I'm trying to make the printdialog (found in comdlg32.dll) window modal. Is it possible? If yes, how do I do it.
Printable View
I'm trying to make the printdialog (found in comdlg32.dll) window modal. Is it possible? If yes, how do I do it.
Here's what I would do if I had that question.
This will apply to other similar dilemmas where one has a question and no answer about a programable object in Visual Basic.
Put an instance of the object on a form. Be sure it has focus and press F2. Voila, you are in the Object Browser. Browse its Properties, Methods, Events and the Constants with hopefully nice little logical names.
In your instance, you will probably find a boolean constant listed such as cmdIsModal or the like.
:) You might also press F1 and a help file just for that control should be rendered for your lunch hour study.
:eek: Or, you might want to save it for when you wake up in the middle of the night and want to program...
[Edited by 23yearsofit on 03-23-2000 at 12:12 PM]
I was refering to the API PrintDialog (which is in comdlg32.dll), this is not an object that I can put on a form. I already searched the object browser. I know that I can modify the behavior of the PrintDialog by changing the Flags in the structure passed to the PrintDialog API, but I can't find one that will make the window modal (I'm talking here about the window opened by PrintDialog, which allows the user to select the printer and so on). I don't wanna use the ShowPrinter method from the common dialog control (this one from comdlg32.ocx) which has problems with NT.
Thanx.
Bye gone!
Well, I suggest since it is code you have written, post the Declaration and enough of a code snippet so anyone can run it immediately...and perhaps hack out a little solution...
If you set the hwndOwner member of the PrintDlg structure the dialog will be shown modal.
Good luck!Code:Private Type PrintDlg
lStructSize As Long
hwndOwner As Long
hDevMode As Long
hDevNames As Long
hdc As Long
flags As Long
nFromPage As Integer
nToPage As Integer
nMinPage As Integer
nMaxPage As Integer
nCopies As Integer
hInstance As Long
lCustData As Long
lpfnPrintHook As Long
lpfnSetupHook As Long
lpPrintTemplateName As String
lpSetupTemplateName As String
hPrintTemplate As Long
hSetupTemplate As Long
End Type
Private Declare Function PrintDlg _
Lib "comdlg32.dll" Alias "PrintDlgA" ( _
pPrintdlg As PrintDlg) As Long
Private Sub Command1_Click()
Dim udtPrDlg As PrintDlg
Dim lngRetVal As Long
With udtPrDlg
.lStructSize = Len(udtPrDlg)
.hwndOwner = Me.hWnd
'set other struct members here
End With
lngRetVal = PrintDlg(udtPrDlg)
End Sub
Thanx Joacim, in deed, by setting the hwndOwner member of the PrintDlg structure the dialog will be shown modal. But when you have more than one form in your project, the dialog is modal only for the form you did set as hwndOwner, allowing the user to perform any operations on other opened forms. Then, it is possible to type something in a 3 veiw control on a form which is not set as the hwndOwner, in that case, the form keypress event is not raised. So, what I would like, is to have the print dialog modal to the whole application.
Here is a simple test that will show what I experienced:
1)create a new project with 2 forms an one module;
2)on form1, add a cmd button;
3)on form2, add a TreeView control (you must add 'MICROSOFT WINDOWS COMMON CONTROLS 6.0 component before);
4)in the module, add this code:
----------------------------------------------------------- Option Explicit
' Global constants for Win32 API
Public Const CCHDEVICENAME = 32
Public Const CCHFORMNAME = 32
Public Const GMEM_FIXED = &H0
Public Const GMEM_MOVEABLE = &H2
Public Const GMEM_ZEROINIT = &H40
' Add appropriate Constants for what you want to change
Public Const DM_DUPLEX = &H1000&
Public Const DM_ORIENTATION = &H1&
Public Const DM_COPIES = &H100&
Public Const DMDUP_HORIZONTAL = 3
Public Const DMDUP_SIMPLEX = 1
Public Const DMDUP_VERTICAL = 2
' Constants for PrintDialog
Public Const PD_ALLPAGES = &H0
Public Const PD_COLLATE = &H10
Public Const PD_DISABLEPRINTTOFILE = &H80000
Public Const PD_ENABLEPRINTHOOK = &H1000
Public Const PD_ENABLEPRINTTEMPLATE = &H4000
Public Const PD_ENABLEPRINTTEMPLATEHANDLE = &H10000
Public Const PD_ENABLESETUPHOOK = &H2000
Public Const PD_ENABLESETUPTEMPLATE = &H8000
Public Const PD_ENABLESETUPTEMPLATEHANDLE = &H20000
Public Const PD_HIDEPRINTTOFILE = &H100000
Public Const PD_NONETWORKBUTTON = &H200000
Public Const PD_NOPAGENUMS = &H8
Public Const PD_NOSELECTION = &H4
Public Const PD_NOWARNING = &H80
Public Const PD_PAGENUMS = &H2
Public Const PD_PRINTSETUP = &H40
Public Const PD_PRINTTOFILE = &H20
Public Const PD_RETURNDC = &H100
Public Const PD_RETURNDEFAULT = &H400
Public Const PD_RETURNIC = &H200
Public Const PD_SELECTION = &H1
Public Const PD_SHOWHELP = &H800
Public Const PD_USEDEVMODECOPIES = &H40000
Public Const PD_USEDEVMODECOPIESANDCOLLATE = &H40000
' Constants for PAGESETUPDLG
Public Const PSD_DEFAULTMINMARGINS = &H0
Public Const PSD_DISABLEMARGINS = &H10
Public Const PSD_DISABLEORIENTATION = &H100
Public Const PSD_DISABLEPAGEPAINTING = &H80000
Public Const PSD_DISABLEPAPER = &H200
Public Const PSD_DISABLEPRINTER = &H20
Public Const PSD_ENABLEPAGEPAINTHOOK = &H40000
Public Const PSD_ENABLEPAGESETUPHOOK = &H2000
Public Const PSD_ENABLEPAGESETUPTEMPLATE = &H8000
Public Const PSD_ENABLEPAGESETUPTEMPLATEHANDLE = &H20000
Public Const PSD_INHUNDREDTHSOFMILLIMETERS = &H8
Public Const PSD_INTHOUSANDTHSOFINCHES = &H4
Public Const PSD_INWININIINTLMEASURE = &H0
Public Const PSD_MARGINS = &H2
Public Const PSD_MINMARGINS = &H1
Public Const PSD_NOWARNING = &H80
Public Const PSD_RETURNDEFAULT = &H400
Public Const PSD_SHOWHELP = &H800
' Custom Global Constants
Public Const DLG_PRINT = 0
Public Const DLG_PRINTSETUP = 1
' type definitions:
Public Type RECT
Left As Long
Top As Long
Right As Long
Bottom As Long
End Type
Public Type POINTAPI
X As Long
Y As Long
End Type
Type PRINTSETUPDLG_TYPE
lStructSize As Long
hwndOwner As Long
hDevMode As Long
hDevNames As Long
flags As Long
ptPaperSize As POINTAPI
rtMinMargin As RECT
rtMargin As RECT
hInstance As Long
lCustData As Long
lpfnPageSetupHook As Long ' LPPAGESETUPHOOK
lpfnPagePaintHook As Long ' LPPAGESETUPHOOK
lpPageSetupTemplateName As String
hPageSetupTemplate As Long ' HGLOBAL
End Type
Type PRINTDLG_TYPE
lStructSize As Long
hwndOwner As Long
hDevMode As Long
hDevNames As Long
hdc As Long
flags As Long
nFromPage As Integer
nToPage As Integer
nMinPage As Integer
nMaxPage As Integer
nCopies As Integer
hInstance As Long
lCustData As Long
lpfnPrintHook As Long
lpfnSetupHook As Long
lpPrintTemplateName As String
lpSetupTemplateName As String
hPrintTemplate As Long
hSetupTemplate As Long
End Type
Type DEVNAMES_TYPE
wDriverOffset As Integer
wDeviceOffset As Integer
wOutputOffset As Integer
wDefault As Integer
extra As String * 100
End Type
Type DEVMODE_TYPE
dmDeviceName As String * CCHDEVICENAME
dmSpecVersion As Integer
dmDriverVersion As Integer
dmSize As Integer
dmDriverExtra As Integer
dmFields As Long
dmOrientation As Integer
dmPaperSize As Integer
dmPaperLength As Integer
dmPaperWidth As Integer
dmScale As Integer
dmCopies As Integer
dmDefaultSource As Integer
dmPrintQuality As Integer
dmColor As Integer
dmDuplex As Integer
dmYResolution As Integer
dmTTOption As Integer
dmCollate As Integer
dmFormName As String * CCHFORMNAME
dmUnusedPadding As Integer
dmBitsPerPel As Integer
dmPelsWidth As Long
dmPelsHeight As Long
dmDisplayFlags As Long
dmDisplayFrequency As Long
End Type
' API declarations:
Public Declare Function PrintDialog Lib "comdlg32.dll" _
Alias "PrintDlgA" (pPrintdlg As PRINTDLG_TYPE) As Long
Public Declare Sub CopyMemory Lib "kernel32" _
Alias "RtlMoveMemory" _
(hpvDest As Any, hpvSource As Any, ByVal cbCopy As Long)
Public Declare Function GlobalLock Lib "kernel32" _
(ByVal hMem As Long) As Long
Public Declare Function GlobalUnlock Lib "kernel32" _
(ByVal hMem As Long) As Long
Public Declare Function GlobalAlloc Lib "kernel32" _
(ByVal wFlags As Long, ByVal dwBytes As Long) As Long
Public Declare Function GlobalFree Lib "kernel32" _
(ByVal hMem As Long) As Long
Public Sub ShowPrinter(frmOwner As Form, _
Optional PrintFlags As Long)
Dim PrintDlg As PRINTDLG_TYPE
Dim DevMode As DEVMODE_TYPE
Dim DevName As DEVNAMES_TYPE
Dim lpDevMode As Long, lpDevName As Long
Dim bReturn As Integer
Dim objPrinter As Printer, NewPrinterName As String
Dim strSetting As String
' Use PrintSetupDialog to get the handle to a memory
' block with a DevMode and DevName structures
PrintDlg.lStructSize = Len(PrintDlg)
PrintDlg.hwndOwner = frmOwner.hWnd
PrintDlg.flags = PrintFlags
' Set the current orientation and duplex setting
DevMode.dmDeviceName = Printer.DeviceName
DevMode.dmSize = Len(DevMode)
DevMode.dmFields = DM_ORIENTATION Or DM_DUPLEX _
Or DM_COPIES
DevMode.dmOrientation = Printer.Orientation
DevMode.dmCopies = Printer.Copies
On Error Resume Next
DevMode.dmDuplex = Printer.Duplex
On Error GoTo 0
' Allocate memory for the initialization hDevMode structure
' and copy the settings gathered above into this memory
PrintDlg.hDevMode = GlobalAlloc(GMEM_MOVEABLE Or _
GMEM_ZEROINIT, Len(DevMode))
lpDevMode = GlobalLock(PrintDlg.hDevMode)
If lpDevMode > 0 Then
CopyMemory ByVal lpDevMode, DevMode, Len(DevMode)
bReturn = GlobalUnlock(PrintDlg.hDevMode)
End If
' Set the current driver, device, and port name strings
With DevName
.wDriverOffset = 8
.wDeviceOffset = .wDriverOffset + 1 + Len(Printer.DriverName)
.wOutputOffset = .wDeviceOffset + 1 + Len(Printer.Port)
.wDefault = 0
End With
With Printer
DevName.extra = .DriverName & Chr(0) & _
.DeviceName & Chr(0) & .Port & Chr(0)
End With
' Allocate memory for the initial hDevName structure
' and copy the settings gathered above into this memory
PrintDlg.hDevNames = GlobalAlloc(GMEM_MOVEABLE Or _
GMEM_ZEROINIT, Len(DevName))
lpDevName = GlobalLock(PrintDlg.hDevNames)
If lpDevName > 0 Then
CopyMemory ByVal lpDevName, DevName, Len(DevName)
bReturn = GlobalUnlock(lpDevName)
End If
' Call the print dialog up and let the user make changes
If PrintDialog(PrintDlg) Then
' First get the DevName structure.
lpDevName = GlobalLock(PrintDlg.hDevNames)
CopyMemory DevName, ByVal lpDevName, 45
bReturn = GlobalUnlock(lpDevName)
GlobalFree PrintDlg.hDevNames
' Next get the DevMode structure and set the printer
' properties appropriately
lpDevMode = GlobalLock(PrintDlg.hDevMode)
CopyMemory DevMode, ByVal lpDevMode, Len(DevMode)
bReturn = GlobalUnlock(PrintDlg.hDevMode)
GlobalFree PrintDlg.hDevMode
NewPrinterName = UCase$(Left(DevMode.dmDeviceName, _
InStr(DevMode.dmDeviceName, Chr$(0)) - 1))
If Printer.DeviceName <> NewPrinterName Then
For Each objPrinter In Printers
If UCase$(objPrinter.DeviceName) = NewPrinterName Then
Set Printer = objPrinter
End If
Next
End If
On Error Resume Next
' Set printer object properties according to selections made
' by user
DoEvents
With Printer
.Copies = DevMode.dmCopies
.Duplex = DevMode.dmDuplex
.Orientation = DevMode.dmOrientation
End With
On Error GoTo 0
End If
End Sub
-----------------------------------------------------------
5)in form1, add this code:
-----------------------------------------------------------
Private Sub Command1_Click()
ShowPrinter Me, PD_HIDEPRINTTOFILE
End Sub
Private Sub Form_Load()
Form2.Show
End Sub
-----------------------------------------------------------
6)in form2, add this code:
-----------------------------------------------------------
Private Sub Form_KeyPress(KeyAscii As Integer)
Debug.Print "form2 key pressed"
End Sub
-----------------------------------------------------------
NOW, test it!
Thanx in advance to anyone who will help!