Command text was not set for the command object.-VBForums
Results 1 to 17 of 17

Thread: Command text was not set for the command object.

  1. #1

    Thread Starter
    Member
    Join Date
    Apr 2008
    Posts
    35

    Command text was not set for the command object.

    Hello
    I worked with this program couple of weeks ago and it worked properly but now I don't know why i get this error message when i try to insert new record. However it inserts and adds new record to the table it stops running and displays an error message"Command text was not set for the command object."
    the arrow points to line started by >>>dataAdapter.Fill(studentTable)
    this is not the completed code and in access database all field types are text.
    any suggestion would be appreciated.

    Thanks

    global variables

    Code:
        Dim dataAdapter As OleDb.OleDbDataAdapter
        Dim studentTable As New DataTable
        Dim moduleTable As New DataTable
        Dim optionTable As New DataTable
        Dim searchTable As New DataTable
        Dim markTable As New DataTable
        Dim resultTable As New DataTable
        Dim sqlStr As String
        Dim connStr As String
        Dim recordCount As Integer
    Code:
        'INSERT
        Private Sub btnInsert_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnInsert.Click
            Dim IdNumber As String
            Dim studentName As String
            Dim DOB As String
            Dim year As String
            Dim route As String
            Dim optionTaken As String
            Dim connection As New OleDb.OleDbConnection(connStr)
            Dim insertOledbCommand As New OleDb.OleDbCommand
    
            IdNumber = InputBox("Type in the ID Number")
            studentName = InputBox("type in the Student Name")
            DOB = InputBox("type in the Date of Birth")
            year = InputBox("type in the Year")
            route = InputBox("type in the Route type")
            optionTaken = InputBox("type in the Option Taken")
    
            sqlStr = "INSERT INTO tblStudentsDetails VALUES('" & IdNumber & "', '" & studentName & "', '" & DOB & "', '" & year & "', '" & route & "', '" & optionTaken & "')"
    
            txtsqlCommand.Text = sqlStr
    
            ' setup for insertion
            connection.Open()
            insertOledbCommand.Connection = connection
            insertOledbCommand.CommandText = sqlStr
            ' do the insertion
            dataAdapter.InsertCommand = insertOledbCommand
            dataAdapter.InsertCommand.ExecuteNonQuery()
            connection.Close()
            'display the insertion on datagrid
            studentTable.Clear()
            dataAdapter.Fill(studentTable)
            DataGridView1.DataSource = studentTable
    
    
        End Sub

  2. #2
    Lively Member
    Join Date
    Aug 2007
    Posts
    86

    Re: Command text was not set for the command object.

    where is your dataadapter select statement defined?

  3. #3
    Frenzied Member
    Join Date
    May 2006
    Location
    Toronto, ON
    Posts
    1,093

    Re: Command text was not set for the command object.

    You have an insert command set for the data adapter, but you don't have a select command. Since you haven't told it how to fill it yet, it errors out when you try to do so.
    (VB/C#) is clearly superior to (C#/VB) because it (has/doesn't have) <insert trivial difference here>.

  4. #4

    Thread Starter
    Member
    Join Date
    Apr 2008
    Posts
    35

    Re: Command text was not set for the command object.

    how can I do it? I don't know. Could you please explain more.

    Code:
        Private Sub displayByOption_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
            dataAdapter = New OleDb.OleDbDataAdapter(sqlStr, connStr)
        End Sub
    do you mean this line?
    Thanks
    Last edited by jojo13; Apr 17th, 2008 at 04:24 AM.

  5. #5
    Lively Member
    Join Date
    Aug 2007
    Posts
    86

    Re: Command text was not set for the command object.

    yes, as long as you have defined sqlSTR and ConnStr.

    Your sqlSTR must be the sql query which returns the data you want when you type dataAdapter.Fill(studentTable)

  6. #6

    Thread Starter
    Member
    Join Date
    Apr 2008
    Posts
    35

    Re: Command text was not set for the command object.

    I have this line but I still got this error message!!!
    Oh I don't know why but the error message differ from the last one I did not make any changes,error is "data type mismatch in criteria expression" and points to line dataAdapter.InsertCommand.ExecuteNonQuery()
    any ideas???
    Last edited by jojo13; Apr 17th, 2008 at 04:46 AM.

  7. #7

    Thread Starter
    Member
    Join Date
    Apr 2008
    Posts
    35

    Re: Command text was not set for the command object.

    oh my god I now have the same error for my Delete record codes!!!!
    dataAdapter.InsertCommand.ExecuteNonQuery()
    what is wrong with these codes??

    Code:
        'DELETE
        Private Sub btnDelete_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnDelete.Click
            Dim connection As New OleDb.OleDbConnection(connStr)
            Dim deleteOledbCommand As New OleDb.OleDbCommand
            Dim deleteRows As Integer
            Dim deleteId As String
    
            deleteId = InputBox("type in the ID Number to delete")
            sqlStr = "DELETE FROM tblStudentsDetails WHERE IDNumber = " _
                      & " '" & deleteId & " ' "
    
            txtsqlCommand.Text = sqlStr
            connection.Open()
            ' make a sql delete command
            deleteOledbCommand.Connection = connection
            deleteOledbCommand.CommandText = sqlStr
    
            ' activate the deletion
            dataAdapter.DeleteCommand = deleteOledbCommand
            deleteRows = dataAdapter.DeleteCommand.ExecuteNonQuery
            If deleteRows = 0 Then
                MessageBox.Show("Deletion Not Done!! problems . . .")
    
            Else
                MessageBox.Show("Delection Successfull!!")
                sqlStr = "SELECT * FROM tblStudentsDetails"
                txtsqlCommand.Text = sqlStr
                dataAdapter.SelectCommand.CommandText = sqlStr
                studentTable.Clear()
                dataAdapter.Fill(studentTable)
    
            End If
    
        End Sub
    I really need help for it

  8. #8
    Lively Member
    Join Date
    Aug 2007
    Posts
    86

    Re: Command text was not set for the command object.

    to use a dataadapter you need to define the select command first. try

    Code:
        'DELETE
        Private Sub btnDelete_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnDelete.Click
            Dim connection As New OleDb.OleDbConnection(connStr)
            Dim deleteOledbCommand As New OleDb.OleDbCommand
            Dim deleteRows As Integer
            Dim deleteId As String
            'Assign select commad here
            dataAdapter.SelectCommand.CommandText = "SELECT * FROM tblStudentsDetails"
            deleteId = InputBox("type in the ID Number to delete")
            sqlStr = "DELETE FROM tblStudentsDetails WHERE IDNumber = " _
                      & " '" & deleteId & " ' "
    
            txtsqlCommand.Text = sqlStr
            connection.Open()
            ' make a sql delete command
            deleteOledbCommand.Connection = connection
            deleteOledbCommand.CommandText = sqlStr
    
            ' activate the deletion
            dataAdapter.DeleteCommand = deleteOledbCommand
            deleteRows = dataAdapter.DeleteCommand.ExecuteNonQuery
            If deleteRows = 0 Then
                MessageBox.Show("Deletion Not Done!! problems . . .")
    
            Else
                MessageBox.Show("Delection Successfull!!")
                sqlStr = "SELECT * FROM tblStudentsDetails"
                txtsqlCommand.Text = sqlStr
                
                studentTable.Clear()
                dataAdapter.Fill(studentTable)
    
            End If
    
        End Sub

  9. #9

    Thread Starter
    Member
    Join Date
    Apr 2008
    Posts
    35

    Re: Command text was not set for the command object.

    Thanks jroger
    but I have a problem and that is the program works on saturdays and doesn't work on sundays. you know what I mean sometimes work properly even with the last code but sometime shows that error message and now it works but does not delete it it says deletion successful but doesn't reload the table. and I don't know what is the relation between insert and delete they both have the same problem.
    any suggestions?

    Thanks

  10. #10
    Lively Member
    Join Date
    Aug 2007
    Posts
    86

    Re: Command text was not set for the command object.

    you have dataadapter and odataadapter what is the difference.. can you post the complete code and I will take a look

  11. #11

    Thread Starter
    Member
    Join Date
    Apr 2008
    Posts
    35

    Re: Command text was not set for the command object.

    here is the code for form1, I mean main form, in 2 posts.I have different form for some action and they work properly. at the moment the problem is insert and delete.they borh work but for insert it display the run time error"Command text was not set for the command object." and for deelete it does say deletion successful but doesn't reload the table.

    thanks for your support


    Code:
    Public Class Form1
        Dim dataAdapter As OleDb.OleDbDataAdapter
        Dim studentTable As New DataTable
        Dim moduleTable As New DataTable
        Dim optionTable As New DataTable
        Dim searchTable As New DataTable
        Dim markTable As New DataTable
        Dim resultTable As New DataTable
        Dim sqlStr As String
        Dim connStr As String
        Dim recordCount As Integer
    
    
    
        Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
            Form2.Visible = False
            chart.Visible = False
            connStr = "PROVIDER = Microsoft.jet.OLEDB.4.0;" _
              & "Data Source = dataBase.mdb"
    
            dataAdapter = New OleDb.OleDbDataAdapter(sqlStr, connStr)
    
    
    
        End Sub
    
        'Display Table and options
    
        Private Sub btnDisplayGrid_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnDisplayGrid.Click
            Form3.Show()
    
        End Sub
        'COUNTER
        Private Sub btnRecordCount_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnRecordCount.Click
            Dim recCount As Integer
    
            studentTable.Clear()
            sqlStr = "SELECT * FROM tblStudentsDetails"
            txtSqlCommand.Text = sqlStr
            dataAdapter.SelectCommand.CommandText = sqlStr
            recCount = dataAdapter.Fill(studentTable)
    
            MessageBox.Show("There are " & recCount & " records")
    
        End Sub
        'UPDATE
        Private Sub btnUpdateGrid_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnUpdateGrid.Click
            Dim changes As Integer
            Dim dataAdapter1 As New OleDb.OleDbDataAdapter(sqlStr, connStr)
            Dim commandBuilder As New OleDb.OleDbCommandBuilder(dataAdapter1)
    
            changes = dataAdapter1.Update(studentTable)
            dataAdapter1.Dispose()
    
            If changes > 0 Then
                MessageBox.Show(changes & "modification in database!!")
            Else
                MessageBox.Show("No changes!!")
            End If
        End Sub
    
        'FIND
        Private Sub btnFindStudent_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnFindStudent.Click
            Find.Show()
    
        End Sub
        'INSERT
        Private Sub btnInsert_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnInsert.Click
            Dim IdNumber As String
            Dim studentName As String
            Dim DOB As String
            Dim year As String
            Dim route As String
            Dim optionTaken As String
            Dim connection As New OleDb.OleDbConnection(connStr)
            Dim insertOledbCommand As New OleDb.OleDbCommand
    
            IdNumber = InputBox("Type in the ID Number")
            studentName = InputBox("type in the Student Name")
            DOB = InputBox("type in the Date of Birth")
            year = InputBox("type in the Year")
            route = InputBox("type in the Route type")
            optionTaken = InputBox("type in the Option Taken")
    
            sqlStr = "INSERT INTO tblStudentsDetails VALUES('" & IdNumber & "', '" & studentName & "', '" & DOB & "', '" & year & "', '" & route & "', '" & optionTaken & "')"
    
            txtsqlCommand.Text = sqlStr
    
            ' setup for insertion
            connection.Open()
            insertOledbCommand.Connection = connection
            insertOledbCommand.CommandText = sqlStr
            ' do the insertion
            dataAdapter.InsertCommand = insertOledbCommand
            dataAdapter.InsertCommand.ExecuteNonQuery()
            connection.Close()
            'display the insertion on datagrid
            studentTable.Clear()
            dataAdapter.Fill(studentTable)
            DataGridView1.DataSource = studentTable
    
    
        End Sub
        'DELETE
        Private Sub btnDelete_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnDelete.Click
            Dim connection As New OleDb.OleDbConnection(connStr)
            Dim deleteOledbCommand As New OleDb.OleDbCommand
            Dim deleteRows As Integer
            Dim deleteId As String
            'Assign select commad here
            dataAdapter.SelectCommand.CommandText = "SELECT * FROM tblStudentsDetails"
            deleteId = InputBox("type in the ID Number to delete")
            sqlStr = "DELETE FROM tblStudentsDetails WHERE IDNumber = " _
                      & " '" & deleteId & " ' "
    
            txtsqlCommand.Text = sqlStr
            connection.Open()
            ' make a sql delete command
            deleteOledbCommand.Connection = connection
            deleteOledbCommand.CommandText = sqlStr
    
            ' activate the deletion
            dataAdapter.DeleteCommand = deleteOledbCommand
            deleteRows = dataAdapter.DeleteCommand.ExecuteNonQuery
            If deleteRows = 0 Then
                MessageBox.Show("Deletion Not Done!! problems . . .")
    
            Else
                MessageBox.Show("Delection Successfull!!")
                sqlStr = "SELECT * FROM tblStudentsDetails"
                txtsqlCommand.Text = sqlStr
    
                studentTable.Clear()
                dataAdapter.Fill(studentTable)
    
            End If
    
        End Sub
    
        'SORT BY OPTION
        Private Sub btnDisplayByOption_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnDisplayByOption.Click
            displayByOption.Show()
        End Sub
        'EXIT
        Private Sub btnExitProgram_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnExitProgram.Click
            dataAdapter.Dispose()
            End
    
        End Sub
    
    
        'MENU>VIEW
    
        Private Sub StudentsDetailsTableToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles StudentsDetailsTableToolStripMenuItem.Click
            studentTable.Clear()
            DataGridView1.Visible = True
            sqlStr = "SELECT * FROM tblStudentsDetails"
            txtSqlCommand.Text = sqlStr
            Dim dataAdapter As New OleDb.OleDbDataAdapter(sqlStr, connStr)
            dataAdapter.Fill(studentTable)
            dataAdapter.Dispose()
            DataGridView1.DataSource = studentTable
        End Sub
    
        Private Sub DisplayBySpecToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles DisplayBySpecToolStripMenuItem.Click
            Dim particularOption As String
            Dim recCount As Integer
    
            DataGridView2.DataSource = searchTable
            particularOption = InputBox("type in the Option to search")
            sqlStr = "SELECT * FROM tblStudentsDetails WHERE " _
                     & "OptionTaken = '" & particularOption & "' "
            txtSqlCommand.Text = sqlStr
    
            dataAdapter.SelectCommand.CommandText = sqlStr
    
            searchTable.Clear()
            recCount = dataAdapter.Fill(searchTable)
    
            If recCount <> 0 Then
    
                DataGridView2.Visible = True
            Else
                MessageBox.Show(" Option NOT found!!")
                DataGridView2.Visible = False
    
            End If
        End Sub
    
        Private Sub RecordCountToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles RecordCountToolStripMenuItem.Click
            Dim recCount As Integer
    
            studentTable.Clear()
            sqlStr = "SELECT * FROM tblStudentsDetails"
            txtSqlCommand.Text = sqlStr
            dataAdapter.SelectCommand.CommandText = sqlStr
            recCount = dataAdapter.Fill(studentTable)
    
            MessageBox.Show("There are " & recCount & " records")
        End Sub
        'MENU>SEARCH
        Private Sub FindRecordToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles FindRecordToolStripMenuItem.Click
            Dim findIDNumber As String
            Dim recCount As Integer
    
            DataGridView2.DataSource = searchTable
            findIDNumber = InputBox("type in the ID Number to search")
            sqlStr = "SELECT * FROM tblStudentsDetails WHERE " _
                     & "IDNumber = '" & findIDNumber & "' "
            txtSqlCommand.Text = sqlStr
    
            dataAdapter.SelectCommand.CommandText = sqlStr
            searchTable.Clear()
            recCount = dataAdapter.Fill(searchTable)
    
            If recCount <> 0 Then
    
                DataGridView2.Visible = True
            Else
                MessageBox.Show(" Record NOT found!!")
                DataGridView2.Visible = False
    
            End If
        End Sub

  12. #12

    Thread Starter
    Member
    Join Date
    Apr 2008
    Posts
    35

    Re: Command text was not set for the command object.

    (codes continued)

    Code:
        'MENU>FILE
        Private Sub InsertRecordToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles InsertRecordToolStripMenuItem.Click
            Dim IdNumber As String
            Dim studentName As String
            Dim DOB As String
            Dim year As String
            Dim route As String
            Dim optionTaken As String
            Dim connection As New OleDb.OleDbConnection(connStr)
            Dim insertOledbCommand As New OleDb.OleDbCommand
    
            IdNumber = InputBox("Type in the ID Number")
            studentName = InputBox("type in the Student Name")
            DOB = InputBox("type in the Date of Birth")
            year = InputBox("type in the Year")
            route = InputBox("type in the Route type")
            optionTaken = InputBox("type in the Option Taken")
    
            sqlStr = "INSERT INTO tblStudentsDetails VALUES('" & IdNumber & "', '" & studentName & "', '" & DOB & "', '" & year & "', '" & route & "', '" & optionTaken & "')"
    
            txtSqlCommand.Text = sqlStr
    
            ' setup for insertion
            connection.Open()
            insertOledbCommand.Connection = connection
            insertOledbCommand.CommandText = sqlStr
            ' do the insertion
            dataAdapter.InsertCommand = insertOledbCommand
            dataAdapter.InsertCommand.ExecuteNonQuery()
            connection.Close()
            'display the insertion on datagrid
            studentTable.Clear()
            dataAdapter.Fill(studentTable)
            DataGridView1.DataSource = studentTable
        End Sub
    
        Private Sub DeleteRecordToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles DeleteRecordToolStripMenuItem.Click
            Dim connection As New OleDb.OleDbConnection(connStr)
            Dim deleteOledbCommand As New OleDb.OleDbCommand
            Dim deleteRows As Integer
            Dim deleteId As String
    
            deleteId = InputBox("type in the ID Number to delete")
            sqlStr = "DELETE FROM tblStudentsDetails WHERE IDNumber = " _
                      & " '" & deleteId & " ' "
    
            txtSqlCommand.Text = sqlStr
            connection.Open()
            ' make a sql delete command
            deleteOledbCommand.Connection = connection
            deleteOledbCommand.CommandText = sqlStr
    
            ' activate the deletion
            dataAdapter.DeleteCommand = deleteOledbCommand
            deleteRows = dataAdapter.DeleteCommand.ExecuteNonQuery
            If deleteRows = 0 Then
                MessageBox.Show("Deletion Not Done!! problems . . .")
    
            Else
                MessageBox.Show("Delection Successfull!!")
                sqlStr = "SELECT * FROM tblStudentsDetails"
                txtSqlCommand.Text = sqlStr
                dataAdapter.SelectCommand.CommandText = sqlStr
                studentTable.Clear()
                dataAdapter.Fill(studentTable)
    
            End If
        End Sub
    
        Private Sub UpdateGridToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles UpdateGridToolStripMenuItem.Click
            Dim changes As Integer
            Dim dataAdapter1 As New OleDb.OleDbDataAdapter(sqlStr, connStr)
            Dim commandBuilder As New OleDb.OleDbCommandBuilder(dataAdapter1)
            changes = dataAdapter1.Update(studentTable)
            dataAdapter1.Dispose()
    
            If changes > 0 Then
                MessageBox.Show(changes & "modification in database!!")
            Else
                MessageBox.Show("No changes!!")
            End If
        End Sub
    
    
        Private Sub ExitToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles ExitToolStripMenuItem.Click
            dataAdapter.Dispose()
            End
    
        End Sub
    
        Private Sub ModuleTableToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles ModuleTableToolStripMenuItem.Click
            moduleTable.Clear()
            DataGridView1.Visible = True
            sqlStr = "SELECT * FROM tblModuleTable"
            txtSqlCommand.Text = sqlStr
            Dim dataAdapter As New OleDb.OleDbDataAdapter(sqlStr, connStr)
            dataAdapter.Fill(moduleTable)
            dataAdapter.Dispose()
            DataGridView1.DataSource = moduleTable
        End Sub
    
        Private Sub OptionTableToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles OptionTableToolStripMenuItem.Click
            optionTable.Clear()
            DataGridView1.Visible = True
            sqlStr = "SELECT * FROM qry_Places"
            txtSqlCommand.Text = sqlStr
            Dim dataAdapter As New OleDb.OleDbDataAdapter(sqlStr, connStr)
            dataAdapter.Fill(optionTable)
            dataAdapter.Dispose()
            DataGridView1.DataSource = optionTable
        End Sub
    
        Private Sub btnDisplayChart_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnDisplayChart.Click
            chart.Show()
        End Sub
    
        Private Sub btnMark_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnMark.Click
            markTable.Clear()
            DataGridView1.Visible = True
            sqlStr = "SELECT * FROM qry_Mark"
            txtSqlCommand.Text = sqlStr
            Dim dataAdapter As New OleDb.OleDbDataAdapter(sqlStr, connStr)
            dataAdapter.Fill(markTable)
            dataAdapter.Dispose()
            DataGridView1.DataSource = markTable
        End Sub
        Private Sub btnResult_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnResult.Click
    
            resultTable.Clear()
            DataGridView1.Visible = True
            sqlStr = "SELECT * FROM qry_Pass"
            txtSqlCommand.Text = sqlStr
            Dim dataAdapter As New OleDb.OleDbDataAdapter(sqlStr, connStr)
            dataAdapter.Fill(resultTable)
            dataAdapter.Dispose()
            DataGridView1.DataSource = resultTable
        End Sub
    End Class

  13. #13

    Thread Starter
    Member
    Join Date
    Apr 2008
    Posts
    35

    Re: Command text was not set for the command object.

    I add this line"dataAdapter.SelectCommand.CommandText = "SELECT * FROM tblStudentsDetails"" to the insert function and it works now,but deletion still has problem it doesn't reload the table
    Thanks

  14. #14
    Lively Member
    Join Date
    Aug 2007
    Posts
    86

    Re: Command text was not set for the command object.

    If I were you I would definitely have one dataadapter per datatable, and I would define them all to start with (including parameters) then when you want the data you can convcentrate on calling the required method of the relevant dataadapter.

  15. #15
    Lively Member
    Join Date
    Aug 2007
    Posts
    86

    Re: Command text was not set for the command object.

    add
    Code:
    datagridview1.datasource = nothing
    datagridview1.datasource = studenttable

  16. #16

    Thread Starter
    Member
    Join Date
    Apr 2008
    Posts
    35

    Resolved Re: Command text was not set for the command object.

    Thanks jrogers
    It works now. thanks for your advise as well.

    Cheers

  17. #17
    Registered User
    Join Date
    Nov 2013
    Posts
    1

    Re: Command text was not set for the command object.

    Mr. Jrogers can u help me too.. im having the same problem but it is data set..

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  



Featured


Click Here to Expand Forum to Full Width

Survey posted by VBForums.