sql results in excel

The following code shows that if I run the micro command in the first sheet (sheet1) of my workbook then the results of the query they will be presented in sheet1.
What changes should I make in the code in order to are presented the results in an other sheet e.g. Sheet2.



Sub Refresh()
'Declare variables
Dim OraSession As Object
Dim OraDatabase As Object
Dim EmpDynaset As Object
Dim flds() As Object
Dim fldcount As Integer
Dim userentry As String
Dim dtentryFROM As Date
Dim dtentryTO As Date
Dim strdtfrom As String
Dim strdtto As String


'dtentryTO = Format(dd / mm / yyyy)
strdtfrom = InputBox("From Date:")
strdtto = InputBox("To Date:")
userentry = InputBox("Please give User")

Set OraSession = CreateObject("OracleInProcServer.XOraSession")

Set OraDatabase = OraSession.OpenDatabase("mydb", "username/pass", 0&)

Set EmpDynaset = OraDatabase.CreateDynaset("SELECT ROWNUM, tbl1, tbl2 FROM data WHERE date>= TO_DATE ('" + strdtfrom + "', 'DD/MM/RRRR') AND date< TO_DATE ('" + strdtto + "', 'DD/MM/RRRR') AND user = " + userentry + " ORDER BY date, ROWNUM", 0&)

'Set objSht = objWkb.Worksheets(class)

'Worksheets(class).
Range("A2:C2000").Select



'Range("A2:C2000").Select

Selection.ClearContents


'Declare and create an object for each column.

'This will reduce objects references and speed

'up your application.

fldcount = EmpDynaset.Fields.Count

ReDim flds(0 To fldcount - 1)

For colnum = 0 To fldcount - 1

Set flds(colnum) = EmpDynaset.Fields(colnum)

Next



'Insert Column Headings

'For Colnum = 0 To EmpDynaset.Fields.Count - 1

'ActiveSheet.Cells(1, Colnum + 1) = flds(Colnum).Name

'Next


'Display Data

For Rownum = 2 To EmpDynaset.RecordCount + 1

For colnum = 0 To fldcount - 1

ActiveSheet.Cells(Rownum, colnum + 1) = flds(colnum).Value

Next

EmpDynaset.MoveNext

Next


Range("A2:A2").Select

End Sub

any help????

You can reference any worksheet in any workbook as an object.

e.g. Reference a named sheet that already exists...

Code:

---

  Dim ws as Worksheet
  Set ws = ActiveWorkbook.Sheets("Sheet2")

---

e.g. A new sheet in the current workbook...

Code:

---

  Dim ws as Worksheet
  Set ws = ActiveWorkbook.Sheets.Add
  ws.Name = "New Sheet"

---

e.g. A new sheet in a new workbook...

Code:

---

  Dim ws as Worksheet
  Set ws = Application.Workbooks.Add.Sheets.Add

---

i put this

Dim XL As Excel.Application
Dim Wkb As Excel.Workbook
Dim ws As Worksheet
Set ws = ActiveWorkbook.Sheets("sheet2")

and i get data again on sheet1??

Did you replace your ActiveSheet references with ws??

How about this?

VB Code:

Private Function GenerateReport(oData As ADODB.Recordset, Name As String) As String
 
    On Error GoTo ERR_GenerateReport
    
    Dim xlApp As Object
    Dim xlWb As Object
    Dim xlWs As Object
    Dim sFile As String
    Dim sDirectory As String
    Dim lCtr As Long
    
    '**************************************************************
    '* Make the report directory if it doesn't already exist . . .
    '**************************************************************
    sDirectory = mReportRootDirectory & "\" & Replace(Name, Chr(32), "")
    If Dir(sDirectory, vbDirectory) = vbNullString Then
        MkDir sDirectory
        SetAccess "Everyone", sDirectory, 0&
        SetAccess "SQLExec", sDirectory, GENERIC_READ Or GENERIC_EXECUTE Or DELETE Or GENERIC_WRITE
        SetAccess Environ$("USERNAME"), sDirectory, GENERIC_READ Or GENERIC_EXECUTE Or DELETE Or GENERIC_WRITE Or GENERIC_ALL
        App.LogEvent "Created Directory '" & sDirectory & "'", vbLogEventTypeInformation
    End If
    
    '*****************************************************************************************
    '* Get the XL objects. These are late bound because Microsoft change versions often . . .
    '*****************************************************************************************
    Set xlApp = CreateObject("Excel.Application")
    Set xlWb = xlApp.Workbooks.Add
    Set xlWs = xlWb.Worksheets("Sheet1")
 
    '********************************
    '* Add the column headings . . .
    '********************************
    For lCtr = 0 To oData.Fields.Count - 1
        xlWs.Cells(1, lCtr + 1) = oData.Fields(lCtr).Name
    Next
    
    '*****************************
    '* Copy data and format . . .
    '*****************************
    xlWs.Cells(2, 1).CopyFromRecordset oData
    xlApp.Selection.CurrentRegion.Columns.Autofit
    
    '********************************
    '* Save the file, and quit . . .
    '********************************
    sDirectory = Right$(sDirectory, Len(sDirectory) - 3) 'strip of leading drive letter e.g 'c:\'
    sDirectory = "\\" & Environ$("COMPUTERNAME") & "\" & sDirectory
    sFile = sDirectory & "\" & Format$(Now, "yyyymmddhhnnss") & Replace(Name, Chr(32), "")
    
    xlWb.SaveAs sFile
    xlApp.quit
    
    Set xlWs = Nothing
    Set xlWb = Nothing
    Set xlApp = Nothing
    
    GenerateReport = sFile
    
    Exit Function
    
ERR_GenerateReport:
 
    Set xlWs = Nothing
    Set xlWb = Nothing
    Set xlApp = Nothing
    
    GenerateReport = vbNullString
    
End Function

try this

Range("sheet2!A1:C1000").select

i replace the ws...
my code now is :

Private Sub OKclass_Click()
Dim OraSession As Object
Dim OraDatabase As Object
Dim EmpDynaset As Object
Dim flds() As Object
Dim fldcount As Integer
Dim userentry As String
Dim dtentryFROM As Date
Dim dtentryTO As Date
Dim strdtfrom As String
Dim strdtto As String
'Dim XL As Excel.Application
'Dim Wkb As Excel.Workbook
Dim ws As Worksheet
Set ws = ActiveWorkbook.Sheets("class")
'dtentryTO = Format(dd / mm / yyyy)
strdtfrom = InputBox("From Date:")
strdtto = InputBox("To Date:")
userentry = InputBox("Please give User_Id")

Set OraSession = CreateObject("OracleInProcServer.XOraSession")

Set OraDatabase = OraSession.OpenDatabase("mydb", "username/pass", 0&)

Set EmpDynaset = OraDatabase.CreateDynaset("SELECT ROWNUM,tbl1,tbl2 Data WHERE date >= TO_DATE ('" + strdtfrom + "', 'DD/MM/RRRR') AND date < TO_DATE ('" + strdtto + "', 'DD/MM/RRRR') AND user = " + userentry + " ORDER BY date, ROWNUM", 0&)

'Range("sheet2!A1:C1000").Select

Range("A2:C2000").Select

Selection.ClearContents


'Declare and create an object for each column.

'This will reduce objects references and speed

'up your application.

fldcount = EmpDynaset.Fields.Count

ReDim flds(0 To fldcount - 1)

For colnum = 0 To fldcount - 1

Set flds(colnum) = EmpDynaset.Fields(colnum)

Next



'Insert Column Headings

'For Colnum = 0 To EmpDynaset.Fields.Count - 1

'ActiveSheet.Cells(1, Colnum + 1) = flds(Colnum).Name

'Next
'Display Data

For Rownum = 2 To EmpDynaset.RecordCount + 1

For colnum = 0 To fldcount - 1

ActiveSheet.Cells(Rownum, colnum + 1) = flds(colnum).Value

Next

EmpDynaset.MoveNext

Next
Range("A2:A2").Select
End Sub


and the "Range("sheet2!A1:C1000").Select"
don' work stops with en error msg!!

alazarou,

look at yrwyddfa's post above because it clearly shows how to do it. These are the important steps...

This code below gets the Excel objects and creates a reference to Sheet1 called xlWs. If your code is running inside Excel you don't need the first two lines. If you want your records on sheet2 then replace "Sheet1" with "Sheet2".

Code:

---

     
'*****************************************************************************************
    '* Get the XL objects. These are late bound because Microsoft change versions often . . .
    '*****************************************************************************************
    Set xlApp = CreateObject("Excel.Application")
    Set xlWb = xlApp.Workbooks.Add
    Set xlWs = xlWb.Worksheets("Sheet1")

---

The next section adds the column headings to the first row of the worksheet- I notice that you have some very similar code in your post. There is no need to copy the headings into an array before putting them on the worksheet. Notice how xlWs is at the start of the statement. Change 'oData' to the name of your dynaset object.

Code:

---

    '********************************
    '* Add the column headings . . .
    '********************************
    For lCtr = 0 To oData.Fields.Count - 1
        xlWs.Cells(1, lCtr + 1) = oData.Fields(lCtr).Name
    Next

---

The next section gets the data using the mucho efficient CopyFromRecordset method - using "xlWs" again. Then the Autofit method is called to set all the column widths to match the data. Change xlApp to Application if you are working in Excel VBA. You will also need to change oData again.

Code:

---

    '*****************************
    '* Copy data and format . . .
    '*****************************
    xlWs.Cells(2, 1).CopyFromRecordset oData
    xlApp.Selection.CurrentRegion.Columns.Autofit

---

It should be as simple as that. Does this help any??

ok this was very helpful !!

thank you all guys!!!