Simple Maths Tutorial (Trigonometry)-VBForums
Results 1 to 8 of 8

Thread: Simple Maths Tutorial (Trigonometry)

Hybrid View

  1. #1

    Thread Starter
    New Member
    Join Date
    Jan 2008
    Location
    Sunny, Sunny England
    Posts
    4

    Simple Maths Tutorial (Trigonometry)

    First post on here and its gonna be a biggy (and hopefully a good one). I have not described uses for the calculations below as Trigonometry can be so broad at times and...well...I'm just too tired to think of any.

    Trigonometry

    First off, what is Trigonometry? Simply, its all to do with calculations of triangles. Finding their side lengths and angles and area is the most basic. I will start with the easiest type of triangle - the Right-Angled Triangle.

    Pythagoras's Theorem

    Many people should have heard of this before and most should know what it is but for those who don't I'll give a brief overview.
    Say I draw a triangle. It has sides A, B and C. The angle between sides B and C is 90 degrees. Pythagoras's Theorem states that the length of side A squared equals the length of side B squared plus the length of side C squared. For those who prefer it written out:



    For Example, if side B was length 3, and side C was length 4, side A squared would equal:
    3*3 + 4*4
    9 + 16
    25

    so A would equal the square root of 25 - 5


    Back in Pythagoras's day, they did not know about irrational numbers so when someone asked him what if B and C equaled one, he was so angry that he couldn't work out the square root of two that he threw that man off a boat to his death.

    SOHCAHTOA

    You may of heard of Sine and Cosine and Tangent (the function one not the line one) but their uses are often confused. First thing is that they are used ONLY in Right-Angled Triangles. That is why I titled this SOHCAHTOA - a name that will become clear.

    The SOH part.

    SOH stands for Sine of Angle, Opposite, Hypotenuse. The Hypotenuse (in case you didn't know) is the side that is not perpendicular to any other side in a Right-Angled Triangle. I.E. it is the side that doesnt not have one of its "end points touching" the right angle. The Opposite is the side that is...well...opposite the angle. The Sine of Angle is just that - the Sine of the Angle.
    Now you need 2 of these variables to calculate the third but I haven't helped much by just saying Sine, Opposite, Hypotenuse, have I? What you really need is the equation that links the 3 of them.


    That O with a line through is the symbol for an angle. Just move the equation round to find which parts you need ( Sine * Hyp. = Opp.),(Opp. / Sine = Hyp.).
    You cannot use the right angle as the angle in the equation . Only the other two angles.
    You may be asking, "Mike, what good is it to find out the Sine of the angle and not the angle itself?". Well there is a function called the inverse of Sine (normally written as Sine to the power of -1 which is a bit deceptive) to find out an angle when you've been given its Sine.
    That is all I'll say on Sine for now. I may come back to it in another time and show you the graph of Sine and where Sine comes from but for now, that is not necessary.
    FYI, Sine is normally written Sin.


    The CAH part.
    Like SOH, CAH is also an acronym. Cosine of Angle, Adjacent, Hypotenuse. This works the same as SOH BUT just using the side adjacent to the angle instead of opposite to it and you should find the Cosine of the angle instead of the Sine. There is also a inverse of Cosine which, again is written with a power of -1. The method of CAH is the same as SOH, just rearrange the part to find what you need.
    You will see Cosine written as Cos.


    The Last Part of SOHCAHTOA - TOA
    Again, this works the same as the last two except that TOA stands for Tangent (written as Tan) of Angle, Opposite, Adjacent. If you haven't spotted it yet, the middle letter of each acronym so far has been the numerator on the right and the and last letter the denominator. Remember this and SOHCAHTOA and you'll be a wizard in Trig in no time...
    Tan also has an inverse but the function "Tan" is a strange one. The Tangent of an angle is equal to the Sine of that angel divided by the Cosine of the angle. This produces a slightly strange graph and has what is called "Asymptotes" (spelled incorrectly probably) that is there is points on the graph where it has no value i.e. where the Cosine of the angle is equal to 0 and no real number can be divided by 0.

    For gaming, SOHCAHTOA isn't that useful unless you need an angle. Most things, it is easier to find the lengths without it but I put it here anyway.

    That's all for Right-Angled Triangles but what good is that if the triangle is not Right-Angled? Well there are a few things to help you there.


    The Sine rule

    Yup. It's our good old friend Sine again. This time he's back with another rule of his but this time, it is a bit more flexible.

    You dont need all 3 parts - only 2. Simple shifting in the equation will help you find parts you need: e.g. Sine a equals Sine b divided by B multiplied by A

    To find a side using the Sine Rule, the whole equation can be "flipped upside down" so that the lengths are on top and the angles on the bottom.
    e.g. A equals B divided by Sine b multiplied by Sine a

    That's the Sine Rule. Easy? Trigonometry is not as ferocious as its name. Time for another rule I think.


    Cosine Rule
    Just so I disappoint you now, no, there is no Tangent rule. There is a Cosine rule, however, which is a bit fiddly at times so I'll just go ahead and show you the two forms it's often seen in.



    As you can see, you need 3 sides or 2 sides and the angle between the sides to use the Cosine Rule. This works with all sides and angles:
    e.g. B squared = A squared + C squared - (2 * A * C * Cosine(b))
    And that is that with finding sides and angles so there's just one more thing left.


    Area of a Triangle
    Most people knows the simple "height * base divided by 2" equation for finding area of a Right-Angled Triangle but we should know now that Trigonometry just doesn't like being confided to just Right-Angled Triangles so it went a little further.
    (A * B * Sine of the angle between them) / 2
    It looks similar to the previous formula doesn't it? Well that's because the Sine of 90 is 1. Simple as that really.


    Note
    First one goes out to any moderators reading this. This is just a request but if you find a mistake, I would prefer you to tell me so that I can change it - I will be online often so I should be able to change it quickly.

    Second Note. For those you need to use Sine or Cosine or Tan in VB - VISUAL BASIC WORKS IN RADIANS. Unless you've learnt about Radians they're a pain but can be useful if you ever do A-Level maths. To convert between the two, before you use Sine or Cosine etc. on the angle, multiply the angle by (Pi divided by 180). Then use Sine or Cosine etc. to find the correct value. (Generally define Pi as a constant of 3.14 if pin-point accuracy is not required).

    Lastly, I have a couple more tutorials I might make in the near future - one is on calculations of linear lines (rolls of the tongue doesn't it?) - finding the gradient of a line etc. - and one on something I'm developing in VB6 - Artificial Neural Networking or for those who speak English - a program that learns from it's mistake, an emulator of the brain etc. I may also do one on circle and oval equations which I have found VERY useful at times.


    Enjoy!

  2. #2
    Hyperactive Member metalmidget's Avatar
    Join Date
    Mar 2007
    Location
    Melbourne, Australia
    Posts
    342

    Re: Simple Maths Tutorial (Trigonometry)

    I only skimmed over the tutorial, but it looks good so far. My only suggestion is that you think about your audience. This is posted in the games and graphics section of a forum. How about you take what you've got so far and then add to it to describe how this knowledge can be applied to games programming? Perhaps motion at an angle (actually scratch that there's a tut already on that). Maybe something to do with objects rebounding from surfaces at certain angles?

    metal

  3. #3
    Frenzied Member
    Join Date
    Mar 2006
    Location
    Pennsylvania
    Posts
    1,069

    Re: Simple Maths Tutorial (Trigonometry)

    Quote Originally Posted by Ticho
    Back in Pythagoras's day, they did not know about irrational numbers so when someone asked him what if B and C equaled one, he was so angry that he couldn't work out the square root of two that he threw that man off a boat to his death.
    Is that true? Haha! Where'd you find that?

  4. #4

    Thread Starter
    New Member
    Join Date
    Jan 2008
    Location
    Sunny, Sunny England
    Posts
    4

    Re: Simple Maths Tutorial (Trigonometry)

    Hehe, as far as I know it's true but i can't remember where i found it out but it was in a text book so it should be more reliable than other sources.

    @metalmidget aye this isn't exactly relevant on it's own but I wasn't going to write a vector tutorial with this straight away. That's something for another day - busy trying to create a neural network atm.

  5. #5
    Super Moderator si_the_geek's Avatar
    Join Date
    Jul 2002
    Location
    Bristol, UK
    Posts
    37,191

    Re: Simple Maths Tutorial (Trigonometry)

    So that this doesn't get "lost" over time, I have moved it to our Tutorials forum.

  6. #6
    New Member
    Join Date
    Dec 2009
    Posts
    3

    Re: Simple Maths Tutorial (Trigonometry)

    Has anyone here used the anachronym "Sally Can Tell..." instead of SOH CAH TOA? I used it to teach trig at a technical college, and found it MUCH better because
    1) you don't need to memorize a lot of formulas, and
    2) the formulas are arranged FOR you, making it much easier to concentrate on the MATH!

    You can check out the tutorials for this method here:

    http://www.ehow.com/how_5520340_memo...sing-mind.html

    http://www.ehow.com/how_5227490_pass...own-sides.html

    http://www.ehow.com/how_5428511_pass...wn-angles.html

    I'd appreciate your evaluation of this method.

    Maranatha

  7. #7
    Member
    Join Date
    Jul 2012
    Posts
    52

    Re: Simple Maths Tutorial (Trigonometry)

    The SOH - CAH - TOA rules are very complicated to be explained you must provide a picture showing how it works.. so If you provide pictures the post will be much easier

  8. #8
    New Member
    Join Date
    Dec 2009
    Posts
    3

    Re: Simple Maths Tutorial (Trigonometry)

    You missed my point... I don't use SOH CAH TOA exactly because they ARE so hard to remember. I developed a method of learning the trig functions and rules without having to memorize more than a single sentance as a "memory jogger". Check out the tutorials and see how easy it can be.

    Maranatha

    Roger Mc

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  



Featured


Click Here to Expand Forum to Full Width

Survey posted by VBForums.