NES Controller to PC

[cid]

I modding a NES controller to a parrallel cable so I can use the NES Controller on my pc.
Here are the schematics Im using:
http://www.heggeseth.com/controller_files/schematic.jpg

The only problem is I cut up the parrallel cable before looking at the cable diagram so I have all of these color coded wires coming out of a 25 pin parrallel(male). And if you look at the diagram it explains the wires as db25-9 and stuff. I need a diagram that shows what color wire coresponds with what pin on the cable.

[IntelSucks]

Operation UnSUCKcessful

[Lightning]

Try opening the connector, or measure it with a multi-meter, ik won't take more than 10 mins of your life

[cid]

Well I just ended up cutting the rubber awaw and just left the metal connector and cut away the wires and sodered to the pins directly. I suck at soldering so Im going to have to try it again probably tomorrow.