stopping moving pictures [Resolved]

2 Questions:
1)
I have a picture that moves across the form. How do I stop it when it gets to a specific point on the form.
<code>
Private Sub Timer1_Timer()
Static lLeftPos As Long
lLeftPos = Picture1.Left + 10
If (lLeftPos + Picture1.Width) > Me.ScaleWidth Then lLeftPos = 0
Picture1.Left = lLeftPos
End Sub

</code>

2) I've sussed out how to make it go in the opposite direction by changing + to - , but how would I get it to move up or down the form?


Any ideas appreciated

heres the prog so u can see what I'm trying to do: (get pictures 1 & 7 to stop moving when they reach the stick man)

In timer1 sub add this

If Picture1.Left >= Picture3.Left - 1000 Then Timer1.Enabled = False

so picture1 will stop 1000 twips or units before picture3 (stickman).

do the same for the other two pictures.

VB Code:

Static lLeftPos As Long
    lLeftPos = Picture1.Left + 80
    If (lLeftPos + Picture1.Width) > Me.ScaleWidth Then lLeftPos = 0
    Picture1.Left = lLeftPos
    If (lLeftPos + Picture1.Width) = 3480 Then
    Timer1.Enabled = False

ok, here's what you SHOULD do

VB Code:

'Watch carefully as I change these 3 lines into 1
'Static lLeftPos As Long
'    lLeftPos = Picture1.Left + 80
'    Picture1.Left = lLeftPos
Picture1.left = Picture1.left + 80 'yes you can do this
 
 
'Change this from
'    If (lLeftPos + Picture1.Width) > Me.ScaleWidth Then lLeftPos = 0
'to
if picture1.left + picture1.width > me.scalewidth then picture1.left = 0
 
'I don't know what your trying to do here
    If (lLeftPos + Picture1.Width) = 3480 Then  Timer1 = False

For moving up and down, just change picture1.top (- = up, + = down)

Or, if you want 360 degree motion, you can use this code

VB Code:

'Subroutine for moving things
Private sub Movement (byref X, byref Y, Angle, Speed)
X = X + Speed * Sin(Rad(Angle))
Y = Y + Speed * cos(Rad(Angle))
End sub
 
'This subroutine converts degrees to radians
Private sub Rad(X)
'3.14 is Pi, could be more precise
X = X * 3.14 / 180
end sub
 
'and the loop..
Sub timer1_timer
Call movement(X,Y,0,100)
end sub

as you change angle from 0 to 360 it would move the object in a circle, beginning with east and rotating counter-clockwise (0 = east, 90 = north, 180 = west...)

Thanks 2 both of you for your replies. I have used the stop version Dude provided because it worked instantly, and the up/down that alcatran posted.

I have now incountered another problem:

I wish Timer1 to loop, but ? because of the Timer.enabled = false/ it does not work. (Or is it because I still haven't sussed loops out properly?)

What exactly do you want to do after the pictures have stopped? Why do you need to loop?

what Dude1 stated won't work. try placing picture1 lower than picture3 and watch, it'll stop. You have to also check if its in the range of picture3 like this

Code:

---

If Picture1.Left + Picture1.Width >= Picture3.Left And Picture1.Top >= Picture3.Top And Picture1.Top + Picture1.Height <= Picture3.Top + Picture3.Height Then
    'Stop the timer that moves picture1
End If
'You can put this code in the timer that moves picture1, or you can create a timer that checks for collision
'This code only checks for collision between picture1 and picture3, im sure u can now use this code for collision between picture7 and picture3, just change around some numbers.

---

Also always give your objects names it makes it easier to read

Hope this helps :D

The program I am writing is an animation of a factory. A part is animated till it gets to a worker or machine that will assemble parts together(stop animation of single pictures and continue with a picture of the parts assembled.

I want the loop so each time the picture stops and restarts a counter will be incremented to show the number of parts assembled.

Here's how far I have got: lots of work to go still and some things documented in comments that aren't quite working how I expected them to

instead of disabling the timer when the picture reaches he stick man or anything else u can just not make it move like this

Code:

---

'use the same code for checking if the picture collided, just instead of putting

If Picture1.Left + Picture1.Width >= Picture3.Left And Picture1.Top >= Picture3.Top And Picture1.Top + Picture1.Height <= Picture3.Top + Picture3.Height Then
    Timer1.Enabled = False
End If

'Put this
If Picture1.Left + Picture1.Width >= Picture3.Left And Picture1.Top >= Picture3.Top And Picture1.Top + Picture1.Height <= Picture3.Top + Picture3.Height Then
    Picture1.Left = Picture3.Left - Picture1.Width
End If

'that prevents he timer from stopping

---

Hope this helps:D