help with VK keys

Hey, first of all, is VK key the best way to go? I use it in C++ a litte, seems to work. Anyways, heres what I have, isn't working.

Dim checkkeys As Boolean
Private Declare Function GetAsyncKeyState _
Lib "user32" (ByVal vKey As Long) As Integer
Private Sub Form_Load()
checkstuff
End Sub
Private Sub checkstuff()
checkkeys = True
Do While checkkeys = True
If GetAsyncKeyState(VK_DOWN) Then
MsgBox "YESSUM!"
Else
MsgBox "NOPE"
End If
Loop
End Sub

Huh try putting a DoEvents inside the loop... this way it won't stop the program to run the loop. You must also use Me.Show before the loop or it won't display the form properly :)

still freezes. well, any help is appreciated.

Man that's not a freeze, it's executing the loop just like you told it to :)

The problem is that every milisecond or so it checks if the key is pressed, and the messagebox will stop the loop until you press OK and then the loop will start again just a few miliseconds later... and I don't think you can press the down key that fast :)

Try this instead. I only did the modifications I told you about, and replaced the messagebox thingy with a line that will simply set the form's caption to the return value.

VB Code:

Dim checkkeys As Boolean
Private Declare Function GetAsyncKeyState _
Lib "user32" (ByVal vKey As Long) As Integer
 
Private Sub Form_Load()
    Me.Show
    checkstuff
End Sub
 
Private Sub checkstuff()
    checkkeys = True
    Do While checkkeys = True
        If GetAsyncKeyState(VK_DOWN) Then
            Me.Caption = "YESSUM!"
        Else
            Me.Caption "NOPE"
        End If
        DoEvents
    Loop
End Sub

(Btw, you can use [ vbcode ] and [/ vbcode ] tags to make your code look better when you post it :D ;) )

is there any way to tell it to wait 100 ms before checking again? I tried to use a timer but I couldnt figure out how to use it the way I need.

Yes, you can limit the loop by using then GetTickCount() API or the QueryPerformanceCounter() API. For example:[Highlight=VB]Private Declare Function GetTickCount Lib "kernel32" Alias "GetTickCount" () As Long

Dim checkkeys As Boolean
Private Declare Function GetAsyncKeyState _
Lib "user32" (ByVal vKey As Long) As Integer

Private Sub Form_Load()
Me.Show
checkstuff
End Sub

Private Sub checkstuff()
Dim T As Long
T = GetTickCount
checkkeys = True
Do While checkkeys = True
If GetTickCount - T => 100 Then 'If 100ms has passed...
If GetAsyncKeyState(VK_DOWN) Then
Me.Caption = "YESSUM!"
Else
Me.Caption "NOPE"
End If
T = GetTickCount
End If
DoEvents
Loop
End Sub

um its still not working.. this tick count thing works! but.. its not catching the key down..
could it be because I have a usb keyboard? I don't know.. well plz help!

That's making it only check every 100ms, so it'd be harder to catch keypreses that way.

Heh don't worry, I'll give you the code when I get home ;)
(Just make sure yhou post here again so this thing e-mails me and I don't forget about it :p )

VB Code:

Dim checkkeys As Boolean
Private Declare Function GetAsyncKeyState Lib "user32" (ByVal vKey As Long) As Integer
Private Declare Function GetTickCount Lib "kernel32" Alias "GetTickCount" () As Long 
 
Private Sub Form_Load()
    Me.Show
    checkstuff
End Sub
 
Private Sub checkstuff()
    Dim tmpL&, bolOn as boolean
 
    checkkeys = True
    Do While checkkeys = True
        if not bolOn then bolOn =GetAsyncKeyState(VK_DOWN) 
 
        if (tmpl-gettickcount) >=100 then
            If bolOn Then
                Me.Caption = "YESSUM!"
                bolOn = false
             Else
                 Me.Caption "NOPE"
             End If
             tmpl=gettickcount
        End if
        DoEvents
    Loop
End Sub

This will still check every few milliseconds. If it is off, then it will set it to the key state. If it is on, it will leave it on. Then, every 100 milliseconds, it will check the state of the boolean. It will also do the doevents every few milliseconds.

The spelling may not be correct.
I am at school, and can't test the code right now.

I dunno, I think its just not detecting the key.. even the VB key stuff doesnt work. Well I have XP and a USB keyboard, can this effect the well being of the code? In anycase it isn't working so again any help as well as the help I have been getting is welcome and thanked. Thanks guys.

Oops, I had the gettickcount and tmpl revesed. Heres the fixed code:

VB Code:

Option Explicit
 
Dim checkkeys As Boolean
Private Declare Function GetAsyncKeyState Lib "user32" (ByVal vKey As Long) As Integer
Private Declare Function GetTickCount Lib "kernel32" () As Long
 
Private Sub Form_Load()
    Me.Show
    DoEvents
    checkstuff
End Sub
 
Private Sub checkstuff()
    Dim tmpL&, bolOn As Boolean
 
    checkkeys = True
    Do While checkkeys = True
        If Not bolOn Then bolOn = GetAsyncKeyState(vbKeyA)
        
        If (GetTickCount - tmpL) >= 100 Then
            If bolOn Then
                Me.Caption = "YESSUM!"
                bolOn = False
             Else
                 Me.Caption = "NOPE"
             End If
             tmpL = GetTickCount
        End If
        DoEvents
    Loop
    
    Unload Me
End Sub
 
Private Sub Form_Unload(Cancel As Integer)
 If checkkeys Then
  checkkeys = False
  Cancel = -1
 End If
End Sub

This code will also allow the close button to work too.

Also, I switched the vbKeyDown to vbKeyA, switch it back if you wish...

So like this:

VB Code:

Option Explicit
 
Dim checkkeys As Boolean
Private Declare Function GetAsyncKeyState Lib "user32" (ByVal vKey As Long) As Integer
Private Declare Function GetTickCount Lib "kernel32" () As Long
 
Private Sub Form_Load()
    Me.Show
    DoEvents
    checkstuff
End Sub
 
Private Sub checkstuff()
    Dim tmpL&, bolOn As Boolean
 
    checkkeys = True
    Do While checkkeys = True
        If Not bolOn Then bolOn = GetAsyncKeyState(vbKeyDown)
        
        If (GetTickCount - tmpL) >= 100 Then
            If bolOn Then
                Me.Caption = "YESSUM!"
                bolOn = False
             Else
                 Me.Caption = "NOPE"
             End If
             tmpL = GetTickCount
        End If
        DoEvents
    Loop
    
    Unload Me
End Sub
 
Private Sub Form_Unload(Cancel As Integer)
 If checkkeys Then
  checkkeys = False
  Cancel = -1
 End If
End Sub

Ur the man! Hey what does option explicit do?

And heres even more advanced code, which allows for any number of keys (it is set for the four arrow keys).

VB Code:

Option Explicit
 
Dim checkkeys As Boolean
Private Declare Function GetAsyncKeyState Lib "user32" (ByVal vKey As Long) As Integer
Private Declare Function GetTickCount Lib "kernel32" () As Long
 
Private Sub Form_Load()
    Me.Show
    DoEvents
    checkstuff
End Sub
 
Private Sub checkstuff()
 Dim tmpL&, bolDown As Boolean, bolUp As Boolean, bolLeft As Boolean, bolRight As Boolean
 Dim tmpS$, tmpL2&
 
 checkkeys = True
 Do While checkkeys = True
  If Not bolDown Then bolDown = GetAsyncKeyState(vbKeyDown)
  If Not bolUp Then bolUp = GetAsyncKeyState(vbKeyUp)
  If Not bolLeft Then bolLeft = GetAsyncKeyState(vbKeyLeft)
  If Not bolRight Then bolRight = GetAsyncKeyState(vbKeyRight)
        
  If (GetTickCount - tmpL) >= 100 Then
   tmpS = ""
   If bolDown Then
    tmpS = tmpS & "Down"
    bolDown = False
   End If
   If bolUp Then
    tmpS = tmpS & " Up"
    bolUp = False
   End If
   If bolLeft Then
    tmpS = tmpS & " Left"
    bolLeft = False
   End If
   If bolRight Then
    tmpS = tmpS & " Right"
    bolRight = False
   End If
   If tmpS = "" Then
    tmpS = "None"
   End If
   tmpS = Trim$(tmpS)
   
   tmpL = GetTickCount
  End If
  
  Me.Caption = tmpS
  DoEvents
 Loop
    
 Unload Me
End Sub
 
Private Sub Form_Unload(Cancel As Integer)
 If checkkeys Then
  checkkeys = False
  Cancel = -1
 End If
End Sub

Option Explicit is to make sure that all the varibles are defined. It is a good idea to set it to defualt. Look under tools-options-editor-require varible declaration. That is where it is in 6.0. It is to prevent errors from the wrong types of varibles being declared. Such as you need a string, and it defines it as an interger, or you need a long and it sets it to a single. It also increases speed, as you are less likely to have vareints in the program.

Heh sorry for the delay :p
Yeah my code is kinda like that, except that I use a 256 boolean array instead of a variable for each key :)

I was going to do that, but I figured that it would be too much work to convert it over. And if he really needed that he could ask.