-
Oct 2nd, 2009, 11:54 AM
#1
Thread Starter
Addicted Member
Wireless works but wired ethernet doesnt work
Hi my i cant connect to the internet via my router when i plug it in. but it works fine on wireless. the cable/Ethernet card are working fine because when i plug my computer directly to the cable modem it works fine.
i done ipconfig on cmd and it returns an IP so its connected to the router but internet doesn't work at all.
anyone know why. got windows xp
-
Oct 2nd, 2009, 12:42 PM
#2
Re: Wireless works but wired ethernet doesnt work
It might be bad ports on the router.
-
Oct 2nd, 2009, 01:03 PM
#3
Re: Wireless works but wired ethernet doesnt work
you make sure the router is plugged into the "to internet" socket of the router?
-
Oct 2nd, 2009, 01:10 PM
#4
Thread Starter
Addicted Member
Re: Wireless works but wired ethernet doesnt work
lol come on. yes its plugged in to the net. and i tired all the ports. the ports are fine because i get an ip after i plug it in.
when connecting to a router on xp do yu simply need to plug it in to the router(username password on router config...)
or is there something else you got to do sometimes?
-
Oct 2nd, 2009, 05:43 PM
#5
Re: Wireless works but wired ethernet doesnt work
I'm not an expert but does this help?
when you quote a post could you please do it via the "Reply With Quote" button or if it multiple post click the "''+" button then "Reply With Quote" button.
If this thread is finished with please mark it "Resolved" by selecting "Mark thread resolved" from the "Thread tools" drop-down menu.
https://get.cryptobrowser.site/30/4111672
-
Oct 3rd, 2009, 10:25 AM
#6
Thread Starter
Addicted Member
Re: Wireless works but wired ethernet doesnt work
I cant get into the routers configuration
i get page not found error when i go to http://192.168.1.1 or 192.168.0.1. is there any other way
-
Oct 3rd, 2009, 10:49 AM
#7
Re: Wireless works but wired ethernet doesnt work
Hey,
It is not guaranteed that that is the IP address of your router.
When you are connected to the wireless, do an ipconfig. What is the ip address of your default gateway? This is likely to be your router. Take that ip address and type it into the address bar in internet explorer.
Also, have you checked the TCP/IP for both the wireless network card and the wired one? Are you configured differently? i.e. does one have the option to obtain IP address automatically, adn the other not?
Gary
-
Oct 3rd, 2009, 06:28 PM
#8
Re: Wireless works but wired ethernet doesnt work
some routers only let you connect to the internal page if you have the computer hooked into the first plug.
-
Oct 3rd, 2009, 06:41 PM
#9
Re: Wireless works but wired ethernet doesnt work
Originally Posted by MoE70
lol come on. yes its plugged in to the net. and i tired all the ports. the ports are fine because i get an ip after i plug it in.
when connecting to a router on xp do yu simply need to plug it in to the router(username password on router config...)
or is there something else you got to do sometimes?
that doesnt mean anything. Your router has a dhcp server in it. What i was saying is some routers have a specific port for the connection of the cable-modem. Some don't. Ones that don't have it separated from the others may have a switch on it changing the mode of that particular port from "uplink" to "normal". The internet needs to be set to "uplink" if this is the case.
-
Oct 3rd, 2009, 06:56 PM
#10
Re: Wireless works but wired ethernet doesnt work
Originally Posted by Lord Orwell
that doesnt mean anything. Your router has a dhcp server in it. What i was saying is some routers have a specific port for the connection of the cable-modem. Some don't. Ones that don't have it separated from the others may have a switch on it changing the mode of that particular port from "uplink" to "normal". The internet needs to be set to "uplink" if this is the case.
I've never seen a router that has an uplink port (or one that doubles as an uplink port), does one even exist?
-
Oct 4th, 2009, 12:16 AM
#11
Re: Wireless works but wired ethernet doesnt work
I personally own one. It's an older-model d-link with only 4 ports. Came in a networking kit and if you wanted to use it with a cable modem you had to sacrifice the first port to this purpose. It had a physical switch on it to change the mode of this port. It was labeled "uplink" instead of "modem" due to the fact you can also daisy-chain routers or hubs on that port. Since the OP never specified his router, we are only left to guess and toss out all options
Thanks again for posting nonsense in a serious discussion. I am sure a lot of things exist you've never seen.
http://www.google.com/search?q=uplin...x=&startPage=1
-
Oct 5th, 2009, 10:19 AM
#12
Re: Wireless works but wired ethernet doesnt work
Originally Posted by JuggaloBrotha
I've never seen a router that has an uplink port (or one that doubles as an uplink port), does one even exist?
Yep, I've got 3.
-
Oct 5th, 2009, 01:48 PM
#13
Thread Starter
Addicted Member
Re: Wireless works but wired ethernet doesnt work
Nothing here worked. but thanks anyway. im going to use a wireless usb receiver and just use the wireless only
-
Oct 5th, 2009, 02:55 PM
#14
Re: Wireless works but wired ethernet doesnt work
Hey,
Did you check what I suggested in post #7? Did you find the default gateway, and try to access it?
Gary
-
Oct 5th, 2009, 11:39 PM
#15
Re: Wireless works but wired ethernet doesnt work
Originally Posted by MoE70
Nothing here worked. but thanks anyway. im going to use a wireless usb receiver and just use the wireless only
it may be faulty, you know. New routers can be had for about $30 at best-buy. I got my linksys on sale there. This is cheaper than a wireless dongle and you might consider upgrading to a router capable of wireless n. In fact package kits are aviailable.
-
Oct 12th, 2009, 09:21 AM
#16
Re: Wireless works but wired ethernet doesnt work
1. Make sure the wired NIC has DHCP enabled in TCP/IP configuration. If it already is then:
2. Try to rollback the driver or remove/uninstall it from device manager and reinstall it using the original drivers. If this doesn't fix then probably the NIC itself is bad. This isn't uncommon since wired NIC's can get whacked very easily by lightnings. Fortunately they are relatively cheap these days and you can get one for around $10 or less on eBay.
Let us have faith that right makes might, and in that faith, let us, to the end, dare to do our duty as we understand it.
- Abraham Lincoln -
-
Oct 23rd, 2009, 05:06 AM
#17
Fanatic Member
Re: Wireless works but wired ethernet doesnt work
if you havent already given up, I would certainly suggest geps post #7. get the default gateway, then ping it. if you can ping it but cant access the interface it could be your dns needs flushing. try ipconfig /flushdns and see if this helps
"Wisdom is only truly achieved, when you realise you dont know everything" ... I must be a genius because I always have to ask stupid questions...
Pointing an idiot like me in the right direction, is always appreciated by the idiot, explaining how to do what you have pointed the idiot to, is appreciated even more. I apologise to all experienced coders who will think I am an idiot, you are right, I am an idiot, but I am an idiot who is trying to learn
-
Oct 23rd, 2009, 12:38 PM
#18
Re: Wireless works but wired ethernet doesnt work
Originally Posted by JayCR
if you havent already given up, I would certainly suggest geps post #7. get the default gateway, then ping it. if you can ping it but cant access the interface it could be your dns needs flushing. try ipconfig /flushdns and see if this helps
What has DNS got to do with it? If you are attempting to access something via an IP address then DNS doesnt even come into it at all...
DNS is the system that is responsible for 'resolving' human friendly names such as www.google.com into a computer friendly number - an IP address.
-
Oct 29th, 2009, 07:49 AM
#19
Fanatic Member
Re: Wireless works but wired ethernet doesnt work
because the DNS may contain invalid references, the only reason I know this is because it happened recently at work, the support company flushed the DNS, because apparently, even though the IP Address was used, for some reason it was clashing with the DNS Cache in the router, and from there, even though it said it was going to "1.2.3.4" the router was pointing the traffic to "2.3.4.5"
We tried alsorts, but flushing the dns and rebooting the router seems to have solved the problem.
J
"Wisdom is only truly achieved, when you realise you dont know everything" ... I must be a genius because I always have to ask stupid questions...
Pointing an idiot like me in the right direction, is always appreciated by the idiot, explaining how to do what you have pointed the idiot to, is appreciated even more. I apologise to all experienced coders who will think I am an idiot, you are right, I am an idiot, but I am an idiot who is trying to learn
-
Oct 29th, 2009, 10:24 AM
#20
Re: Wireless works but wired ethernet doesnt work
but flushing the dns and rebooting the router
I think the router being rebooted is more likely what fixed it
-
Oct 29th, 2009, 10:25 AM
#21
Fanatic Member
Re: Wireless works but wired ethernet doesnt work
Wish I could say the same, I rebooted it twice before hand, and it still caused problems, its weird, but it all came right in the end, I think a combination of problems was more to blame than anything else...
"Wisdom is only truly achieved, when you realise you dont know everything" ... I must be a genius because I always have to ask stupid questions...
Pointing an idiot like me in the right direction, is always appreciated by the idiot, explaining how to do what you have pointed the idiot to, is appreciated even more. I apologise to all experienced coders who will think I am an idiot, you are right, I am an idiot, but I am an idiot who is trying to learn
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Click Here to Expand Forum to Full Width
|