Requires Thinking -Yonatan?

i have been working on moving a ball (image) to certain points on the form and move it back to where it was when a mouse over is not over certain images

FINALLY got it working ALMOST properly
however sometimes the ball does not go to the exact point i want it to go

you have to do a lot of mouseovers until you see this happens
because 90% of the time it does exactly go to the given point
but other times it goes a little off
any one could have a look i would GREATLY appreciated thank you

i have done EVERYTHING humanly possible to get this working and i cant, i think someone else might pick out the problem since they have not been thinking about it too much..


2 files you need
http://24.112.141.149/test/frmMainMenu.frm
http://24.112.141.149/test/frmMainMenu.frx

I fixed it! WOO! WOO! :rolleyes:
Could be improved more, but I didn't work on that.
Also in the imgXXX_MouseMove some numbers were a bit off (A difference of 5 or 10 or 20 twips, nothing to worry about) - now they're all correct values.
By the way, kill tmrBack. :)
Looks sloppy but works:

Code:

---

Option Explicit

Dim Xp1, Xp2, Yp1, Yp2, destXPoint, destYpoint As Integer
Dim XPoint As Integer
Dim YPoint As Integer
Dim Slope As Double
Dim YIntercept As Double
Dim UpDown As Boolean

Private Sub CoordinateCalc()
    UpDown = (Xp1 = Xp2)
    If Not UpDown Then
        Slope = (Yp1 - Yp2) / (Xp1 - Xp2) ' Slope cannot be negative? Yes it can!
        YIntercept = Slope * Xp1 - Yp1
    End If
End Sub

Private Sub MoveBall(x1 As Integer, x2 As Integer, y1 As Integer, y2 As Integer, dest As Integer)
    If (x1 = x2) And (y1 = y2) Then Exit Sub
    Xp1 = x1
    Xp2 = x2
    Yp1 = y1
    Yp2 = y2
    destXPoint = dest
    destYpoint = Yp2
    Call CoordinateCalc
    TmrDrop.Enabled = True
End Sub

Private Sub Form_Initialize()
    XPoint = 3
    YPoint = 3
End Sub

Private Sub Form_MouseMove(Button As Integer, Shift As Integer, X As Single, Y As Single)
Call MoveBall(3, XPoint, 3, YPoint, 3)
End Sub

Private Sub imgAdministrator_MouseMove(Button As Integer, Shift As Integer, X As Single, Y As Single)
Call MoveBall(XPoint, 2970, YPoint, 5505, 2970)
End Sub

Private Sub imgCapar_MouseMove(Button As Integer, Shift As Integer, X As Single, Y As Single)
Call MoveBall(XPoint, 7375, YPoint, 1750, 7375)
End Sub

Private Sub imgCutSeals_MouseMove(Button As Integer, Shift As Integer, X As Single, Y As Single)
Call MoveBall(XPoint, 6360, YPoint, 1230, 6360)
End Sub

Private Sub imgDispute_MouseMove(Button As Integer, Shift As Integer, X As Single, Y As Single)
Call MoveBall(XPoint, 5350, YPoint, 730, 5350)
End Sub

Private Sub imgFutureDueMeters_MouseMove(Button As Integer, Shift As Integer, X As Single, Y As Single)
Call MoveBall(XPoint, 1950, YPoint, 1770, 1950)
End Sub

Private Sub imgInLog_MouseMove(Button As Integer, Shift As Integer, X As Single, Y As Single)
Call MoveBall(XPoint, 7375, YPoint, 3870, 7375)
End Sub

Private Sub imgInspectionCertificate_MouseMove(Button As Integer, Shift As Integer, X As Single, Y As Single)
Call MoveBall(XPoint, 3960, YPoint, 5005, 3960)
End Sub

Private Sub imgMeterInformation_MouseMove(Button As Integer, Shift As Integer, X As Single, Y As Single)
Call MoveBall(XPoint, 6360, YPoint, 5480, 6360)
End Sub

Private Sub imgMSOComplaints_MouseMove(Button As Integer, Shift As Integer, X As Single, Y As Single)
Call MoveBall(XPoint, 1950, YPoint, 3870, 1950)
End Sub

Private Sub imgMSOMeterInformation_MouseMove(Button As Integer, Shift As Integer, X As Single, Y As Single)
Call MoveBall(XPoint, 3960, YPoint, 2850, 3960)
End Sub

Private Sub imgMSONewMeters_MouseMove(Button As Integer, Shift As Integer, X As Single, Y As Single)
Call MoveBall(XPoint, 2970, YPoint, 3360, 2970)
End Sub

Private Sub ImgNonConformance_MouseMove(Button As Integer, Shift As Integer, X As Single, Y As Single)
Call MoveBall(XPoint, 5350, YPoint, 4980, 5350)
End Sub

Private Sub imgOpenDB_MouseMove(Button As Integer, Shift As Integer, X As Single, Y As Single)
Call MoveBall(XPoint, 1950, YPoint, 6030, 1950)
End Sub

Private Sub imgOutLog_MouseMove(Button As Integer, Shift As Integer, X As Single, Y As Single)
Call MoveBall(XPoint, 6360, YPoint, 3360, 6360)
End Sub

Private Sub imgOutStandingMeters_MouseMove(Button As Integer, Shift As Integer, X As Single, Y As Single)
Call MoveBall(XPoint, 5350, YPoint, 2850, 5350)
End Sub

Private Sub imgOverDueMeters_MouseMove(Button As Integer, Shift As Integer, X As Single, Y As Single)
Call MoveBall(XPoint, 2970, YPoint, 1240, 2970)
End Sub

Private Sub imgPresentDueMeters_MouseMove(Button As Integer, Shift As Integer, X As Single, Y As Single)
Call MoveBall(XPoint, 3960, YPoint, 730, 3960)
End Sub


Private Sub imgScrap_MouseMove(Button As Integer, Shift As Integer, X As Single, Y As Single)
Call MoveBall(XPoint, 7375, YPoint, 6000, 7375)
End Sub

Private Sub TmrDrop_Timer()
imgBall.Left = imgBall.Left + 50 * Sgn(Xp2 - Xp1) ' -50 or +0 or +50 depending on situation
If UpDown Then
    imgBall.Top = imgBall.Top + 50 * Sgn(Yp2 - Yp1)
Else
    imgBall.Top = imgBall.Left * Slope - YIntercept
End If

If Not UpDown Then
Select Case Sgn(Xp2 - Xp1)
Case -1 ' Moves backwards
    If imgBall.Left <= Xp2 Then
        imgBall.Left = Xp2
        imgBall.Top = Yp2
        TmrDrop.Enabled = False
    End If
Case 1 ' Moves forwards
    If imgBall.Left >= Xp2 Then
        imgBall.Left = Xp2
        imgBall.Top = Yp2
        TmrDrop.Enabled = False
    End If
End Select
Else ' UpDown
Select Case Sgn(Yp2 - Yp1)
Case -1 ' Moves up
    If imgBall.Top <= Yp2 Then
        imgBall.Left = Xp2
        imgBall.Top = Yp2
        TmrDrop.Enabled = False
    End If
Case 1 ' Moves down
    If imgBall.Top >= Yp2 Then
        imgBall.Left = Xp2
        imgBall.Top = Yp2
        TmrDrop.Enabled = False
    End If
End Select
End If
End Sub

Private Sub tmrPosition_Timer()
XPoint = imgBall.Left
YPoint = imgBall.Top
End Sub

---

Enjoy! Have a ball! ;)

impressive but too slopy (notice its slopy, not sloppy? :) )

and if ya go on one item, and go off it the ball follows the mouse.. hehe crazy
and if you move your mouse around on the form looks like crap :)

thanks for trying to help..
but i dont know why sometimes it goes to exact point i want it to and sometimes it goes off
EVEN i TELL it with code to go when its done moving
like if i tell it to go to 5, 5
and i am increming by 7

i check like if .left > destinationX (5) in this case it would be 7 cus its incrementing by 7
after it goes to 7 i say well if its greater then destinationX then bring it back to destinationX

grrr this is really making me mad
might just drop it
stupid thing

appreciate your help
oh and something else.. hehe i think i am a little crazy trying to do this with vb, should do this in openGL or something....

[Edited by kovan on 09-14-2000 at 12:32 PM]

Remove the Form_MouseMove event. :rolleyes:
I don't have the ball going to the non-exact point...
Works OK!