single value that will be returned as soon as the shell command is run?

I need to keep checking to see if an application has finished loading and then get the vb program to react.
If this can be done with shell can you give a code example?

You could find the applications handle and do loop until it doesn't exist any more.

regards

Chris

If I check for the window handle that will tell me when the application appears in memory but not when it has finished loading.

It would be ok to check if an application has been closed but not when it has finished loading.

If I am wrong then give me an example of how you might do it?

You could loop until the value is not equal to zero, but this essentially means that you program must start, otherwise VB goes into an endless loop (unless you have some cancel function), or an API that can check for exisiting windows (which I admit I'm not good with).

Code:

---

Option Explicit
Dim StopNow As Boolean

Private Sub Form_Load()
Dim i As Long

StopNow = False

i = Shell("c:\windows\calc.exe")

Do Until i <> 0
    DoEvents
    If StopNow = True Then
        StopNow = False
        Exit Do
    End If
Loop

MsgBox "loaded"

End Sub

Private Sub Command1_Click()  'cancel
    StopNow = True
End Sub

---

Feel free to flame me for using DoEvents.

Sunny

Code:

---

'uses Timer1, Form1,Command1

'~~~~~~~MODULE CODE~~~~~~~~~~~~

Option Explicit

Public Const WM_CLOSE = &H10
Public Const MAX_PATH = 260

Declare Function FindWindow Lib "user32" Alias "FindWindowA" _
    (ByVal lpClassName As String, ByVal lpWindowName As String) As Long
Declare Function PostMessage Lib "user32" Alias "PostMessageA" _
    (ByVal hwnd As Long, ByVal wMsg As Long, ByVal wParam As Long, _
    ByVal lParam As Long) As Long
Declare Function EnumWindows Lib "user32" _
    (ByVal lpEnumFunc As Long, ByVal lParam As Long) As Long
Declare Function GetWindowText Lib "user32" Alias "GetWindowTextA" _
    (ByVal hwnd As Long, ByVal lpString As String, ByVal cch As Long) As Long

Private sAppTitle As String
Public glHwnd As Long

Public Function fEnumWindowsCallBack(ByVal hwnd As Long, ByVal lpData As Long) As Long
    Dim lResult    As Long
    Dim sWndName  As String
   
    fEnumWindowsCallBack = 1
    sWndName = Space$(MAX_PATH)
   
    lResult = GetWindowText(hwnd, sWndName, MAX_PATH)
    sWndName = Left$(sWndName, lResult)
    'Search Title for our string
    If (InStr(1, sWndName, sAppTitle, vbTextCompare) > 0) Then
        Debug.Print sWndName
        glHwnd = hwnd
        fEnumWindowsCallBack = 0
    End If
End Function

Public Function SearchWindows(sApp As String, hwnd As Long) As Long
    sAppTitle = sApp
    glHwnd = 0
    Call EnumWindows(AddressOf fEnumWindowsCallBack, hwnd)
    SearchWindows = glHwnd
End Function


'~~~~~~~FORM CODE~~~~~~~~~~~~~~

Option Explicit

Private Sub Command1_Click()
  Dim RetVal
RetVal = Shell("C:\WINDOWS\notepad.exe C:\WINDOWS\mytext.txt")
 
End Sub

Private Sub Form_Load()
    Timer1.Interval = 1
End Sub

Private Sub Timer1_Timer()
Dim sApp As String
    'Find notepad with partial name
    sApp = "notepa"
    glHwnd = SearchWindows(sApp, Me.hwnd)
    'End application if found
    If glHwnd > 0 Then
        'do whatever you want to do
        MsgBox "yes it is loaded"
        Timer1.Enabled = False
    Else
      'do nothing
    End If
End Sub

---

Thanks both your posts seem to offer good solutions
I will need to test them a little more before I can be sure however.

HesaidJoe, can you be sure that when an application appears in the Hwnd list that it is fully loaded?
Could it be still processing?

Thanks for the good ideas anyway.

Too much code, HeSaidJoe! :rolleyes:
sunnyl: Flame! ;) The variable i cannot change without i = ....
DoEvents is ok, though. I used it in the following working short example:

Code:

---

Option Explicit

Private Declare Function WaitForSingleObject Lib "kernel32" (ByVal hHandle As Long, ByVal dwMilliseconds As Long) As Long
Private Declare Function OpenProcess Lib "kernel32" (ByVal dwDesiredAccess As Long, ByVal bInheritHandle As Long, ByVal dwProcessID As Long) As Long
Private Declare Function CloseHandle Lib "kernel32" (ByVal hObject As Long) As Long

Private Const SYNCHRONIZE = &H100000

Private Const WAIT_FAILED = &HFFFFFFFF
Private Const WAIT_TIMEOUT = &H102&

Function SyncShell(PathName, Optional WindowStyle As VbAppWinStyle = vbMinimizedFocus) As Long
    Dim dwProcessID As Long, hProcess As Long, lState As Long
   
    On Error GoTo ErrorHandler
    SyncShell = -1
   
    dwProcessID = Shell(PathName, WindowStyle)
    If dwProcessID = 0 Then Exit Function
    hProcess = OpenProcess(SYNCHRONIZE, False, dwProcessID)
    If hProcess = 0 Then Exit Function
   
    Do
        DoEvents
        lState = WaitForSingleObject(hProcess, 0)
       
        If lState = WAIT_FAILED Then
            Call CloseHandle(hProcess)
            Exit Function
        End If
    Loop While lState = WAIT_TIMEOUT
   
    Call CloseHandle(hProcess)
    SyncShell = 0
    Exit Function
   
ErrorHandler:
    SyncShell = Err.Number
    Call CloseHandle(hProcess)
End Function

---

Use SyncShell exactly like Shell.
It returns zero on success.
On failure:
If it's an API error, it returns -1 and the error number is stored in Err.LastDllError.
If it's a VB runtime error, it returns the error number.

[Edited by Yonatan on 09-22-2000 at 11:09 AM]

Try this:

Code:

---

Private Declare Function OpenProcess Lib "Kernel32" (ByVal dwDesiredAccess As Long, ByVal bInheritHandle As Long, ByVal dwProcessId As Long) As Long
Private Declare Function GetExitCodeProcess Lib "Kernel32" (ByVal hProcess As Long, lpExitCode As Long) As Long
Private Declare Sub Sleep Lib "Kernel32" (ByVal dwMilliseconds As Long)
Const STILL_ACTIVE = &H103
Const PROCESS_QUERY_INFORMATION = &H400

'JobtoDo - Program to run
'frm - Form
'You can do anything after the loop..shell another program if that program is close, load another version of your app, etc.

Sub Shell32Bit(ByVal JobToDo As String, frm As Form)

        Dim hProcess As Long
        Dim RetVal As Long
        'The next line launches JobToDo as icon,

        'captures process ID
        hProcess = OpenProcess(PROCESS_QUERY_INFORMATION, False, Shell(JobToDo, 1))

        Do

            'Get the status of the process
            GetExitCodeProcess hProcess, RetVal

            'Sleep command recommended as well as DoEvents
            DoEvents: Sleep 100

        'Loop while the process is active
        Loop While RetVal = STILL_ACTIVE
        Msgbox "Application is finished!", 48
End Sub

Usage:

Private Sub Command1_Click()
Call Shell32Bit("C:\App\App.exe", Me)
End Sub

---