Results 1 to 39 of 39

Thread: Server 2003 Setup [Additional Question]

  1. #1

    Thread Starter
    Ex-Super Mod RobDog888's Avatar
    Join Date
    Apr 2001
    Location
    LA, Calif. Raiders #1 AKA:Gangsta Yoda™
    Posts
    60,710

    Question Server 2003 Setup [Additional Question]

    Ok, I finally got around to setting up Server 2003 on one of my systems
    and, being the network guru that I am, I dont have a domain yet
    so how do I set the server up during installation for a PDC? I am
    at the screen where it is prompting for the designation of either a
    Workgroup or a Domain. If I dont have a domain set up yet then
    how am I supposed to add it to one when it prompts me? Or am I
    supposed to select the Workgroup mode without a domain or not
    on a domain?

    I am running three systems in workgroup mode and tI want the
    fourth to be my server and add the other three to the new
    domain.


    Thanks for any input on this.
    Last edited by RobDog888; Oct 16th, 2004 at 07:40 PM.
    VB/Office Guru™ (AKA: Gangsta Yoda®)
    I dont answer coding questions via PM. Please post a thread in the appropriate forum.

    Microsoft MVP 2006-2011
    Office Development FAQ (C#, VB.NET, VB 6, VBA)
    Senior Jedi Software Engineer MCP (VB 6 & .NET), BSEE, CET
    If a post has helped you then Please Rate it!
    Reps & Rating PostsVS.NET on Vista Multiple .NET Framework Versions Office Primary Interop AssembliesVB/Office Guru™ Word SpellChecker™.NETVB/Office Guru™ Word SpellChecker™ VB6VB.NET Attributes Ex.Outlook Global Address ListAPI Viewer utility.NET API Viewer Utility
    System: Intel i7 6850K, Geforce GTX1060, Samsung M.2 1 TB & SATA 500 GB, 32 GBs DDR4 3300 Quad Channel RAM, 2 Viewsonic 24" LCDs, Windows 10, Office 2016, VS 2019, VB6 SP6

  2. #2
    Frenzied Member Ideas Man's Avatar
    Join Date
    Aug 2002
    Location
    Australia
    Posts
    1,718
    Yes select workgroup as if it's gonna be standalone. When Windows first boots up and you login, you'll get this nice setup screen, select Domain Controller from the list of roles you want it to have, fill in the blanks and it will install and configure all the required items. When it's finished, your server will then be a Domain Controller.

    After it's reboted, add the clients to the domain.
    I use Microsoft Visual Basic 2005. (Therefore, most code samples I provide will be based around the .NET Framework v2.0, unless otherwise specified)

  3. #3
    Retired VBF Adm1nistrator plenderj's Avatar
    Join Date
    Jan 2001
    Location
    Dublin, Ireland
    Posts
    10,359
    Well during setup, if you want the server to be your DC, just select domain and make it your DC...
    Microsoft MVP : Visual Developer - Visual Basic [2004-2005]

  4. #4
    Frenzied Member Ideas Man's Avatar
    Join Date
    Aug 2002
    Location
    Australia
    Posts
    1,718
    That won't work because setup asks you to join a domain or workgroup, not host one (become DC).
    I use Microsoft Visual Basic 2005. (Therefore, most code samples I provide will be based around the .NET Framework v2.0, unless otherwise specified)

  5. #5
    Retired VBF Adm1nistrator plenderj's Avatar
    Join Date
    Jan 2001
    Location
    Dublin, Ireland
    Posts
    10,359
    Does it?
    Bah its been to long
    Microsoft MVP : Visual Developer - Visual Basic [2004-2005]

  6. #6
    Frenzied Member Ideas Man's Avatar
    Join Date
    Aug 2002
    Location
    Australia
    Posts
    1,718
    You're most probably thinking of the old NT days, where when you installed the OS, you specified whether it was a DC, PDC or a member server and the only way of changing was a complete re-install. Server 2003 you can change it very easily simply by clicking a couple of buttons inside an easy to follow wizard.
    I use Microsoft Visual Basic 2005. (Therefore, most code samples I provide will be based around the .NET Framework v2.0, unless otherwise specified)

  7. #7
    Retired VBF Adm1nistrator plenderj's Avatar
    Join Date
    Jan 2001
    Location
    Dublin, Ireland
    Posts
    10,359
    Yeah I've a few 2003 servers that I installed in here, but its just been so long
    Microsoft MVP : Visual Developer - Visual Basic [2004-2005]

  8. #8

    Thread Starter
    Ex-Super Mod RobDog888's Avatar
    Join Date
    Apr 2001
    Location
    LA, Calif. Raiders #1 AKA:Gangsta Yoda™
    Posts
    60,710
    Ideas Man has it right about not being able to add it to a domain
    until after it is set up. It would try to add itself to a domain but
    would error out saying that it didnt exist. This was my problem,
    but thanks to everyones input I think I know what to do next. I
    may still have some questions when I get to setting up the
    domain. So until then thanks guys.

    VB/Office Guru™ (AKA: Gangsta Yoda®)
    I dont answer coding questions via PM. Please post a thread in the appropriate forum.

    Microsoft MVP 2006-2011
    Office Development FAQ (C#, VB.NET, VB 6, VBA)
    Senior Jedi Software Engineer MCP (VB 6 & .NET), BSEE, CET
    If a post has helped you then Please Rate it!
    Reps & Rating PostsVS.NET on Vista Multiple .NET Framework Versions Office Primary Interop AssembliesVB/Office Guru™ Word SpellChecker™.NETVB/Office Guru™ Word SpellChecker™ VB6VB.NET Attributes Ex.Outlook Global Address ListAPI Viewer utility.NET API Viewer Utility
    System: Intel i7 6850K, Geforce GTX1060, Samsung M.2 1 TB & SATA 500 GB, 32 GBs DDR4 3300 Quad Channel RAM, 2 Viewsonic 24" LCDs, Windows 10, Office 2016, VS 2019, VB6 SP6

  9. #9
    Frenzied Member Ideas Man's Avatar
    Join Date
    Aug 2002
    Location
    Australia
    Posts
    1,718
    No problem. I'll be happy to help if you have any more troubles with it.

    Don't forget to change the icon to the green checkmark ()
    I use Microsoft Visual Basic 2005. (Therefore, most code samples I provide will be based around the .NET Framework v2.0, unless otherwise specified)

  10. #10

    Thread Starter
    Ex-Super Mod RobDog888's Avatar
    Join Date
    Apr 2001
    Location
    LA, Calif. Raiders #1 AKA:Gangsta Yoda™
    Posts
    60,710
    How about [Semi-Resolved] since I will have more questions
    on this and this way the history will be in the same thread.

    There are going to be more setup questions coming today. I just
    know it.
    VB/Office Guru™ (AKA: Gangsta Yoda®)
    I dont answer coding questions via PM. Please post a thread in the appropriate forum.

    Microsoft MVP 2006-2011
    Office Development FAQ (C#, VB.NET, VB 6, VBA)
    Senior Jedi Software Engineer MCP (VB 6 & .NET), BSEE, CET
    If a post has helped you then Please Rate it!
    Reps & Rating PostsVS.NET on Vista Multiple .NET Framework Versions Office Primary Interop AssembliesVB/Office Guru™ Word SpellChecker™.NETVB/Office Guru™ Word SpellChecker™ VB6VB.NET Attributes Ex.Outlook Global Address ListAPI Viewer utility.NET API Viewer Utility
    System: Intel i7 6850K, Geforce GTX1060, Samsung M.2 1 TB & SATA 500 GB, 32 GBs DDR4 3300 Quad Channel RAM, 2 Viewsonic 24" LCDs, Windows 10, Office 2016, VS 2019, VB6 SP6

  11. #11

    Thread Starter
    Ex-Super Mod RobDog888's Avatar
    Join Date
    Apr 2001
    Location
    LA, Calif. Raiders #1 AKA:Gangsta Yoda™
    Posts
    60,710
    Doh! I knew it. Here is another related question.

    I also want to host my own website. Can I do it with the PDC as I
    have just finished loading it, or do I need to install Server 2003
    Web Edition. I have it on another CD.

    I am reading through the server roles I thats where it says if you
    want to host websites or services you need...

    So do I have to install the W.E. on the same server? or can I do it
    just with the server role of PDC?

    Thanks for your help and patience.
    VB/Office Guru™ (AKA: Gangsta Yoda®)
    I dont answer coding questions via PM. Please post a thread in the appropriate forum.

    Microsoft MVP 2006-2011
    Office Development FAQ (C#, VB.NET, VB 6, VBA)
    Senior Jedi Software Engineer MCP (VB 6 & .NET), BSEE, CET
    If a post has helped you then Please Rate it!
    Reps & Rating PostsVS.NET on Vista Multiple .NET Framework Versions Office Primary Interop AssembliesVB/Office Guru™ Word SpellChecker™.NETVB/Office Guru™ Word SpellChecker™ VB6VB.NET Attributes Ex.Outlook Global Address ListAPI Viewer utility.NET API Viewer Utility
    System: Intel i7 6850K, Geforce GTX1060, Samsung M.2 1 TB & SATA 500 GB, 32 GBs DDR4 3300 Quad Channel RAM, 2 Viewsonic 24" LCDs, Windows 10, Office 2016, VS 2019, VB6 SP6

  12. #12
    Frenzied Member Ideas Man's Avatar
    Join Date
    Aug 2002
    Location
    Australia
    Posts
    1,718
    No you do not. Windows Sever 2003 Web Edition is designed specifically to host web sites, it can't do anything else in a sense. You can install that on another computer if you wish i.e. it's a cheaper licence than Standard or Enterprise. But you can also install it on your PDC (I did). Go back into the Manage Server dialog and add the Application Server role i think it is, it will say that it includes IIS. Add that role and your server will also be a web server.

    Yey!! My 800th Post
    I use Microsoft Visual Basic 2005. (Therefore, most code samples I provide will be based around the .NET Framework v2.0, unless otherwise specified)

  13. #13

    Thread Starter
    Ex-Super Mod RobDog888's Avatar
    Join Date
    Apr 2001
    Location
    LA, Calif. Raiders #1 AKA:Gangsta Yoda™
    Posts
    60,710
    on 800!

    I thought it was another component to install from the PDC and
    not another CD. The Web ed. CD was messing me up.

    So, I will go to Manage my server and add IIS from the
    Application Role. Anything else involved in setting up IIS?

    Thanks.
    VB/Office Guru™ (AKA: Gangsta Yoda®)
    I dont answer coding questions via PM. Please post a thread in the appropriate forum.

    Microsoft MVP 2006-2011
    Office Development FAQ (C#, VB.NET, VB 6, VBA)
    Senior Jedi Software Engineer MCP (VB 6 & .NET), BSEE, CET
    If a post has helped you then Please Rate it!
    Reps & Rating PostsVS.NET on Vista Multiple .NET Framework Versions Office Primary Interop AssembliesVB/Office Guru™ Word SpellChecker™.NETVB/Office Guru™ Word SpellChecker™ VB6VB.NET Attributes Ex.Outlook Global Address ListAPI Viewer utility.NET API Viewer Utility
    System: Intel i7 6850K, Geforce GTX1060, Samsung M.2 1 TB & SATA 500 GB, 32 GBs DDR4 3300 Quad Channel RAM, 2 Viewsonic 24" LCDs, Windows 10, Office 2016, VS 2019, VB6 SP6

  14. #14
    Frenzied Member Ideas Man's Avatar
    Join Date
    Aug 2002
    Location
    Australia
    Posts
    1,718
    Yes that's all you do and nope there's nothing else. If you want ASP.NET, check the box as it installs and install the updates from Microsoft Windows Update then you just gotta create your web sites etc. Very easy. You can still add additional components later if you want like the remote desktop connection web client or the SMTP server, FTP server etc.
    I use Microsoft Visual Basic 2005. (Therefore, most code samples I provide will be based around the .NET Framework v2.0, unless otherwise specified)

  15. #15

    Thread Starter
    Ex-Super Mod RobDog888's Avatar
    Join Date
    Apr 2001
    Location
    LA, Calif. Raiders #1 AKA:Gangsta Yoda™
    Posts
    60,710
    Thanks, Ideas Man. I will only need ASP.NET and HTTP services.
    Oh ya, and HTTPS also, but when I get there I will post again.

    Later.
    VB/Office Guru™ (AKA: Gangsta Yoda®)
    I dont answer coding questions via PM. Please post a thread in the appropriate forum.

    Microsoft MVP 2006-2011
    Office Development FAQ (C#, VB.NET, VB 6, VBA)
    Senior Jedi Software Engineer MCP (VB 6 & .NET), BSEE, CET
    If a post has helped you then Please Rate it!
    Reps & Rating PostsVS.NET on Vista Multiple .NET Framework Versions Office Primary Interop AssembliesVB/Office Guru™ Word SpellChecker™.NETVB/Office Guru™ Word SpellChecker™ VB6VB.NET Attributes Ex.Outlook Global Address ListAPI Viewer utility.NET API Viewer Utility
    System: Intel i7 6850K, Geforce GTX1060, Samsung M.2 1 TB & SATA 500 GB, 32 GBs DDR4 3300 Quad Channel RAM, 2 Viewsonic 24" LCDs, Windows 10, Office 2016, VS 2019, VB6 SP6

  16. #16

    Thread Starter
    Ex-Super Mod RobDog888's Avatar
    Join Date
    Apr 2001
    Location
    LA, Calif. Raiders #1 AKA:Gangsta Yoda™
    Posts
    60,710
    Finally got time to create the domain and I have a question.

    I am starting to create the Domain and it is prompting for this...



    Do I need to enter a dot com name or just the name I want for
    the domain? I want my domain to be called "DEVELOPMENT".

    Thanks.
    Attached Images Attached Images  
    VB/Office Guru™ (AKA: Gangsta Yoda®)
    I dont answer coding questions via PM. Please post a thread in the appropriate forum.

    Microsoft MVP 2006-2011
    Office Development FAQ (C#, VB.NET, VB 6, VBA)
    Senior Jedi Software Engineer MCP (VB 6 & .NET), BSEE, CET
    If a post has helped you then Please Rate it!
    Reps & Rating PostsVS.NET on Vista Multiple .NET Framework Versions Office Primary Interop AssembliesVB/Office Guru™ Word SpellChecker™.NETVB/Office Guru™ Word SpellChecker™ VB6VB.NET Attributes Ex.Outlook Global Address ListAPI Viewer utility.NET API Viewer Utility
    System: Intel i7 6850K, Geforce GTX1060, Samsung M.2 1 TB & SATA 500 GB, 32 GBs DDR4 3300 Quad Channel RAM, 2 Viewsonic 24" LCDs, Windows 10, Office 2016, VS 2019, VB6 SP6

  17. #17
    Frenzied Member Ideas Man's Avatar
    Join Date
    Aug 2002
    Location
    Australia
    Posts
    1,718
    Yes, just enter Development if that's what you want. You do not need to do all that extra stuff, can't exactly remember what it's used for, but in your case, it's unnecessary.
    I use Microsoft Visual Basic 2005. (Therefore, most code samples I provide will be based around the .NET Framework v2.0, unless otherwise specified)

  18. #18
    Retired VBF Adm1nistrator plenderj's Avatar
    Join Date
    Jan 2001
    Location
    Dublin, Ireland
    Posts
    10,359
    If you're going to be hosting a web project, its easier in the long-run to actually put in you FQDN.
    For example, our two domain controllers where I work are: nt1.everymancomputers.com and nt2.everymancomputers.com
    Microsoft MVP : Visual Developer - Visual Basic [2004-2005]

  19. #19

    Thread Starter
    Ex-Super Mod RobDog888's Avatar
    Join Date
    Apr 2001
    Location
    LA, Calif. Raiders #1 AKA:Gangsta Yoda™
    Posts
    60,710
    Yes, I want to host a website or two but I havent come up
    with the .coms for them yet. I thought I needed to put it in like
    this... computername.dotcomname.com. Not sure if I just enter
    DEVELOPMENT I wont have any issues later when I get
    the .coms?
    VB/Office Guru™ (AKA: Gangsta Yoda®)
    I dont answer coding questions via PM. Please post a thread in the appropriate forum.

    Microsoft MVP 2006-2011
    Office Development FAQ (C#, VB.NET, VB 6, VBA)
    Senior Jedi Software Engineer MCP (VB 6 & .NET), BSEE, CET
    If a post has helped you then Please Rate it!
    Reps & Rating PostsVS.NET on Vista Multiple .NET Framework Versions Office Primary Interop AssembliesVB/Office Guru™ Word SpellChecker™.NETVB/Office Guru™ Word SpellChecker™ VB6VB.NET Attributes Ex.Outlook Global Address ListAPI Viewer utility.NET API Viewer Utility
    System: Intel i7 6850K, Geforce GTX1060, Samsung M.2 1 TB & SATA 500 GB, 32 GBs DDR4 3300 Quad Channel RAM, 2 Viewsonic 24" LCDs, Windows 10, Office 2016, VS 2019, VB6 SP6

  20. #20
    Banned dglienna's Avatar
    Join Date
    Jun 2004
    Location
    Center of it all
    Posts
    17,901
    that sounds more like a workgroup name. I'd make it machine-specific, so that the machine doesn't matter to the domain.

  21. #21

    Thread Starter
    Ex-Super Mod RobDog888's Avatar
    Join Date
    Apr 2001
    Location
    LA, Calif. Raiders #1 AKA:Gangsta Yoda™
    Posts
    60,710
    I am getting ready to create a new domain on my server. I dont
    have an existing domain yet or a dot com name either. I want my
    network domain to be named "DEVELOPMENT" and my server
    name is APSDEV. If I dont enter a FQDN will I have issues later
    when I get my dot com name and start hosting sites?
    VB/Office Guru™ (AKA: Gangsta Yoda®)
    I dont answer coding questions via PM. Please post a thread in the appropriate forum.

    Microsoft MVP 2006-2011
    Office Development FAQ (C#, VB.NET, VB 6, VBA)
    Senior Jedi Software Engineer MCP (VB 6 & .NET), BSEE, CET
    If a post has helped you then Please Rate it!
    Reps & Rating PostsVS.NET on Vista Multiple .NET Framework Versions Office Primary Interop AssembliesVB/Office Guru™ Word SpellChecker™.NETVB/Office Guru™ Word SpellChecker™ VB6VB.NET Attributes Ex.Outlook Global Address ListAPI Viewer utility.NET API Viewer Utility
    System: Intel i7 6850K, Geforce GTX1060, Samsung M.2 1 TB & SATA 500 GB, 32 GBs DDR4 3300 Quad Channel RAM, 2 Viewsonic 24" LCDs, Windows 10, Office 2016, VS 2019, VB6 SP6

  22. #22
    Frenzied Member Ideas Man's Avatar
    Join Date
    Aug 2002
    Location
    Australia
    Posts
    1,718
    No. Remember, the domain is tacked onto the end of a computer name to make the FQDN. So in your case, your server would be called APSDEV.DEVELOPMENT. You don't need your domain to be the same as your internet domain name if you don't want to, it will still work.
    I use Microsoft Visual Basic 2005. (Therefore, most code samples I provide will be based around the .NET Framework v2.0, unless otherwise specified)

  23. #23

    Thread Starter
    Ex-Super Mod RobDog888's Avatar
    Join Date
    Apr 2001
    Location
    LA, Calif. Raiders #1 AKA:Gangsta Yoda™
    Posts
    60,710
    Sorry for being a complete n00b but I just enter DEVELOPMENT or
    APSDEV.DEVELOPMENT? I want DEVELOPMENT to be the actual
    domain name for my network.

    Thanks.
    VB/Office Guru™ (AKA: Gangsta Yoda®)
    I dont answer coding questions via PM. Please post a thread in the appropriate forum.

    Microsoft MVP 2006-2011
    Office Development FAQ (C#, VB.NET, VB 6, VBA)
    Senior Jedi Software Engineer MCP (VB 6 & .NET), BSEE, CET
    If a post has helped you then Please Rate it!
    Reps & Rating PostsVS.NET on Vista Multiple .NET Framework Versions Office Primary Interop AssembliesVB/Office Guru™ Word SpellChecker™.NETVB/Office Guru™ Word SpellChecker™ VB6VB.NET Attributes Ex.Outlook Global Address ListAPI Viewer utility.NET API Viewer Utility
    System: Intel i7 6850K, Geforce GTX1060, Samsung M.2 1 TB & SATA 500 GB, 32 GBs DDR4 3300 Quad Channel RAM, 2 Viewsonic 24" LCDs, Windows 10, Office 2016, VS 2019, VB6 SP6

  24. #24
    Banned dglienna's Avatar
    Join Date
    Jun 2004
    Location
    Center of it all
    Posts
    17,901
    I'm pretty sure that you don't need the aspdev. Development will be the domain name, and all computers in it will have their name in place of aspdev.

  25. #25
    Frenzied Member Ideas Man's Avatar
    Join Date
    Aug 2002
    Location
    Australia
    Posts
    1,718
    I'll clarify it again, APSDEV was the computer name you used for your server, a FQDN consists of ComputerName.Domain so when I said APSDEV.DEVELOPMENT, I was referring to the FQDN for that computer, your domain is Development, add that when it asks for it.
    I use Microsoft Visual Basic 2005. (Therefore, most code samples I provide will be based around the .NET Framework v2.0, unless otherwise specified)

  26. #26

    Thread Starter
    Ex-Super Mod RobDog888's Avatar
    Join Date
    Apr 2001
    Location
    LA, Calif. Raiders #1 AKA:Gangsta Yoda™
    Posts
    60,710
    I finally got around to creating the domain. Now I get this message
    about DNS...




    I am running DNS on my Linksys router. Wont
    this be a problem if I have DNS on the server too?
    Attached Images Attached Images  
    VB/Office Guru™ (AKA: Gangsta Yoda®)
    I dont answer coding questions via PM. Please post a thread in the appropriate forum.

    Microsoft MVP 2006-2011
    Office Development FAQ (C#, VB.NET, VB 6, VBA)
    Senior Jedi Software Engineer MCP (VB 6 & .NET), BSEE, CET
    If a post has helped you then Please Rate it!
    Reps & Rating PostsVS.NET on Vista Multiple .NET Framework Versions Office Primary Interop AssembliesVB/Office Guru™ Word SpellChecker™.NETVB/Office Guru™ Word SpellChecker™ VB6VB.NET Attributes Ex.Outlook Global Address ListAPI Viewer utility.NET API Viewer Utility
    System: Intel i7 6850K, Geforce GTX1060, Samsung M.2 1 TB & SATA 500 GB, 32 GBs DDR4 3300 Quad Channel RAM, 2 Viewsonic 24" LCDs, Windows 10, Office 2016, VS 2019, VB6 SP6

  27. #27
    Banned dglienna's Avatar
    Join Date
    Jun 2004
    Location
    Center of it all
    Posts
    17,901
    I think I had the same problem when configuring W2K with my cable modem as I didn't have a static address, which I think is required. Not sure, though. (MANY YEARS AGO)
    That's why I never implemented Active Directory, too. (I did have it running for a few weeks, but re-installed due to problems.)

  28. #28

    Thread Starter
    Ex-Super Mod RobDog888's Avatar
    Join Date
    Apr 2001
    Location
    LA, Calif. Raiders #1 AKA:Gangsta Yoda™
    Posts
    60,710
    So you cant have AD without DNS?
    VB/Office Guru™ (AKA: Gangsta Yoda®)
    I dont answer coding questions via PM. Please post a thread in the appropriate forum.

    Microsoft MVP 2006-2011
    Office Development FAQ (C#, VB.NET, VB 6, VBA)
    Senior Jedi Software Engineer MCP (VB 6 & .NET), BSEE, CET
    If a post has helped you then Please Rate it!
    Reps & Rating PostsVS.NET on Vista Multiple .NET Framework Versions Office Primary Interop AssembliesVB/Office Guru™ Word SpellChecker™.NETVB/Office Guru™ Word SpellChecker™ VB6VB.NET Attributes Ex.Outlook Global Address ListAPI Viewer utility.NET API Viewer Utility
    System: Intel i7 6850K, Geforce GTX1060, Samsung M.2 1 TB & SATA 500 GB, 32 GBs DDR4 3300 Quad Channel RAM, 2 Viewsonic 24" LCDs, Windows 10, Office 2016, VS 2019, VB6 SP6

  29. #29
    Frenzied Member Ideas Man's Avatar
    Join Date
    Aug 2002
    Location
    Australia
    Posts
    1,718
    No you can't. Active Directory relies on DNS so you cannot use it w/o it. You don't need to use the Microsoft DNS services, but it makes life a lot easier.
    I use Microsoft Visual Basic 2005. (Therefore, most code samples I provide will be based around the .NET Framework v2.0, unless otherwise specified)

  30. #30

    Thread Starter
    Ex-Super Mod RobDog888's Avatar
    Join Date
    Apr 2001
    Location
    LA, Calif. Raiders #1 AKA:Gangsta Yoda™
    Posts
    60,710
    So then I wil set it up, but wont that interfere with my Linksys router?
    VB/Office Guru™ (AKA: Gangsta Yoda®)
    I dont answer coding questions via PM. Please post a thread in the appropriate forum.

    Microsoft MVP 2006-2011
    Office Development FAQ (C#, VB.NET, VB 6, VBA)
    Senior Jedi Software Engineer MCP (VB 6 & .NET), BSEE, CET
    If a post has helped you then Please Rate it!
    Reps & Rating PostsVS.NET on Vista Multiple .NET Framework Versions Office Primary Interop AssembliesVB/Office Guru™ Word SpellChecker™.NETVB/Office Guru™ Word SpellChecker™ VB6VB.NET Attributes Ex.Outlook Global Address ListAPI Viewer utility.NET API Viewer Utility
    System: Intel i7 6850K, Geforce GTX1060, Samsung M.2 1 TB & SATA 500 GB, 32 GBs DDR4 3300 Quad Channel RAM, 2 Viewsonic 24" LCDs, Windows 10, Office 2016, VS 2019, VB6 SP6

  31. #31
    Banned dglienna's Avatar
    Join Date
    Jun 2004
    Location
    Center of it all
    Posts
    17,901
    I took it to mean that AD requires the same IP address, all of the time. If you have a static IP address, then just connect it directly to the server, and run the router FROM another port.

  32. #32
    Frenzied Member Ideas Man's Avatar
    Join Date
    Aug 2002
    Location
    Australia
    Posts
    1,718
    Yes it will. It is possible to tell Active Directory that you have a DNS server somewhere else on the network, you just have to ensure that Active Directory can read and write to the one on the router, if it can't, then you will need to set it up on the same computer.

    Another method would be to install it and try and get it to 'synchronize' with your DNS server on the router, if that's even possible, I'd say it is.
    I use Microsoft Visual Basic 2005. (Therefore, most code samples I provide will be based around the .NET Framework v2.0, unless otherwise specified)

  33. #33

    Thread Starter
    Ex-Super Mod RobDog888's Avatar
    Join Date
    Apr 2001
    Location
    LA, Calif. Raiders #1 AKA:Gangsta Yoda™
    Posts
    60,710
    Sorry guys, I was confusing DNS with DHCP. My router is in control
    of DHCP and I have a statice IP from my ISP. Is ther a way to set
    things up so everything goes to the server and then distributes
    to the workstations on the network?

    Would this be the more secure setup or keep it the way it
    currently is where all workstations / server get their IP from the
    router and are directly getting internet from the router?

    Would the first suggestion of everything going through the server
    be slower for the workstations?

    Thanks.
    VB/Office Guru™ (AKA: Gangsta Yoda®)
    I dont answer coding questions via PM. Please post a thread in the appropriate forum.

    Microsoft MVP 2006-2011
    Office Development FAQ (C#, VB.NET, VB 6, VBA)
    Senior Jedi Software Engineer MCP (VB 6 & .NET), BSEE, CET
    If a post has helped you then Please Rate it!
    Reps & Rating PostsVS.NET on Vista Multiple .NET Framework Versions Office Primary Interop AssembliesVB/Office Guru™ Word SpellChecker™.NETVB/Office Guru™ Word SpellChecker™ VB6VB.NET Attributes Ex.Outlook Global Address ListAPI Viewer utility.NET API Viewer Utility
    System: Intel i7 6850K, Geforce GTX1060, Samsung M.2 1 TB & SATA 500 GB, 32 GBs DDR4 3300 Quad Channel RAM, 2 Viewsonic 24" LCDs, Windows 10, Office 2016, VS 2019, VB6 SP6

  34. #34
    Frenzied Member Ideas Man's Avatar
    Join Date
    Aug 2002
    Location
    Australia
    Posts
    1,718
    If you can provide a proxy for the server so the computers to access the internet via the server, there's no problems with that. If you wanna setup DHCP on your server and disable the one on the router, that's fine too (I'd actually recommend this). This way you can let your clients get their IP addresses from your server so you can centrally manage them and if you want them to have direct access to the internet, put your routers IP address as the default gateway in the server properties and they will access it for the internet.
    I use Microsoft Visual Basic 2005. (Therefore, most code samples I provide will be based around the .NET Framework v2.0, unless otherwise specified)

  35. #35
    Banned dglienna's Avatar
    Join Date
    Jun 2004
    Location
    Center of it all
    Posts
    17,901
    I don't think that AD would like the IP from the router. Maybe if all of the network were behind the router, they could still talk to each other, but they would prolly be problems connecting outside of the network. I'm not positive, but I think it is the case (but I think that I may NOT have had a router back then, just a hub, and the cable modem and its 192.168.0.1 address for my server)

    If you use DHCP on the server, then you'd still be able to see everything else, so I'd recommend it.

    You would probably need more IP addreses for the other machines to talk to computers outside of your LAN. We have 4 with our DSL, so I may set up our server there, and do things remotely in the near future)

    I didn't have AV software for the server, in the past, also!

  36. #36
    Frenzied Member Ideas Man's Avatar
    Join Date
    Aug 2002
    Location
    Australia
    Posts
    1,718
    As long as he places the IP address of the router in the Default Gateway address for the DHCP clients, they will be able to access the internet.

    And yes, it is highly recommended to give your server a static IP, is you do end up using the router as your DHCP server, find out how to restrict or reserve the IP you assign to your server.

    Yey! My 900th post
    I use Microsoft Visual Basic 2005. (Therefore, most code samples I provide will be based around the .NET Framework v2.0, unless otherwise specified)

  37. #37

    Thread Starter
    Ex-Super Mod RobDog888's Avatar
    Join Date
    Apr 2001
    Location
    LA, Calif. Raiders #1 AKA:Gangsta Yoda™
    Posts
    60,710
    So I should turn the routers DHCP off and then assign the server
    a static IP with a default gateway of the router IP. Then assign
    the default gateway to the routers IP address in the servers
    DHCP settings so all workstations obtain an IP address from the
    server.

    The router can filter specific IP address / ranges for outgoing
    access. This may be a problem if the server assigns an invalid
    address range. Is there a way to setup DHCP on the server to
    assign specific IP ranges?

    Thanks.
    VB/Office Guru™ (AKA: Gangsta Yoda®)
    I dont answer coding questions via PM. Please post a thread in the appropriate forum.

    Microsoft MVP 2006-2011
    Office Development FAQ (C#, VB.NET, VB 6, VBA)
    Senior Jedi Software Engineer MCP (VB 6 & .NET), BSEE, CET
    If a post has helped you then Please Rate it!
    Reps & Rating PostsVS.NET on Vista Multiple .NET Framework Versions Office Primary Interop AssembliesVB/Office Guru™ Word SpellChecker™.NETVB/Office Guru™ Word SpellChecker™ VB6VB.NET Attributes Ex.Outlook Global Address ListAPI Viewer utility.NET API Viewer Utility
    System: Intel i7 6850K, Geforce GTX1060, Samsung M.2 1 TB & SATA 500 GB, 32 GBs DDR4 3300 Quad Channel RAM, 2 Viewsonic 24" LCDs, Windows 10, Office 2016, VS 2019, VB6 SP6

  38. #38
    Frenzied Member Ideas Man's Avatar
    Join Date
    Aug 2002
    Location
    Australia
    Posts
    1,718
    If you want to do that, yes, that's perfectly fine and yes you can configure special ranges on your DHCP server for it to hand out.
    I use Microsoft Visual Basic 2005. (Therefore, most code samples I provide will be based around the .NET Framework v2.0, unless otherwise specified)

  39. #39
    Banned dglienna's Avatar
    Join Date
    Jun 2004
    Location
    Center of it all
    Posts
    17,901
    I think that you can supply MAC addresses to map to IP addresses.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  



Click Here to Expand Forum to Full Width